• 한국응급구조학회지
• /
• 제22권1호
• /
• pp.49-59
• /
• 2018

Purpose: The purpose of this study was to develop an assistant device for the promotion of bag-valve-mask ventilation based on a non-equivalent control group pre-test and post-test design. Methods: The experimental tool was a mask assistance device developed by the researchers. Data were analyzed using SPSS 21.0 with the cardiopulmonary resuscitation (CPR) evaluation program from August 18 to 30, 2016. The research tools included general, hand-related, and ventilation-related characteristics. Results: Before and after using the mask assistance device, the tidal volume increased by 64 mL (p<.001) from 461.76 mL to 525.86 mL. The tidal volume for control was 477.86 mL, and there was a statistical difference (p<.05). The ventilation frequency in device users was 10 times per minute for a total of 20 ventilations with before 10.65 after 10 times, and that of the control group was before 10.36 times after 10 times; there was no difference in both groups(p>.05). The accuracy of the assistance device was $81.72{\pm}30.86%$, which was a very high value. However, the accuracy of ventilation in the control group with no assistance device was $18.97{\pm}32.44%$, which was a very low accuracy rate. Conclusion: This study's results suggested utilizing the newly-developed mask assistance device in CPR, and showed increases in tidal volume and accuracy of ventilation using the bag-valve-mask ventilation equipment. The general and hand-related characteristics did not have any effect, so the use of the device proved to increase the efficacy in all users.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.498-508
• /
• 2008

경부고속열차 차상컴퓨터 장치의 하부장치로 운전자에게 차량의 정보와 고장의 현시 그리고 유지보수기능 및 훈련기능을 가지고 있는 장치가 TECA (Terminal Cabin)이다. KTX 차량의 운전은 고속화 운전을 위해 신호운전의 필요가 요구되어지며 차량의 장대화 및 일인운전을 통한 차량의 기본정보 취득 및 고장에 대한 조치에 있어 많은 어려움이 있는 것이 사실이다. 이에 대해 차량에서 발생하는 수많은 정보에 대한 신속하고 정확한 처리와 유지보수를 위해 TECA장치는 그 활용에 있어 반드시 필요한 장치이다. 그러나 본 장치에 대한 하드웨어와 유지보수 그리고 새로운 요구에 따른 장치개발에는 연구사례가 없는 실정이다. 이에 운전자지원단말기 장치의 유지보수능력 개발과 장치에 대한 이해를 돕고 장치개발에 필요한 TECA의 기초기능과 요구사항을 하드웨어 중심으로 연구하였으며 이로 인한 새로운 운전자 단말기 장치 개발에 필요한 사양정립에 활용하도록 활용할 수 있으리라 본다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.317-319
• /
• 2009

신체불수 장애인들은 다양한 종류의 보조 장치를 사용하고 있고 독서 보조 장치도 여러 종류 연구되고 개발되어 있다. 하지만 현재 개발되어 시판되고 있는 신체적 장애인을 위한 독서 보조 장치는 기능이 단순히 책장을 넘겨주는데 국한되어 있다. 본 논문에서는 신체적 장애인의 독서를 보조할 수 있는 장치의 프로토타입 모델을 Lego Mindstorm NXT를 이용하여 구현한 하드웨어의 책장 넘김 성공률 향상을 위해 설계를 수정하고 PDA와 같은 모바일 기기를 연동하여 보다 편리하고 유용한 기능 및 서비스를 구현한다. 그리고 장애인만을 위한 독서 보조 장치가 아니라 일반인들도 유용하게 사용할 수 있는 유니버셜 디자인 관점의 도구가 될 수 있는지 모색해본다.

• 보건의료산업학회지
• /
• 제11권3호
• /
• pp.129-144
• /
• 2017

Objectives : To review a Tanzanian medical engineering education program and determine improvement measures for the Official Development Assistance (ODA) healthcare projects. Methods : A consultation of the Tanzanian medical engineering education program funded by the National Research Foundation of Korea (NRFK) was reviewed. An on site survey, an environmental analysis, and in-depth interviews were performed. Results : Survey results highlighted a lack of medical device education and the low operating rate of medical equipment. The need to establish educational program was thus confirmed. The expansion of healthcare facilities appeared to be limited within the current medical management system. A master coursework plan for Tanzania medical engineering was developed. Conclusions : The needs of medical engineering education were recognized. A plan and curriculum were developed. The medical engineering education program should be planned and budgeted prior to the ODA healthcare program.

