• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.3
• /
• pp.60-71
• /
• 2017

Smart devices such as smart phones, smart TVs, and smart pads have become essential devices in recent years. As the popularity and demand grows, the performance of smart devices is also getting better and users are dealing with a lot of things such as education and business using smart devices instead of desktop. However, smart devices that still have poor performance compared to desktop, even with improved performance, have difficulty running high performance applications due to limited resources. In this paper, we propose a load balancing algorithm applying the characteristics of smart devices to overcome the resource limitations of devices. in order to verify the algorithm, we implemented the algorithm after adding the distributed processing system service in Android platform. After constructing the cluster on the smart device, various experiments were conducted. Through the analysis of the test results, it is confirmed that the proposed algorithm efficiently improves the overall distributed processing performance by effectively aggregating different amounts of computing resources in heterogeneous smart devices.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.386-393
• /
• 2023

Recently, the demand for autonomous navigation technology has increased, and related research is also increasing. Autonomous ships generally follow the planned route, calculate the avoidance route according to the risk situation while sailing, and follow a calculated route. In general, an automatic steering device is used to follow the route, and among the operational automatic steering device methods, the route control mode is the most appropriate method to apply to autonomous ships. Therefore, in this study, we developed a route-tracking algorithm to apply an avoidance route using the navigation control mode of an automatic steering device. The algorithm was developed by dividing the straight and turning sections. A performance test was conducted to satisfy the performance suggested by IEC 62065, the relevant international standard, using simulator equipment that had acquired international certification to verify its performance. The results of the performance verification confirmed that the cross-track error, which represents the straight distance between the ship and the route, satisfied the performance standards suggested by IEC 62065 when the ship followed the route.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.325-333
• /
• 2007

An OS requires the device driver to control hardware IPs at application level. Development of a device driver requires specific acknowledge for target hardware and OS. In this paper, we present a system which generates a device driver together with an interface circuit. In the proposed system, an efficient device driver is generated by selecting a basic device driver skeleton, a function module code, and a header file table from the pre-constructed library and an interface circuit is constructed such that the generated device driver operates correctly. The proposed system is evaluated by generating a TFT-LCD device driver on the ARM922T core with 3.5 inch Samsung TFT-LCD in ARM-Linux environment. Experiment result shows that the writing time on the LCD is decreased by 1.12% and the compiled code size is increased by 0.17% compared to the manually generated one. The automatically generated device driver has no performance degradation in the latency of hardware control at the application program level. The system development time can be reduced using the proposed device driver generation system.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.291-298
• /
• 2017

In recent years, the increase of secondary controls within vehicles requires a mechanism to integrate various controls into a single device. This paper presents control performance of an integrated magnetorheological (MR) haptic device which can adjust various in-vehicle comfort instruments. As a first step, the MR fluid-based haptic device capable of both rotary and push motions within a single device is devised as an integrated multi-functional instrument control device. Under consideration of the torque and force model of the proposed device, a magnetic circuit is designed. The proposed MR haptic device is then manufactured and its field-dependent torque and force are experimentally evaluated. Furthermore, an inverse model compensator is synthesized under basis of the Bingham model of the MR fluid and torque/force model of the device. Subsequently, haptic force-feedback maps considering in-vehicle comfort functions are constructed and interacts with the compensator to achieve a desired force-feedback. Control performances such as reflection force are experimentally evaluated for two specific comfort functions.

• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.503-515
• /
• 2022

Purpose: As ISO 13485 was revised in 2016, the domestic GMP (Good Manufacturing Practice) system was also revised and implemented in 2019. However, there are many problems in the domestic medical device industry because most of the small and medium-sized enterprises lack human and material resources. Accordingly, this study was conducted to provide education programs for domestic medical device companies to induce information provision and improve the company's quality management ability. Methods: First, analyze existing education. Second, based on the revised GMP system, a survey paper was produced to investigate difficulties and problems experienced by companies. Third, a two-week survey was conducted on domestic medical device manufacturers, and a total of 77 companies responded to this survey. Fourth, educational program development was conducted based on the results of the survey. Results and Conclusion: The developed education program consists of a total of five sessions. In this study, the educational program developed by grasping the needs of the company through a survey consists of a total of five sessions. The first session consisted of theoretical education and the second to fifth sessions of practical education. Through the education program developed in this study, it is expected to contribute to the overall development of medical device quality by establishing a domestic medical device manufacturing environment that secures the safety and performance of domestic medical device companies.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.287-291
• /
• 2018

