• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.28-31
• /
• 2018

In this paper, we have proposed and demonstrated a variable optical attenuator (VOA) incorporating a dual-fiber collimator and a bimetallic actuator. The optical attenuation between input and output single-mode fibers was tuned by tilting the angle of a reflection mirror fixed on the bimetal. The bimetal was heated or cooled by a thermoelectric cooler (TEC) and then moved the reflection mirror, due to bending and unreeling. The desired optical attenuation can be obtained through adjusting the electrical input into the TEC. The fabricated device showed 0.5 dB of insertion loss, 0.2 dB of maximum polarization-dependent loss, and 40 dB of dynamic range. The response time was measured to be about 5 s.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.4
• /
• pp.247-252
• /
• 2012

IGBT (insulated gate bipolar transistor) has been widely used around the power industry as it has good switching performance and its excellent conductance. In order to reduce power loss during switch turn-on state, it is essential to reduce its resistance. However, trade off relationship between breakdown voltage and device conductance is the greatest obstacle on the way of improvement. Floating island structure is one of the solutions. Still, under optimized device condition for the best performance, improvement rate is negligible. Therefore, this paper suggests adding trench gate on floating island structure to eliminate JFET (junction field effect transistor) area to reduce resistance and activate floating island effect. Experimental result by 2D simulation using TCAD, shows 20% improvement of turn-on state voltage drop.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.251-263
• /
• 2008

In this paper, we report an analytical modeling and 2-D Synopsys Sentaurus TCAD simulation of ion implanted silicon carbide MESFETs. The model has been developed to obtain the threshold voltage, drain-source current, intrinsic parameters such as, gate capacitance, drain-source resistance and transconductance considering different fabrication parameters such as ion dose, ion energy, ion range and annealing effect parameters. The model is useful in determining the ion implantation fabrication parameters from the optimization of the active implanted channel thickness for different ion doses resulting in the desired pinch off voltage needed for high drain current and high breakdown voltage. The drain current of approximately 10 A obtained from the analytical model agrees well with that of the Synopsys Sentaurus TCAD simulation and the breakdown voltage approximately 85 V obtained from the TCAD simulation agrees well with published experimental results. The gate-to-source capacitance and gate-to-drain capacitance, drain-source resistance and trans-conductance were studied to understand the device frequency response. Cut off and maximum frequencies of approximately 10 GHz and 29 GHz respectively were obtained from Sentaurus TCAD and verified by the Smith's chart.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.797-801
• /
• 2014

This research presented the concept of employing the punch-through diode triggered SCRs (PTTSCR) for low voltage ESD applications such as transient voltage suppression (TVS) devices. In order to demonstrate the better electrical properties, various traditional ESD protection devices, including a silicon controlled rectifier (SCR) and Zener diode, were simulated and analyzed by using the TCAD simulation software. The simulation result demonstrates that the novel PTTSCR device has better performance in responding to ESD properties, including DC dynamic resistance and capacitance, compared to SCR and Zener diode. Furthermore, the proposed PTTSCR device has a low reverse leakage current that is below $10^{-12}$ A, a low capacitance of $0.07fF/mm^2$, and low triggering voltage of 8.5 V at $5.6{\times}10^{-5}$ A. The typical properties couple with the holding voltage of 4.8 V, while the novel PTTSCR device is compatible for protecting the low voltage, high speed ESD protection applications. It proves to be good candidates as ultra-low capacitance TVS devices.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.201-206
• /
• 2004

Laser scanner are getting used for inspection and reverse engineering in industry such as motors, electronic products, dies and molds. However, due to the lack of efficient scanning technique, the tasks become limited to the low accuracy purpose. The main reasons for this limitation for usefulness are caused from the optical drawback, such as irregular reflection, scanning direction normal to measuring surface, the influence of surface integrity, and other optical disturbances. To overcome these drawback of laser scanner, this study propose the mechanism to reduce the optical trouble by using the 2 kinds of rotational movement axis and by composing the spherical coordinate to scanning the surface keeping normal direction consistently. So, it could be designed and interfaced the measuring device to realize that mechanism, and then it could acquisite the accurate 3D form cloud data. Also, these data are compared with the standard master ball and the data acquisited from the touch point sensor, to evaluate the accuracy and stability of measurement and to demonstrate the implementation of an dental tooth purpose system

