• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.17-26
• /
• 2010

This is concerned with the technology to monitor the vehicle operation, failure and disorder by using WiBro portable device. More precisely, the technology makes it possible that the information collection device is connected to both ECU(Electronic Control Unit) which is the device for controlling engine, transmission, brake, air-bag, etc that are connected to in-vehicle network and OBD-II connector that is for data collection from various sensors. In addition, with a WiBro portable device (cell phone, PDA, PMP, UMPC, etc). equipped with a vehicle diagnostic programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and alarm is alerted when the vehicle is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiBro network to the server managed by the company specialized in managing the vehicles, thus the technology could help the drivers who have less knowledge about their auto-vehicles have safe and economic driving. There is always a possibility of malfunction due to various types of noise that are caused by wring-harness when the device is wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from vehicle and a personal WiBro device. Also, we performed research on data acquisition and interlock for the system defined by the definition for information and data sharing platform.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.2
• /
• pp.127-131
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other home network via Internet through IGD DCP with control commands of UPnP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.15-23
• /
• 2008

This paper proposes a CIB framework implementing a ubiquitous smart space. In a ubiquitous smart space, a ubiquitous mobile device recognizes surrounding context, and infers the situation and provides services to users. Ubiquitous mobile devices have a RDF store to manage resources and relevant information efficiently on CIB framework. This store space is flexible on the operations such as addition, modification, deletion of information and response to query by SPARQL. In addition, it provides local information to other ubiquitous mobile devices in the from of XML and stores resource information from other ubiquitous mobile devices into local ubiquitous mobile device for the purpose of discovering external resources.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.1236-1251
• /
• 2013

Sharing geo-tagged photos has been a hot social activity in the daily life because these photos not only contain geo information but also indicate people's hobbies, intention and mobility patterns. However, the present raw geo-tagged photo routes cannot provide information as enough as complete GPS trajectories due to the defects hidden in them. This paper mainly aims at analyzing the large amounts of geo-tagged photos and proposing a novel travel route restoring method. In our approach we first propose an Interest Measure Ratio to rank the hot spots based on density-based spatial clustering arithmetic. Then we apply the Hidden Semi-Markov model and Mean Value method to demonstrate migration discipline in the hot spots and restore the significant region sequence into complete GPS trajectory. At the end of the paper, a novel experiment method is designed to demonstrate that the approach is feasible in restoring route, and there is a good performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.1057-1073
• /
• 2015

In this paper, we consider cooperative D2D communications in cellular networks. More precisely, a cellular user leases part of its spectrum to facilitate the D2D communication with a goal of improving the energy efficiency of a D2D pair. However the D2D pair is untrusted to the cellular user, such resource sharing may result in the information of this cellular user unsecured. In order to motivate the cellular user's generosity, this D2D pair needs to help the cellular user maintain a target secrecy rate. To address this issue, we formulate a joint spectrum and power allocation problem to maximize the energy efficiency of the D2D communication while guaranteeing the physical layer security of the cellular user. Then, a theorem is proved to indicate the best resource allocation strategy, and accordingly, an algorithm is proposed to find the best solution to this resource allocation problem. Numerical results are finally presented to verify the validity and effectiveness of the proposed algorithm.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.341-348
• /
• 2007

Even though the secret information stored in home device in home network must be handled very safely and carefully, we have no measure for protecting the secret information without additional hardware support. Since already many home devices without consideration of the security have been used, the security protection method for those devices have to be required. In this paper, we suggest two schemes that protect the security information using networking function without additional hardware support, and those hybrid method to supplement the defects of each scheme. We also consider the our proposals in the aspects of security and cost.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.155-160
• /
• 2011

IPTV functions not only as media player that does play the broadcasting industry's contents, also as the gateway is guaranteed of QoS(Quality of Service). This is for free contents-sharing that device stores contents using home network circumstance, and is for watching with seamless network service. Also this have required next QoS model that can handle stably as it may contain more data of the small computing device in next generation home system. We need ubiquitous-oriented QoS's design and development project that focuses on internal and external media service, not the existing QoS nor one-sided QoS of media sevice industry. This paper focuses on network module development. This supports IPTV in media industry and two-way capability of QoS highlighting multimedia service in network industry. In additional, this can handle stably the multiplex signal of USN/RFID as the representative ubiquitous and home network that services high-speed wire and wireless interface, and support the seamless u-QoS.

• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.567-572
• /
• 2016

N-screen is an emerging technology to support multimedia multicasting, content sharing and content mobility. N-screen service providers should obtain the technology that provides the highest quality content seamlessly. Distributed nature of WiMedia distributed-MAC protocol can provide full mobility support, and achieves seamless medium access method in contrast to IEEE 802.15.3. So, in this paper, WiMedia distributed-MAC protocol is adopted and an asynchronous multicast transmission (AMT) technology is proposed to enhance performance of seamless N-screen wireless service based on distributed-MAC. The ACK frame transmissions are not required for multicast transmissions. By using this property in AMT, if a device is a multicast receiver, its reserved time slots can be reserved by the other devices with 1-hop distance. Furthermore, each N-screen device broadcasts and shares the information including an order in asynchronous traffic reservations to reduce conflicts in determining the transmission order of asynchronous N-screen packets. Therefore, AMT scheme expands the number of time slots available and throughputs for multicast and asynchronous traffic reservations when comparing with the distributed-MAC standard system. N-screen communications based on distributed-MAC with the proposed AMT shows a new framework for realizing N-screen wireless service with the full content mobility.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.22-29
• /
• 1999

In the development of high speed marine vehicle, lilting devices became important in sharing the pay load or controlling the attitude. The devices are also important to meet the IMO regulation to prevent the marine pollution by keeping the high rudder force for VLCC even in low speed operation. The high lift devices such as the Coanda device have been introduced to the aircraft as a common practice for a long time among the aero-engineers. If the Coanda device can be utilized to the flapped rudder, the severe requirement of rudder force could be provided for the VLCC in low speed operation. The performance of the rudder system has been investigated at the towing tank of Seoul National University.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.29-35
• /
• 1998

In this paper, the proposed audio/video control device for multiple user in the multimedia platform is changed for the better a disadvantage that must get one computer per participant to process a floor mode needed for interactive collaboration in the multimedia based distance education. It also proposed simulator of co-work environment that included multimedia data. This developed to proceed a multimedia distance education efficiently and sharing a computer among multiple users. Therefore, this is resulting in a reduction the cost needed to build a multimedia distance education system as well as totally simplified the organization of system. It also offers compatibility and generality, interfacing with the printer port of standard PC supporting the bi-direction mode.