• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.29-32
• /
• 2004

Fully depleted Silicon-on-Insulator (FD-SOI) devices lead to better electrical characteristics than bulk CMOS devices. However, the presence of a thin top silicon layer and a buried SiO2 layer causes self-heating due to the low thermal conductivity of the buried oxide. The electrical characteristics of FDSOI devices strongly depend on the path of heat dissipation. In this paper, we present a new three-dimensional (3-D) analysis technique for the self-heating effect of the finger-type and bar-type transistors. The 3-D analysis results show that the drain current of the finger-type transistor is 14.7% smaller than that of the bar-type transistor due to the 3-D self-heating effect. We have learned that the rate of current degradation increases significantly when the width of a transistor is smaller that a critical value in a finger-type layout. The current degradation fro the 3-D structures of the finger-type and bar-type transistors is investigated and the design issues are also discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.83-90
• /
• 2010

In this paper, we use VR technologies including touch processing technologies and haptic devices to offer touch of fish objects to users. The Omni, a kind of haptic device and made by Sensable Inc., is used to implement multi touch model in VR space. In addition, Matlab/Simulink and proSENSE Virtual Touch Toolbox of Handshake Inc., are used as programing tools. Functions needed to describe the movement of x, y, and z axis respectively are applied to delineate the natural movement of fish objects modeled with 3D. Such movements offer realistic physical interactions to two users controlling multi point respectively. In experiment, to perceive the appearance of 3D object by touch and to feel the respiration by touch are well conducted. We also verify that it is possible to develop games or contents through multi participation in VR Space by using multi point.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.57-60
• /
• 1998

Lean zirconate titanate (PZT) is an attractive material for the memory device applications. We have investigated Pt and{{{{ { RuO}_{2 } }}}} as a botton electrode for a device application of PZT thin film. The bottom electrodes were prepared by using an RF magnetron sputtering method. The substrate temperature influenced the resistivity of Pt and {{{{ { RuO}_{2 } }}}} a s well as the film crystal structure. XRD examination shows that a preferred(111) orientations for the substrate temperature of 30$0^{\circ}C$. From the XRD and AFM results, we recommend the substrate temperature of 30$0^{\circ}C$ for the bottom electrode growth. We investigated and anneal temperature effect because Perovskite PZT structure is recommended for the memory device applications and the structural transformation is occurred only after and elevated heat treatment. As post anneal temperature was increased from RT to $700^{\circ}C$, the resistivity of Rt and {{{{ { RuO}_{2 } }}}} w as decreased. Surface morphology was observed by AFM as a function of post anneal temperature.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.331-335
• /
• 2018

A pillow was fabricated through CAE(Computer Aided Engineering) and 3D printing, which can adjust automatically the height of the pillow when lying sideways and backwards according to the sleeping posture. The target height difference of the pillow was about 1.0 cm ~ 1.5 cm when the head weight difference was about 1.2 kg. Instead of using a complex mechanical device, it was based on an arch structure made of TPU. From the simulation, the optimum model was designed through series combination and the results were compared with the experimental ones. The final product had a height difference of about 2 cm according to the lying posture.

• Journal of Power System Engineering
• /
• v.8 no.4
• /
• pp.17-23
• /
• 2004

A delivery ship is used to handle the cargo with the crane to/from the ships. The ship is inclined in the direction of a cargo which is hung on a crane. In this case, a arc shaped rail should be in the equilibrium state to get good anti rolling performance. In this study, a device and control algorithm are developed to take accurate and quick equilibrium of the rail. The device is composed of a hinged immovable support and two screw jacks. And the control algorithm demands two controllers. One controller is designed such that the screw jack 1 and 2 follow the position reference signal generated by a tilt sensor. The other controller of two degree of freedom is designed to remove the synchronous error occurred between jack 1 and jack 2. The simulation results show that the desirable control performance is achieved.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1281-1282
• /
• 2008

Low cost TCO(Transparent Conductive oxide) thin films were prepared by 3" DC/RF magnetron sputtering systems. For the AZO preparation processes a 99.99% AZO target (Zn: 98 wt.%, $Al_2O_3$: 2 wt.%) was used. In order to verify feasibility of the AZO thin films to organic light emitting device (OLED) application, test organic light emitting device was fabricated based on AZO as TCO, TPD as hole transporting layer (HTL), Alq3 as both emitting layer (EML) and electron transporting layer (ETL), and aluminium as cathode, where the both ITO and AZO surfaces were treated using $O_2$ RF plasma. The I-V characteristics of the AZO/TPD/Alq3/Al OLEDs were evaluated. As the results, the performance of the OLEDs with AZO as transparent conducting anode could be useable.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.702-712
• /
• 2016