• 패션비즈니스
• /
• 제18권4호
• /
• pp.1-14
• /
• 2014

Currently smart textile market is rapidly expanding and the demand is increasing integration of an electronic fiber circuit. The garments are an attractive platform for wearable device. This is one of the integration techniques, which consists of is the selective introduction of conductive yarns into the fabric through knitting, weaving or embroidering. The aim of this work is to develop a golf bend driven prototype design for an attachable Arduino that can be used to assess elbow motion. The process begins with the development of a wearable device technique that uses conductive yarn and flex sensor for measurement of elbow bending movements. Also this paper describes and discusses resistance value of zigzag embroidery of the conductive yarns on the tensile properties of the fabrics. Furthermore, by forming a circuit using an Arduino and flex sensor the prototype was created with an assistance band for golf posture training. This study provides valuable information to those interested in the future directions of the smart fashion industry.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.371-376
• /
• 2022

The purpose of this study is to develop a walking assistance system with mobility support and life support functions so that the elderly with reduced physical ability and patients who are uncomfortable when moving can move comfortably indoors and outdoors, and help social life. An obstacle recognition sensor module that can be applied indoors and outdoors is installed on a lightweight walking aid. The purpose of this study is to develop a walking assistance system with mobility support and life support functions so that the elderly with reduced physical ability and patients who are uncomfortable when moving can move comfortably indoors and outdoors, and help social life. An obstacle recognition sensor module that can be applied indoors and outdoors is installed on a lightweight walking aid. It is a system structure of an integrated actuator and brake system that can avoid obstacles in consideration of the safety of the elderly and is easy to install on the device. In this paper, the design of a lightweight walking aid was designed to increase the convenience of the socially disadvantaged and the elderly with reduced exercise ability. In addition, in order to overcome the disadvantage of being inconvenient to use indoors due to the noise and vibration of the motor during operation, an In-Wheel type motor is applied to develop and apply a low noise, low vibration and high efficiency drive system.

• 대한임베디드공학회논문지
• /
• 제8권1호
• /
• pp.61-67
• /
• 2013

Wheelchair users have a difficulty in managing their weight because there is lack of measure systems and even though the users have the system, it costs too much. Thus, purpose of this study is for developing the portable weight scale automatic device to help wheelchair users by monitoring their weight on the wheelchairs in real time. Portable weight scale automatic device composed by four strain gauges, and the device was connected with mobile phone so that wheelchair users were able to check their weight in real time. In order to evaluate the device performance, 10 normal subjects and 10 disabled subjects participated in this study. The subjects' truth weight and measured weight by the device are compared. The weigh difference within normal subjects was $0.75{\pm}0.80kg$, and the weigh difference within disabled subjects was $1.02{\pm}0.74kg$. Difference between the truth weigh and the measured weigh were not statistically different. The reason for this error occurred is inaccuracy of the loadcell installation and calibration. If this problems get solved, the measured indicator is expected to help wheelchair users to manage their weight.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.335-338
• /
• 2005

Starting with the development of environmentally friendly electric controlled engine, sensors have played an increasing role in automotive technology. Electric power steering (EPS) systems are more and more replacing hydraulic systems. To improve fuel economy, the power assistance is provided by an electric drive. In this paper, development of a unique torque sensor for EPS is introduced. A capacitive type torque sensor is concluded to be suitable for EPS because its output is accurate, linear and robust against the variance of temperature, and patents have not applied so much.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.495-497
• /
• 2012

의료기기 소프트웨어 테스트 위험관리 적용 방안에 대해 연구하였다. 먼저 설문조사를 통해 의료기기 제조업체의 소프트웨어 밸리데이션 및 위험관리 현황을 분석하고 두 번째로 블랙박스 테스트와 화이트 박스 테스트를 비교하여 차이점을 분석하였다. 세 번째로 소프트웨어 분석 도구를 활용한 코드 분석 후 잠재적인 위해요인을 도출하고 이를 정량화 하였으며, 마지막으로 도출된 위해요인을 FMEA 기법을 이용하여 의료기기 위험관리 프로세스에 적용할 수 있도록 프레임워크를 구축하였다. 이를 통해 의료기기 품질관리(GMP) 업무 중 소프트웨어 밸리데이션 및 위험관리 프로세스를 구축하기 어려운 제조업체를 위한 업무 지원에 활용하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.165-170
• /
• 2004

The purpose of this work was to assess and quantify the beneficial effects of long-term gas exchange, at varying frequencies, for the development of a vibrating intravascular lung assistance device (VIVLAD), for patients suffering from acute respiratory distress syndrome (ARDS). The experimental design and procedure have been applied to the construction of a new device for assessing the effectiveness of membrane vibrations. An analytical solution has been developed for the hydrodynamics of flow through a bundle of sinusoidally vibrated hollow fibers, with the intention of gaining insight into how wall vibrations might enhance the performance of the VIVLAD. As a result, the maximum oxygen transfer rate was reached at the maximum amplitude and through the transfer of vibrations to the hollow fiber membranes. The device was excited by a frequency band of 7Hz at various water flow rates, as this frequency was the 2nd mode resonance frequency of the flexible beam. 675 hollow fiber membranes were also bundled, within the blood flow, into the device.