The CNTFET, which is attracting attention as a next-generation semiconductor device, can obtain ballistic or near-ballistic transport at a lower voltage than that of conventional MOSFETs by depositing CNTs between the source and drain of the device. In order to increase the performance of the CNTFET, a large number of CNTs must be deposited at a high density in the CNTFET. Thus, various manufacturing processes to increase the density of the CNTs have been developed. Recently, the Directional Shrinking Transfer Method was developed and showed that the current density of the CNTFET device could be increased up to 150 uA/um. So, this method enhances the possibility of implementing a CNTFET-based integrated circuit. In this paper, we will discuss how to evaluate the performance of the CNTFET device compared to a MOSFET at the circuit level when the CNTFET is fabricated by the Directional Shrinkage Transfer Method.

• Explosives and Blasting
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2018

In this study, several underwater steel cutting tests and AUTODYN numerical analyses were conducted to evaluate the penetration performance of a shaped charge device. Parameter analyses for the contribution rate were conducted by using the robust design method. The parameters adopted in this study were chamber type, stand-off, and wire setting, each of which had three levels in the analysis. Analysis results showed that the contribution rate was most affected by the stand-off, followed by the chamber type and wire setting. Experiments of underwater steel cutting were conducted at water depth of 25m. As expected, the experiments and numerical simulation showed similar results for underwater steel cutting performance, and thus the feasibility of the shaped charge device for underwater steel cutting at deep water depth was verified.

• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.1-9
• /
• 2016

For underwater steel structure, cut that underwater shaped charge device that combines a spring hose, which is an external device of pressure resistance and flexibility with flexible shaped charge, was invented. As a basic experiment for an optimum condition design, an penetration performance was compared by external device shape. To evaluate the result of an experiment, image analysis was carried out after obtaining the model by using the liquid rubber for the penetrated steel plate. To simulate the penetrating process of shaped charge, the AUTODYN program has been used. As a result of analysis, while the average penetration depth of circular and square shaped external devices were similar, the penetration quality was more uniform in the case of circle. In addition, water infiltration occurred in square case, displacement and strain rate according to the increase of the water pressure were measured high.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.6-11
• /
• 2015

The ESD(electrostatic discharge) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different GPNS(Gate to Primary $N^+$ Diffusion Space) structure was discussed for high voltage I/O applications. A conventional NSCR_PPS standard device with FPW(Full P-Well) structure and non-CPS(Counter Pocket Source) implant shows typical SCR-like characteristics with low on-resistance(Ron), low snapback holding voltage(Vh) and low thermal breakdown voltage(Vtb), which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified PPW(Partial P-Well) structure and optimal CPS implant demonstrate the improved ESD protection performance as a function of GPNS variation. GPNS was a important parameter, which is satisfied design window of ESD protection device.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.10
• /
• pp.407-414
• /
• 2017

Pig monitoring applications consisting of many tasks can take advantage of inherent data parallelism and enable parallel processing using performance accelerators. In this paper, we propose a task distribution method for pig monitoring applications into a heterogenous computing platform consisting of a multicore-CPU and a manycore-GPU. That is, a parallel program written in OpenCL is developed, and then the most suitable processor is determined based on the measured execution time of each task. The proposed method is simple but very effective, and can be applied to parallelize other applications consisting of many tasks on a heterogeneous computing platform consisting of a CPU and a GPU. Experimental results show that the performance of the proposed task distribution method on three different heterogeneous computing platforms can improve the performance of the typical GPU-only method where every tasks are executed on a deviceGPU by a factor of 1.5, 8.7 and 2.7, respectively.