• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.429-433
• /
• 2014

As the fabrication technology used in FPDs(flat-panel displays) advances, the size of these panels is increasing and the pattern size is decreasing to the um range. Accordingly, a cleaning process during the FPD fabrication process is becoming more important to prevent yield reductions. The purpose of this study is to develop a FPD cleaning system and a cleaning process using a two-phase flow. The FPD cleaning system consists of two parts, one being a cleaning part which includes a two-phase flow nozzle, and the other being a drying part which includes an air-knife and a halogen lamp. To evaluate the particle removal efficiency by means of two-phase flow cleaning, silica particles $1.5{\mu}m$ in size were contaminated onto a six-inch silicon wafer and a four-inch glass wafer. We conducted cleaning processes under various conditions, i.e., DI water and nitrogen gas at different pressures, using a two-phase-flow nozzle with a gap distance between the nozzle and the substrate. The drying efficiency was also tested using the air-knife with a change in the gap distance between the air-knife and the substrate to remove the DI water which remained on the substrate after the two-phase-flow cleaning process. We obtained high efficiency in terms of particle removal as well as good drying efficiency through the optimized conditions of the two-phase-flow cleaning and air-knife processes.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.20-25
• /
• 2002

We performed a basic experiment for rapid, on-line, real-time measurement of HBsAg by using a surface plasmon resonance biosensor to quantify the recognition and interaction of biomolecules. We immobilized the anti-HBsAg polyclonal antibody to the dextran layer on a CM5 chip surface which was pre-activated by N-hydroxysuccinimide for amine coupling. The binding of the HBsAg to the immobilized antibody was measured by the mass increase detected by the change in the SPR signal. The binding characteristics between HBsAg and its antibody followed typical monolayer adsorption isotherm. When the entire immobilized antibody was interacted, there was no additional, non-specific binding observed, which suggested the biointeraction was very specific as expected and independent of the ligand density. No significant steric hindrance was observed at 17.6 nm/$mm^2$ immobilization density. The relationship between the HBsAg concentration in the sample solution and the antigen bound to the chip surface was linear up to ca. $40\mu\textrm{g}$/mL, which is much wider than that of the ELISA method. It appeared the antigen-antibody binding was increased as the immobilized ligand density increased, but verification is warranted. This study showed the potential of this biosensor-based method as a rapid, simple, multi-sample, on-line assay. Once properly validated, it can serve as a more powerful method for HBsAg quantification replacing the current ELISA method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.9
• /
• pp.1317-1324
• /
• 1998

In general, DI gasoline engine has the advantages of higher power output, higher thermal efficiency, higher EGR tolerance and lower emissions due to the operation characteristics of increased volumetric efficiency, compression ratio and ultra-lean combustion scheme. In order to apply the concept of stratified charge into direct injection gasoline engine, some kinds of methodologies have been adapted in various papers. In this study, a reflector was adapted around the injector nozzle to apply the concept of stratified charge combustion which leads the air-fuel mixture to be rich near spark plug. Therefore, the mixture near the spark plug is locally rich to ignite while the lean mixture is wholly introduced into the combustion chamber. The characteristics of combustion is analyzed with the variations of fuel injection pressure and load in a stratified -charge direct injection single cylinder gasoline engine. The obtained results are summarized as follows ; 1. The MBT spark timing approached to TDC with the increase of load on account of the increase of evaporation energy, but has little relation with fuel injection pressure. 2. The stratification effects are apparent with the increase of injection pressure. It is considered by the development of secondary diffusive combustion and the increase of heat release of same region, but proceed rapidly than diesel engine. Especially, in the case of high pressure injection (l70bar) and high load (3.0kgf m), the diffusive combustion parts are developed excessively and results in the decrease of peak pressure than in the case of middle load. 3. The index of engine stability, COVimep value, is drastically decreased with the increase of load. 4. To get better performance of DI gasoline engine development, staged optimizaion must be needed such as injection pressure, reflector, intake swirl, injection timing, chamber shape, ignition system and so on. In this study, the I50bar injection pressure is appeared as the optimum.

