• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.84-92
• /
• 2013

Blinds are a common type of shading device and are increasingly operated automatically to overcome the limitations of manual operation. Automated blinds need to be controlled to maximize benefits of daylight in the point of occupant comfort and energy consumption. However, the previous control methods could cause occupant's distractions by the undesirable control time interval and amount of blind movement. A few researches suggested the control concept for minimizing occupant's distractions by automatic blind control, but they did not provide optimal control algorithm to be useful in practice. In this paper, we propose an optimal control algorithm for automated blinds that can maximize not only visual comfort but also sunlight penetration into buildings based on occupants' preferences on blind movement and sunlight. The proposed control algorithm can prevent solar glare on workplane and minimize occupant's distractions to maximize occupants' visual comfort.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.251-256
• /
• 2007

The aim of this paper is development of resistivity seismic dilatometer (RSDMT) system. The resistivity module for obtaining apparent resistivity depth plot and seismic module for obtaining shear wave velocity (Vs) depth plot are attached to the conventional flat dilatometer testing equipment. From shear wave velocity profile, the stiffness at low strains of a site can be evaluated in undisturbed condition. And the resistivity value contains some information about water content and mineral characteristics of clayey soil. Specially manufactured resistivity and seismic modules were connected between commercialized DMT blade and drilling rod. To enhance reliability and repeatability of RSDMT test, automatic testing system including notebook based data acquisition system and automatic surface source system were developed. RSDMT system can be performed rapidly and can obtaine more reliable data at the same point compared with the separated testing system. The verification studies for the developed RSDMT system are going to be performed. From these studies, the effectiveness of integrated hybrid testing system will be checked in light of proper evaluation of geotechnical design parameters of clayey soils.

• 설비공학논문집
• /
• 제19권12호
• /
• pp.811-820
• /
• 2007

A Study on the optimal design of the AIG(Ammonia Injection Grid) to improve the performance of DeNOx facilities in the HRSG(Heat Recovery Steam Generator) was performed using the CFD analysis. On the basis of the flow analysis results in the case that the AIG in the HRSG was not installed, the numerical analyses according to the positions of AIG, injection angles of nozzle and the control of ammonia injection quantity were carried out. The standard deviation according to factors was calculated for quantitative comparison. As the results, the AIG in the HRSG should be installed in the position that the uniform flow field shows through the exact flow analysis in the previous of the AIG design and installation. In the case the AIG has already been installed and non uniform flow distribution shows, it is recommended that flow correction device or KoNOx catalyst should be used. Otherwise, the control of ammonia injection angle or the ammonia injection quantity using the velocity profile analysis is demanded to accomplish the optimal performance.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.433-440
• /
• 2013

We present an experimental and numerical study of spectral profiles of effective group indices of hydrogenated amorphous silicon (a-Si:H) waveguides and of their chromatic-dispersion effect on the four-wave-mixing (FWM) signal generation. The a-Si:H waveguides of 220-nm thickness and three different widths of 400, 450 and 500 nm were fabricated by using the conventional CMOS device processes on a $2-{\mu}m$ thick $SiO_2$ bottom layer deposited on 8-inch Si wafers. Mach-Zehnder interferometers (MZIs) were formed with the a-Si:H waveguides, and used for precise measurement of the effective group indices and thus for determination of the spectral profile of the waveguides' chromatic dispersion. The wavelength ranges for the FWM-signal generation were about 45, 75 and 55 nm for the 400-, 450- and 500-nm-wide waveguides, respectively, at the pump wavelength of 1532 nm. A widest wavelength range for the efficient FWM process was observed with the 450-nm-wide waveguide having a zero-dispersion near the pump wavelength.

• 대한전자공학회논문지SD
• /
• 제40권11호
• /
• pp.1-8
• /
• 2003

본 논문에서는 소스/드레인 및 게이트의 불순물에 따른 실리사이드의 의존성을 면저항과 단면 특성 등의 분석을 통하여 연구하였다. 급속 열처리 후에는 As, P, BF₂, B/sub 11/ 등과 같은 불순물에 대한 먼저항의 차이가 거의 나지 않았다. 하지만 실리사이드 형성 후히 고온 열처리시에 그 특성이 매우 크게 변화하였다. BF₂를 주입한 시편에서의 특성이 가장 좋게 나타난 반면, As를 주입한 실리사이드의 특성이 가장 열화되었다. BF₂를 주입한 시편에서의 실리사이드 특성 향상은 flourine에 의한 니켈의 확산 방지 때문인 것으로 여겨진다. 그러므로 실리사이드의 성능 향상을 위해 Ni의 확산을 방지시키는 것이 매우 필요하다.

