• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.100-104
• /
• 2012

Fin-type SONOS (silicon-oxide-nitride-oxide-silicon) flash memory has emerged as novel devices having superior controls over short channel effects(SCE) than the conventional SONOS flash memory devices. However despite these advantages, these also exhibit undesirable characteristics such as corner effect. Usually, the corner effect deteriorates the performance by increasing the leakage current. In this paper, the corner effect of fin-type SONOS flash memory devices is investigate by 3D Process and device simulation and their electrical characteristics are compared to conventional SONOS devices. The corner effect has been observed in fin-type SONOS device. The reason why the memory characteristic in fin-type SONOS flash memory device is not improved, might be due to existing undesirable effect such as corner effect as well as the mutual interference of electric field in the fin-type structure as reported previously.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.34-38
• /
• 2017

Objectives: The aim of this study was to evaluate the cyclic fatigue resistance of the ProTaper Universal D1 file (Dentsply Maillefer) under continuous and adaptive motion. Materials and Methods: Forty ProTaper Universal D1 files were included in this study. The cyclic fatigue tests were performed using a dynamic cyclic fatigue testing device, which had an artificial stainless steel canal with a $60^{\circ}$ angle of curvature and a 5 mm radius of curvature. The files were randomly divided into two groups (Group 1, Rotary motion; Group 2, Adaptive motion). The time to failure of the files were recorded in seconds. The number of cycles to failure (NCF) was calculated for each group. The data were statistically analyzed using Student's t-test. The statistical significant level was set at p < 0.05. Results: The cyclic fatigue resistance of the adaptive motion group was significantly higher than the rotary motion group (p < 0.05). Conclusion: Within the limitations of the present study, the 'Adaptive motion' significantly increased the resistance of the ProTaper Universal D1 file to cyclic facture.

• Asia-pacific Journal of Convergent Research Interchange
• /
• v.4 no.2
• /
• pp.1-12
• /
• 2018

Nowadays, the advent of smart devices equipped with the latest input technologies has changed the way users interact with smart devices. The gesture based user interface, as the natural user interface technologies, has attracted a lot of attention from researchers and developers. Gestures can be constituted in different ways; touching a screen, moving a pointing device, or making hand or body movements in a three-dimensional (3D) space. The various gesture input devices make application developers to maintain multiple source code families for the same applications adapting different gesture input devices. In this paper, we defined the gesture interface markup language (GIML) based on extensible markup language (XML) to describe gestures independently of the input devices. It also provides constraints necessary to determine which gesture has occurred and information required when UGesture platform interact with the gesture based application. The proposed GIML is based on our previous implemented the UGesture platform and the evaluation results, and so the GIML can be used to define new gestures for the UGesture platform and support new input hardwares.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2023

In the current era of the global mobile smart device revolution, electronic devices are required in all spaces that people interact with. The establishment of the internet of things (IoT) among smart devices has been recognized as a crucial objective to advance towards creating a comfortable and sustainable future society. In-mold electronic (IME) processes have gained significant industrial significance due to their ability to utilize conventional high-volume methods, which involve printing functional inks on 2D substrates, thermoforming them into 3D shapes, and injection-molded, manufacturing low-cost, lightweight, and functional components or devices. In this article, we provide an overview of IME and its latest advances in application. We review biomimetic nanomaterials for constructing self-supporting biosensor electronic materials on the body, energy storage devices, self-powered devices, and bio-monitoring technology from the perspective of in-mold electronic devices. We anticipate that IME device technology will play a critical role in establishing a human-machine interface (HMI) by converging with the rapidly growing flexible printed electronics technology, which is an integral component of the fourth industrial revolution.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.138-145
• /
• 2015

