• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.31-36
• /
• 1983

Flowering time of Pinus rigida Mill and Pinus taeda L, in an $F_1$-hybrid seed orchard was investigated for five years from 1971 through 1975. The two tree species flowered during late April to early May at the observation site, Flowering patterns of the two species of different sex of the same species changed yearly during the five observation years. Floral development of the two species appeared to depend largely on temperature factor during the period of the initiation of floral organs up to flowering provided that other environmental factors are normal. Six-days difference in flowing time between female inflorescence of pitch (flower later) and male inflorescence of loblolly (flower earlier) pines effectively isolated the two species reproductively on population levels. Not all of selected trees of the two species for their synchronized flowering appeared to be useful as parental trees for the establishment of $F_1$-hybrid seed orchards. With the result from this investigation the author suggested to use a modified simple recurrent selection method for pitch-loblolly hybrid pine breeding.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.175-180
• /
• 2010

In the almost application parts, GNSS being used the primary navigation system on world-widely. However, some of nations attempt or deliberate to enhance current Loran system, as a backup to satellite navigation system because of the vulnerability to the disturbance signal. Loran interests in supplemental navigation system by the development and enhancement, which is called eLoran, and that consists of advancement of receiver and transmitter and of differential Loran in order to increase the accuracy of current Loran-C. A significant factor limiting the ranging accuracy of the eLoran signal is the ASF in the TOAs observed by the receiver. The ASF is mostly due to the fact that the ground-wave signal is likely to propagate over paths of varying conductivity and topography. This paper presents comparison results between the predicted ASF and the measured ASF in a southern east region of Korea. For predicting ASF, the Monteath model is used. Actual ASF is measured from the legacy Loran signal transmitted Pohang station in the GRI 9930 chain. The test results showed the repeatability of the measured ASF and the consistent characteristics between the predicted and the measured ASF values.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.26-35
• /
• 2014

This research aims to identify relationships between stress level of parents in single parent families and life satisfaction in accordance with methods of getting rid of stress. Subject of the research were 260 parents in single parent families, centering on small towns in midsection sphere based on answers to questionnaire executed from March 1, 2013 to July 31, 2013. Collected data were analyzed by executing frequency analysis, factor analysis, t-test, one-way ANOVA, correlation analysis, regression analysis, etc. and an empirical verification was performed at 5% of significance level. From the result of the research, stress level appeared according to factors in a sequence of economic power, physical strength, social relation, family, mentality, etc. and significant influence to life satisfaction was found depending on factors such as stress removing methods and controlling effect. And minor factors were shown in a sequence of finance, emotion and acknowledgement. Suggestive points of the research are thought to be significance of stress removing method to the enhancement of life satisfaction, which will be a good material for the establishment of fundamental supporting plans and development of programs for single parent families.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.567-574
• /
• 2003

Application field of third dimension graphic is becoming diversification by the fast development of hardware recently. Various theory of details technology necessary to design game such as 3D MMORPG (Massive Multi-play Online Role Flaying Game) that do with third dimension. Cyber city should be absorbed. It is the detection speed that this treatise is necessary in game engine design. 3D MMORPG game engine has much factor that influence to speed as well as rendering processing because it express huge third dimension city´s grate many building and individual fast effectively by real time. This treatise nay get concept about the collision in 3D MMORPG and detection speed elevation of game engine through improved detection method. Space division is need to process fast dynamically wide outside that is 3D MMORPG´s main detection target. 3D is constructed with tree construct individual that need collision using processing geometry dataset that is given through new graph. We may search individual that need in collision detection and improve the collision detection speed as using hierarchical bounding box that use it with detection volume. Octree that will use by division octree is used mainly to express rightly static object but this paper use limited OSP by limited space division structure to use this in dynamic environment. Limited OSP space use limited space with method that divide square to classify typically complicated 3D space´s object. Through this detection, this paper propose follow contents, first, this detection may judge collision detection at early time without doing all polygon´s collision examination. Second, this paper may improve detection efficiency of game engine through and then reduce detection time because detection time of bounding box´s collision detection.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.136-148
• /
• 2006

A foundry makes various machinery parts made by iron. For manufacturing machinery parts, they usually uses wooden mold with molding sand and pour the molten iron into wooden mold through inlet. A foundry have many processes including Furan process, In Furan process workers prepares a wooden mold in the molding sand. So they fixes wooden mold in sand housing and then they fill the molding sand in the sand housing. Molding sand should be sticky enough to sustain the shape of wooden mold, so several materials are needed to prepare the suitable molding sand. The first step of Furan process is making the molding sand with molding sand and Voltaic Organic Compounds (VOC) and the second step of Furan process is pour the molding sand into the wooden molding housing. This two step of process generated noxious VOC and various size of dust. So the process is very dirty and dangerous one. Because of these, Workers frequently shrink out of the plant. The company related with foundry usually faced on the difficult situation for engagement and always have shortage of hiring problem. Through this study, we developed a system which removes toxic VOC and dust simultaneously. We design and construct real system and install it at real plant. Before setting up this system, the working surroundings VOC (for formaldehyde) 15 ppm and Dust(for $PM_{10}$) $8,000{\mu}g/m^3$. After setting up this system, working surroundings is improved by VOC (for formaldehyde) 0 ppm, Dust(for $PM_{10}$) $4{\mu}g/m^3$, and the work evasion factor is removed. So we contribute to solve hiring problem of this company and increasing the productivity also.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.78-88
• /
• 2016