• Journal of Acupuncture Research
• /
• v.25 no.5
• /
• pp.1-16
• /
• 2008

Backgrounds : There have not been so many studies about the correlation of logical background between acupuncture and herbal medicine. Objectives : This study was aimed to find out the logical relationship between acupuncture points of Wushijiuyu(五十九兪) and Fangfengtongshengsan(防風通聖散) for the treatment of fever disease. Methods : I investigated the background of rationale of Wushijiuyu(五十九兪) and Fangfengtongshengsan(防風通聖散) through survey of classical text include Yellow Emperor's Classic of Medicine(.帝.經內經, Hwang Di Nei Jing), Liujing(類經), Zhenjiujiayijing(鍼灸甲乙經) and Huangdisuwenxuanmingfanglun(黃帝素問宣明方論). Results & Conclusions : The words "Wushijiuyu(五十九兪) and Wushijiuci(五十九刺)" are founded in the Yellow Emperor's Classic of Medicine(黃帝內經) are either prescription of the acupuncture points for the treatment of fever disease. However, acupuncture points of two methods are not same. According to Liujing(類經), Wushijiuyu(五十九兪) have used acupuncture points located in head, upper and lower extremities, trunk, and back. However Wushijiuci(五十九刺) just select acupuncture points of head and extremities without those of trunk and back. Acupuncture points located in yang meridian(45points) and Dumai(督脈, 5points) are significantly used more than those of yin meridian(8 points) and Renmai(任脈, 2points) in Wushijiuyu(五十九兪) and Wushijiuci(五十九刺). The distribution of acupuncture points used Wushijiuyu(五十九兪) have closer correlation with Fangfengtongshengsan(防風通聖散) than Wushijiuci(五十九刺) in the prescription.

• Archives of Pharmacal Research
• /
• v.26 no.6
• /
• pp.471-477
• /
• 2003

Three phospholipids (4-6) and three aromatic amines (1-3) were obtained from the methanol extract of Bombycis corpus. Based on spectral data, their structures have been elucidated as nicotiamide (1), cytidine (2), adenine (3), 1-Ο-(9Z-octadecenoyl)-2-Ο-(8Z,11Z-octadecadienoyl)-sn-glycero-3-phosphorylcholine (4), 1,2-di-Ο-hexadecanoyl-sn-glycero-3-phosphorylcholine (5) and 1,2-di-Ο-9Z-octadecenoyl-sn-glycero-3-phosphorylcholine (6). We examined the effects of compounds on synthesis of NGF in cultured astrocytes. By RT-PCR analysis, expresison of NGF mRNA in astrocytes cultured in serum-starvation increased after the addition of phospholipid (10 $\mu$M). The NGF content in the culture medium was significantly increased by compound 5, compared with the control value. These results suggest that three phospholipid compounds isolated from the methanol extract of Bombycis corpus may exert neurotrophic effects by stimulation of NGF synthesis in astrocytes.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.361-368
• /
• 2020

PURPOSE. The present study aimed to evaluate the accuracy of a desktop scanner and intraoral scanners based on the volumetric dimensions of a complete arch. MATERIALS AND METHODS. Seven reference models were fabricated based on the volumetric dimensions of complete arch (70%, 80%, 90%, 100%, 110%, 120%, and 130%). The reference models were digitized using an industrial scanner (Solutionix C500; MEDIT) for the fabrication of a computer-aided design (CAD) reference model (CRM). The reference models were digitized using three intraoral scanners (CS3600, Trios3, and i500) and one desktop scanner (E1) to fabricate a CAD test model (CTM). CRM and CTM were then superimposed using inspection software, and 3D analysis was conducted. For statistical analysis, one-way analysis of variance was used to verify the difference in accuracy based on the volumetric dimensions of the complete arch and the accuracy based on the scanners, and the differences among the groups were analyzed using the Tukey HSD test as a post-hoc test (α=.05). RESULTS. The three different scanners showed a significant difference in accuracy based on the volumetric dimensions of the complete arch (P<.05), but the desktop scanner did not show a significant difference in accuracy based on the volumetric dimensions of the complete arch (P=.808). CONCLUSION. The accuracy of the intraoral scanners was dependent on the volumetric dimensions of the complete arch, but the volumetric dimensions of the complete arch had no effect on the accuracy of the desktop scanner. Additionally, depending on the type of intraoral scanners, the accuracy differed according to the volumetric dimensions of the complete arch.