Although it is well-known that environmental noise can lead to hearing loss in individuals, the true extent of subway noise effects in the general population remains poorly understood. The purpose of the present study is to see changes of acoustic reflex thresholds and speech perception scores when passengers listen to music presented from their personal listening device in the subway. Forty subjects with normal hearing participated being divided into two groups, experimental and control groups. As a baseline, all subjects were measured by acoustic reflex thresholds in five test frequencies and Korean speech perception in noise (KSPIN) test at 0 and -5 dB SNR. In the experiment, the control group read newspaper or magazine in the subway noise, whereas the experimental group listened to music presented from their smartphone under the subway noise through speakers at 73.45 dBA for 60 min. After completing the experiment, two groups also conducted both acoustic reflex thresholds and KSPIN tests in the same condition as the baseline. The results showed that there was a significant difference of correct percent in speech-in-noise test between experimental and control groups and of that between two signal-to-noise ratios, which means the double noise exposure of 60 min might cause some degradation of speech perception when noise increases compared to only subway noise condition that was not statistically significant difference. We concluded that a risk of some degraded speech perception ability would be expected when passengers have a habit of listening to music in the subway noisy situation for a long duration.

• Convergence Security Journal
• /
• v.23 no.2
• /
• pp.67-74
• /
• 2023

An elevator is a mechanical and electronic device composed of about 20,000 various parts, and is systematically operated with a close relationship with each other. By intuitively understanding this complex elevator structure and efficiently recognizing the operating model, it will be possible to increase the understanding of the elevator system and the efficiency of maintenance. The existing elevator management system is a process of collecting and understanding information based on data generated from elevators, and has a structure that lacks efficiency in expressing and managing real-world information during elevator maintenance. Therefore, this paper proposes a simulator framework that can operate efficiently based on the actual elevator model. By constructing the recognition of specific objects through a 3D-based service model and visualizing the operation process, it will be possible to enhance the understanding of the structure and operation required for elevator operation. To this end, the core components of the elevator system are identified, the relationship between them and the operating method are visualized, and a simulator is implemented. Based on this, it will be possible to provide a realistic information management and operating environment in virtual space and real platform.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1492-1497
• /
• 2005

The goal of the trial was to evaluate the effects of ractopamine (20 ppm in the ration) given pregnant sows during three different pregnancy stages (T1: 25 to 50 d; T2: 50 to 80 d; T3: 25 to 80 d of gestation, and T4: control-no ractopamine) on fetal muscle development (through counts of the number of fibers of the semitendinosus muscle), on the growth and carcass characteristics of the progeny. Forty eight weaned piglets (12 per treatment) were assessed for number of muscle fibers, while performance and carcass characteristics were evaluated on a separate 48 animals (12 per treatment) grown to 100 kg. Animals produced by sows treated from 25 to 50 d of pregnancy (T1) resulted in non-significant increase of 6.85% in the number of muscle fibers in the semitendinosus muscle when compared to animals from the control group. Performance results were significantly different (p<0.05), and animals produced by sows from the T1 group gained more weight during the growth I stage (25 to 50 kg) and during the total period (6 to 100 kg) (991 vs. 903 grams, and 844 vs. 772 grams, respectively) when compared to controls. For carcass characteristics, results showed that animals produced by the T1 group of sows were heavier at slaughter (p<0.05) when compared to the controls (T4) (100.17 vs. 93.09 kg). There was a positive correlation between number of muscle fibers and bodyweights, carcass weights, Longissimus dorsi muscle depth and dressing out (0.80, 0.86, 0.67, and 0.50, respectively). Sows treated with ractopamine between 25 to 50 d of pregnancy produced piglets that performed better and had superior carcass characteristics than those produced by untreated sows. The ractopamine used for pregnancy sows (25 to 50 d) can be indicated as a device to increase the progeny performance.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.55-64
• /
• 1988