A wrist watch type wearable cardiovascular monitoring device is proposed for continuous and convenient monitoring of the patient's cardiovascular system. For comprehensive monitoring of the patient's cardiovascular system, the concurrent electrocardiogram (ECG) and arterial pulse wave (APW) sensor front-end are fabricated in $0.18{\mu}m$ CMOS technology. The ECG sensor frontend achieves 84.6-dB CMRR and $2.3-{\mu}Vrms$-input referred noise with $30-{\mu}W$ power consumption. The APW sensor front-end achieves $3.2-V/{\Omega}$ sensitivity with accurate bio-impedance measurement lesser than 1% error, consuming only $984-{\mu}W$. The ECG and APW sensor front-end is combined with power management unit, micro controller unit (MCU), display and Bluetooth transceiver so that concurrently measured ECG and APW can be transmitted into smartphone, showing patient's cardiovascular state in real time. In order to verify operation of the cardiovascular monitoring system, cardiovascular indicator is extracted from the healthy volunteer. As a result, 5.74 m/second-pulse wave velocity (PWV), 79.1 beats/minute-heart rate (HR) and positive slope of b-d peak-accelerated arterial pulse wave (AAPW) are achieved, showing the volunteer's healthy cardiovascular state.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.218-222
• /
• 2017

In this paper, in order to develop excellent composition ceramics for a piezoelectric energy- harvesting device, we synthesized $0.99(Na_{0.52}\;K_{0.443}\;Li_{0.037})(Nb_{0.883}\;Sb_{0.08}\;Ta_{0.037})O_3$ + $0.01(Sr_{0.95}Ca_{0.05})TiO_3$ + $0.3\;wt%\;Bi_2O_3\;+\;0.3\;wt%\;Fe_2O_3\;+\;0.3\;wt%\;CuO$ (abbreviated as NKN-SCT) ceramics with different sintering times, using the ordinary solid-state reaction method. The effect of sintering time on the microstructure and piezoelectric properties was investigated. The ceramics with the sintering time of 7 h have the optimum values of the piezoelectric constant ($d_{33}$), piezoelectric voltage constant ($g_{33}$), planar piezoelectric coupling coefficient (kp), mechanical quality factor (Qm), and dielectric constant (${\varepsilon}r$): $d_{33}=314[pC/N]$, $g_{33}=20.07[10^{-3}mV/N]$, kp = 0.442, Qm = 93, ${\varepsilon}r=1,768$, all being suitable for a piezoelectric energy-harvesting device.

• Nano
• /
• v.13 no.11
• /
• pp.1850136.1-1850136.12
• /
• 2018

Three-dimensional (3D) mixed phases NiSe nanoparticles growing on the nickel foam were synthesized via a simple one-step hydrothermal method. A series of experiments were carried out to control the morphology by adjusting the amount of selenium in the synthetic reaction. Meanwhile, the as-prepared novel column-acicular structure NiSe exist three advantages including ideal electrical conductivity, high specific capacity and high cycling stability. It delivered a high capacitance of $10.8F\;cm^{-2}$ at a current density- of $5mA\;cm^{-2}$. An electrochemical capacitor device operating at 1.6 V was then constructed using NiSe/NF and activated carbon (AC) as positive and negative electrodes. Moreover, the device showed high energy density of $31W\;h\;kg^{-1}$ at a power density of $0.81kW\;kg^{-1}$, as well as good cycling stability (77% retention after 1500 cycles).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.820-828
• /
• 2017

Service of digital hologram that has been recognized as a visual system for next generation requires various signal processing technologies. A transform is the most frequently used tool among signal processing techniques for 2-dimensional(D) and 3-D natural picture. A digital hologram has totally different property with a natural picture, so it is rarely efficient to apply transform tools used in 2-D image processing to a digital hologram. To overcome this a Fresnelet transform for a digital hologram has been proposed. We derive a Fresnelet transform by using the Daubechie's filter after applying an unitary Fresnel transform to a wavelet basis function. We also implement the transform as types of device and kernel code to improve operational performance. In consideration of the average time that is required for a pixel we can have observed the performance is improved up to 242 and 30 times for using the (9,7) and (5,3) filters in case of using device code.