• SUVANNABHUMI
• /
• v.6 no.1
• /
• pp.193-221
• /
• 2014

Archipeligiality, a concept continuously being developed by the scholar, is one that attempts to articulate the Filipino sense of place as discoursed in/through its literatures. As a country composed of 7,107 islands, the very fragmentation and division of the country, as well as its multiculturality and multilinguality, have become the very means by which Filipino writers have "imagined" so to speak-that is, also, constructed, into a singular, united frame-the "nation." This, the author supposes, is an important aspect to explore when it comes to discoursing the larger Southeast Asian imagination, or poetic, as similar situations (i.e. Indonesia, Malaysia, and Singapore), may soon compel for a comparative critico-literary perspective. This paper continues this exploratory "geoliterary" discourse by looking at a Filipino canonical work in English by Cirilo F. Bautista, the epic The Trilogy of Saint Lazarus, the title of which already signals a geographic allusion to the first map-name granted by the Spanish colonizer to the Philippines in the region, and consequently the first signification of the country's subjected existence in the colonial imagination. The work, published between 1970 and 1998, is composed of three parts: The Archipelago, Telex Moon, and Sunlight on Broken Stones, which won the 1998 Philippine Independence Centennial Literary Prize. In these epics, notions of Philippine history and situation were discoursed, and Filipino historical figures were engaged in dialogue by the poet/the poet's voice, with the end of locating the place [where history and time had brought it; or its direction or trajectory as a nation, being true to the Filipino maxim of ang di lumingon sa pinanggalingan, di makararating sa paroroonan (the one who does not look back to his origins would not reach his destination)]. of the Philippines not only in the national imagination, but in this paper, in the wider regional consciousness. The paper proposes that the archipelagic concept is an important and unique characteristic of the Southeast Asian situation, and thus, may be a means to explicate the clearly connected landscapes of the region's imagination through literature. This paper focuses on Sunlight on Broken Stones.

• Archives of Pharmacal Research
• /
• v.15 no.3
• /
• pp.196-203
• /
• 1992

Intramolecular excimer formation of 1, 3-di(1-pyrenyl)propane (Py-3-Py) and fluorescence polarization of 1, 6-diphenyl-1, 3, 5-hexatriene (DPH) were used to investigate the effects of barbiturates on the fluidity of model membranes of phosphatidycholine (SPMVPC), phosphatidylserine (SPMVPS), and phosphatidylinositol (SPMVPI) fractions of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine cerebral cortex. In a dose-dependent manner, barbiturates decreased the excimer to monomer fluorescence intensity ratio (I'/I) of Py-3-Py and increased the anisotropy(r), rotational relaxation time (P), limiting anisotropy $(r_infty)$, and order parameter (S) of DPH in SPMVPC, SPMVPS and SPMVPI. This indicates that barbiturates decreased both the lateral and rotational diffusion of the probes in SPMVPC, SPMVPS and SPMVPI. The relative potencies of barbiturates in ordering the membranes were in the order: pentobarbital > hexobarbital > amobarbital > phenobarbital. This order correlates well with the anesthetic potencies of barbiturates and the potencies for enhancement of $\gamma$-aminobutyric acid-stimulated chloride uptake. Thus, it is strongly suggested that a close relationship might exist between the membrane ordering effects of barbiturates and the chloride fluxes across SPMV.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.187-190
• /
• 2005

The Cosmic Evolution Survey (COSMOS) is a Hubble Space Telescope (HST) treasury project. The COSMOS aims to perform a 2 square degree imaging survey of an equatorial field in I(F814W) band, using the Advanced Camera for Surveys (ACS). Such a wide field survey, combined with ground-based photometric and spectroscopic data, is essential to understand the interplay between large scale structure, evolution and formation of galaxies and dark matter. In 2004, we have obtained high-quality, broad band images of the COSMOS field (B, V, r', i', and z') using Suprime-Cam on the Subaru Telescope, and we have started our new optical multi-band program, COSMOS-21 in 2005. Here, we present a brief summary of the current status of the COSMOS project together with contributions from the Subaru Telescope. Our future Subaru program, COSMOS-21, is also discussed briefly.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.6
• /
• pp.643-647
• /
• 2014

Two types of fuel supply method ar used in CNG vehicles. One is premixed ignition and the other is gas-jet ignition. In premixed ignition, the fuel is introduced with intake air so that homogeneous air-fuel mixture may form. The ignitability of this method depends on the global equivalence ratio. In gas-jet ignition, CNG is introduced directly into the engine combustion chamber. The overall mixture is stratified by retarded fuel injection. In this study, a visualization technique was employed to obtain fundamental properties regarding overall mixture formation of direct injected CNG fuel inside a constant volume chamber. Jet angles, penetrations and projected jet area with respect to ambient pressure are investigated. The penetration decreases apparently and the time reaching the CVC wall was delayed as the chamber pressure increases. This is caused by the higher inertia of the fluid elements that the injected fluid must accelerate and push aside. It is same to liquid fuel such as diesel and gasoline, but this phenomenon is far more prominent for the gaseous fuel.