• 한국정보통신학회논문지
• /
• 제17권8호
• /
• pp.1940-1946
• /
• 2013

스마트 헬스케어 서비스(smart healthcare service)는 예방적 건강관리와 웰니스(wellness)를 위한 수요자 중심의 능동적 서비스 제공을 목표로 한다. 최근, 스마트 헬스케어는 스마트폰을 사용하여 기초체력 운동 지수, 섭취 칼로리, 심박 체크 등의 다양한 서비스를 제공할 수 있다. 그러나 미비한 개인건강기기 표준화로 아직까지 상용 가능한 서비스 모델이 없는 실정이다. 이에 본 논문에서는 산소포화도 측정계를 사용하여 Bluetooth HDP를 기반으로 ISO/IEEE 11073 표준을 지원하는 안드로이드 스마트 헬스케어 Manager를 설계, 구현하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.213-216
• /
• 2003

Recently a new high power device GCT (Gate Commutated Turn-off) thyristor has been successfully introduced to high power converting application areas. GCT thyristor has a quite different turn-off mechanism to the GTO thyristor. All main current during turn-off operation is commutated to the gate. Therefore, IGCT thyristor has many superior characteristics compared with GTO thyristor; especially, snubberless tum-off capacibility and higher turn-on capacibility. The basic structure of the GeT thyristor is same as that of the GTO thyristor. This makes the blocking voltage higher and controllable on-state current higher. The turn-off characteristic of the GCT thyristor is influenced by the minority carrier lifetime and the performance of the gate drive unit. In this paper, we present turn-off characteristics of the 2.5kV PT(Punch-Through) type GCT as a function of the minority carrier lifetime and variation of the doping profile shape of p-base region.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.55-60
• /
• 2005

This paper has been focused in developing of plastic lens with ultra-precision and low birefringence ability using by injection molding simulation tools. The simulation tools, $3D-Timon^{TM}\;and\;Asu-Mold^{TM}$ were applied to visualize indirectly the flow pattern of melted polymer enter the mould and the simulation results are verified as compared with the experimental results. Birefringence and polarized light generated in injection molding process was also calculated for each injection conditions and compared with .the pictures of experimented optical lens go through the polarized light plates device. A spherical radius of plastic optical lens transcribed from profile of mould core surface was measured to estimate the geometrical accuracy fer the each injection conditions. It is confirmed that the simulation results about flow pattern and polarized light area coincided in experimental results. It is known that increasing in thickness shrinkage at center of lens, the spherical radius is larger from comparing the graph measured spherical radius and the thickness shrinkage at center of lens

• 한국정보통신학회논문지
• /
• 제11권9호
• /
• pp.1702-1708
• /
• 2007

Dragon 스트림 암호 알고리즘은 현재 ECRYPT 프로젝트의 일부인 eSTREAM에 참여하여 소프트웨어 분야(Profile 1)의 Phase 1, 2단계를 통과하여 Phase 3단계에 등록된 상태이다. Dragon은 기존의 스트림 암호와 달리 한 개의 워드(32비트)단위의 NLFSR(non-linear feedback shift register)을 사용하고, 128/256 비트의 key와 IV(Initialization Vector)를 입력받아 64비트의 키 수열을 생성하는 키 수열 발생기(Keystream Generator)이다. 본 논문에서는 Dragon 스트림 암호 알고리즘을 Altera사의 Quartus II툴을 이용하여 Cyclone III FPGA 소자(EP2C35F672I8)에 구현 및 타이밍 시뮬레이션을 하였고, 그 결과 111MHz에서 7.1Gbps의 처리량을 보였다.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.569-577
• /
• 2009

As the scale factor of model propellers utilized in cavitation test is about 40, it is difficult to find out practical countermeasures against the small area erosions on the blade tip region throughout model erosion tests. In this study, a partial propeller blade model was used for the observation of cavitation pattern for the eroded propeller. A partial propeller blade model was manufactured from 0.7R to tip with expanded profile and with adjustable device of angle of attack. Reynold's number of a partial propeller blade model is 7 times larger than that of a model propeller. Also, anti-singing edge and application of countermeasures to partial propeller blade model which produced in large scale can be more practical than a model propeller. For the observation of cavitation at high Reynold's number, high speed cavitation tunnel was used. To find out the most severe erosive blade position during a revolution, cavitation observation tests were carried out at 5 blade angle positions.