Stow nets have widely been used in the western sea of Korea from the olden age. The original structure of a stow net is a large square-sectional bag net made of 4 netting panels, and the front fringes of top and bottom panels are connected to the top and bottom beams respectively. Wire ropes, which is originated from the holding anchor are gradually forked and biforked, and finally 4 pieces of wire rope (biforked pendants) are jointed to each beam. Much convenience caused by long and heavy beams were problemed, then some studies have been carried out to improve the net since 1930's. The most effective improvement were achieved in 1980 by Mr. Han and his colleagues. The key point of improvement was that the beams were removed and the belt shaped shearing device made by canvas was attached to the side panels, the head rope and ground rope to the front fringe of top and bottom panel, and biforked pendants are joined to the shearing device. Even though this is the epoch-making improvement of a stow net, the further study should be required to find out more effective method. The authors carried out a model experiment on the stow net to determine the vertical and horizontal opening of a net mouth, and also examine the front, top and side-view configuration of the net. The model net was constructed depending on the Similarity Law of Fishing Gear in 1/10 and 1/20 scale and set against to the current at shallow and speedy flowing channel. The vertical and horizontal openings were determined by using scaled bamboo poles, and the configuration was observed by using specially prepared observation platform and underwater observation glass, and also photographed by using specially prepared underwater photographic equipment. The results obtained can be summarized as follows: 1. The opening height and width of the shearing device varied in accordance with the relative length of the biforked pendants. Considering the height and width of shearing device in 6 cases of the arrangement system of biforked pendants, the best result was obtained in the case that the 2nd, 3rd and 4th pendents from the bottom-most was 5%, 9% and 4% longer than that. 2. On the top-view configuration the excessive deformation of head rope and ground rope were observed. In the actual net, 54m long head rope and ground rope were attached to the front fringe of top and bottom panels so that the head rope may be lifted to make the net mouth open highly. But actually the head rope and the ground rope are streamed backward without any lift, and also the netting followed the ropes were deformed until the 2/5 in the whole length of the net. This deformation may be guessed to disturb the entrance of fish school into the net and also caused the net to get caught by obstacles in the sea bed and to be broken largely. 3. Hydrodynamic resistance R of the actual net may be deduced as R(kg)=29.2$\times$103 v1.65. It is also expressed as R(kg)=5.9$\times$d/l$\times$ab v1.65. depending on the formula deduced by Koyama to estimate the resistance of trawl nets, where d/l denote the ratio between diameter of netting twine and length of mesh leg in every part of side panel, a and b, the stretched circumference of the mouth and the stretched length of the net, respectively.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.245-253
• /
• 2012

The public and civilian demands regarding 3D geo-spatial information processing on mobile device including smartphone are increasing. But there are few actual implementations or application cases. This work is to present some results by a prototype implementation of 3D terrain information visualization function with satellite image and DEM using HTML5 WebGL, which is a web-based graphic library under the standardization process. This is a useful standard for cross-platform operation for 3D graphic rendering without other plug-in modules. As the results, in the different types of operating system or browser in a personal computer or a smartphone, it shows same rendering results, as long as they support HTML5 WebGL. As well;geo-metadata search and identification functions for data sets for 3D terrain visualization process are added in this implementation for the practical aspect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.1982-1990
• /
• 1994

We implemented a PLDRO(Phase Locked Dielectric Resonator Oscillator) using the concept of the feedback property of PLL(Phase Locked Loop) for Ku-band(10.95-11.70 GHz). The conventional approaches to a PLDRO design use varactor diode tuning method.. But in theis paper, the PLDRO has the advantage of the frequency sensitivity to changes in the supple voltage of the oscillating device without the frequency-variable part by varactor diode voltage-control. and uses a SPD(Sampling Phase Detector) for phase-comparision. The PLDRO is composed of the DRO phase-locked to the reference signal of UHF band by using a SPD for high frequency stability and can be available for European FSS(Fixed Satellite Service) at 10.00GHz. The PLDRO generates the output power of 8.67 dBm at 10.00 GHz and has a phase noise of -81 dBc/Hz at 10 kHz offset from carrier. The hamonic and spurious characteristics have -42.33 dBc and -65dBc respectively. This PLDRO has much better frequency stability, lower phase noise, and more economical effect for a satellite system than conventional DRO.