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.124-130
• /
• 2008

Vector Graphics describes an image with mathematical statements instead of pixel information. Which enables easy scalability without loss in image quality and usually results in a much smaller file size compared with bitmap images. In this paper, we propose Vector Graphics Accelerator for mobile device with scan-line edge flag algorithm to render vector image without sorting process of edge. Proposed Vector Graphics Accelerator was verified with OpenVG 2D Vector image. The estimated processing time of proposed Accelerator with Tiger image is 12ms on Tessellation process, and total rendering time is 208ms. Estimated rendering performance with Tiger image is about 5 frame per second

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.4
• /
• pp.430-439
• /
• 2014

This study was performed to assess the perception and needs of the traditional Korean Medical Equipment (KME) in clinic. We conducted survey research among 15,550 traditional Korean medical doctors (KMD) responded to e-mail during 2 weeks. 899 participants the survey, consisting of questions regarding 'number of devices of the KME' and 'solution and improvement plan of the KME'. The participants were asked to choose their ranking of problems of the KME and also put a check mark in the column that the reasons for this choice. As results, final scores in priority ranking medical devices were derived in 7 categories. Physical therapy equipment and acupuncture treatment devices were included in high ranks. 42.8 % of the participants responded that the diagnostic medical devices seemed important in clinics and 67.4 % of the participants indicated that the therapeutic medical devices seemed to important in clinics. The identified problems of KME were 'low reproducibility and reliability of a diagnosis result (24.8%)' and 'uncertain validity of a diagnostic medical devices (20.5%)'. The improvement plan of the problems were 'to establish the law for using the medical devices (26.6%)' and 'evaluation of validity of the KME (26.2%)'. A survey of KMD revealed the condition of KME's number of devices and the solution plan for the problem of several KMEs. Understanding the needs of KMD could probably contribute to the research and development of KMEs in the future.

• The KIPS Transactions:PartD
• /
• v.18D no.2
• /
• pp.123-132
• /
• 2011

However a mobile application has limited compatibility to other platforms and device. So a mobile application should be rebuilt as particular restrictions of platforms or mobile phones when the mobile application is reused for other platforms. However a mobile application has limited compatibility to other platforms and device. So a mobile application should be rebuilt as particular restrictions of platforms or mobile phones when the mobile application is reused for other platforms. This paper ascertains problems when a mobile application is transplanted for reusing into other platforms, and suggests to evaluation systems of portability's quality that we can check the portability convenience of the existing mobile application. As we confirm its grade that shows convenience of suggested portability, we are able to check problems issued when a mobile application implants to other platforms. Then it is expected that we can check capability of rebuilding and endeavor rate. Also if the method will be considered at the first step of designing a mobile application, it will be the best way to develop the better mobile application that we can easily implant many other mobile platforms.

• Vacuum Magazine
• /
• v.3 no.1
• /
• pp.22-31
• /
• 2016

Although graphene has been considered as one of the promise materials for future logic devices due to extremely high mobility, its applications in electronics have been limited to a few cases such as a flexible interconnect, and RF devices. Furthermore, most of the studies on graphene devices reported unstable operations, claimed to be due to the poor quality of graphene. Nevertheless, recent studies showed that the electrical performance of graphene field effect transistor could be stabilized even with CVD graphene when well-established integration processes to control the interface of graphene were used. These results indicate that as in the case of silicon devices, a proper control of graphene interface is very important for the stable operation of graphene device as well as other 2D material based devices.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.33-35
• /
• 2012

최근 와이파이, 블루투스 등 근거리 무선 통신 기술의 발달로 홈네트워크, U-City, 홈오토메이션 등의 실생활 적용이 가능해졌다. 이미 삼성, LG 등의 기업에서는 관련 제품을 양산 및 판매하고 있으며 그 기술의 관련연구 또한 활발하게 진행되고 있다. 하지만 이러한 기존 제품 및 시스템들은 가격이 높고 인터넷을 기반으로 운용되기 때문에 AP (Access Point)가 반드시 존재하여야 하며 가정 내의 모든 전자기기들을 연동시키기 위해 구현이 복잡하다는 문제점을 갖는다. 본 논문에서는 이를 해결하기 위해 기존 와이파이 다이렉트 및 블루투스의 D2D (Device-to-Device) 기술을 적용하여 AP의 필요성을 없애고 불필요한 연동을 제외하며 간단한 구현을 요구하는 저가의 제품을 개발하고자 한다. 실험적인 구현을 위해 모터 및 카메라 제어, 타이머, 통신 등이 가능한 AVR ATmega169 마이크로 컨트롤러와 스마트폰을 사용하여 원격 디지털도어락 관리 시스템을 제안한다.