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In design phase, especially, collaboration based on BIM system has being a key factor for successful next generation building project. Through the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. In various industrial fields, cloud computing technology is utilized as a promising solution which can reduce time and cost of hardware infrastructure. Among the cloud computing technology, VDI is receiving a great deal of attention from it market as an essential part cloud computing. VDI enables to host multiple individual virtual machines by using hypervisor. It has an advantage to easy main device management. Therefore, this study implements a step-by-step user's DaaS by analyzing the desktop resource data of the workers from Pre-design phase to Schematic design, Design develop and Construction design phase. It also develops BIM environment based on test of BIM modeler and designers in architectural design firm. The goal of the study is to enable the cloud computing BIM server. It provides cost saving, high-performance quality of working environment and cooperation's convenience and high security when doing BIM work in small and medium sized architectural design firm.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.189-203
• /
• 1992

Any money model should address the most important phenomenon of a monetary economy, which is the phenomenon of the rate of return dominance. Even if the holding returns on financial or nonfinancial assets are higher than the rate of return on fiat money holding, which is typically zero, people still hold and use money. In a period of accelerating inflation, number of dominating assets increases continuously, yet people continue to hold and use money. Wallace's (1980) overlapping generations model cannot address the rate of return dominance phenomenon. His model does not capture the mediun of exchange role of fiat money. In this paper, an overlapping types model of fiat money is constructed, in which different types of consumers have different preferences on different types of goods, are endowed with different types of goods, are located at seperated regions, and live for only two periods. In this model, people hold and use money despite the dominating assets, even if inflation accelates. Money in this case serves as a pure medium of exchange, whereas in Wallace's model, money serves as a pure store of value, and money disappears if a dominating asset exists. An interesting feature of the overlapping types model presented in this paper is that money does not provide a cheap approximation to an idealized and efficient real allocation. A monetary economy is always superior to a nonmonetary economy, because money helps overcome the incompleteness of the overlapping types friction. In a monetary economy, however, a pareto optimal allocation cannot always be achieved, because money cannot always overcome the overlapping types friction itself. Therefore, with the criterion of optimality of real allocations, the monetary economy is more optimal than a nonmonetary economy but less optimal than a complete Arrow-Debreu economy. This feature has important implications on macro modelling. Because of the difficulty in introducing money into a macro model in an essential and endogenous manner as in the overlapping types model of this paper, a macro model typically ignores money and studies real allocations without the money factor. The possible inefficiencies of a monetary economy, relative to a complete real Arrow-Debreu economy, may indicate differences in real allocations between the two models.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2014

There is a big risk of bullet impact because military rotorcraft is run in the battle environment. Due to the bullet impact, the rapid increase of the internal pressure can cause the internal explosion or fire of fuel cell. It can be a deadly damage on the survivability of crews. Then, fuel cell of military rotorcraft should be designed taking into account the extreme situation. As the design factor of fuel cell, the internal fluid pressure, structural stress and bullet kinetic energy can be considered. The verification test by real object is the best way to obtain these design data. But, it is a big burden due to huge cost and long-term preparation efforts and the failure of verification test can result in serious delay of a entire development plan. Thus, at the early design stage, the various numerical simulations test is needed to reduce the risk of trial-and-error together with prediction of the design data. In the present study, the bullet impact numerical simulation based on SPH(smoothed particle hydrodynamic) is conducted with the commercial package, LS-DYNA. Then, the resulting equivalent stress, internal pressure and bullet's kinetic energy are evaluated in detail to examine the possibility to obtain the configuration design data of the fuel cell.

• Management & Information Systems Review
• /
• v.15
• /
• pp.109-145
• /
• 2004

Upcoming 21st century, Management circumstance for a small and medium enterprise have been rapidly changed by Knowledge management, Informationization, Hi-technology. Changing from an era of small concept to strong concept, It will be a severe innovation period and can not survive with life as the same as the past, It is the era of best which mean only the best can survive, None of the average faculty can survive. Due to rapid proceeding of innovation of Informationization, It stimulate acceleration of technology innovation, infinity competition regardless the nation boarder, result in proceeding to Informationization. A small and medium enterprise is defined as smaller size of business than big business as point of capital, employee, output. It is concept, which usually used against concept of big business. When define a small and medium enterprise, criteria to determine a small and medium enterprise is depends on country and a category of business. However, In every country, A small and medium enterprise is getting be bigger and importance factor in whole industry. A small and medium enterprise is well developed and also well balanced with a large enterprise in the developed country. All around in the world, Interest about a small and medium enterprise is becoming higher. It is actively researching into a small and medium enterprise as the mean to create new employment, new industry, as means to from integration of a all and medium enterprise,as source of high competitive power. The status quo of rapid changing into informationization have been realized at considerable level in Korea. Information society is defined as information technology is main key to determine individuals competitiveness, which can solve effectively the side effect result from industrialization. It cleary imply that information technology is the most promising and important industry in 21st century. Therefore, We should seek to foster independent a small and medium enterprise and develop them corresponding to new concept of a small and medium enterprise in 21st century. The main frame of policy should be new economic system, which can contribute establishment of a small and medium enterprise, management innovation. It also attribute a small and medium enterprise to reveal their creative. New economic paradigm in 21st will be expanded with organization, market, technology. So far, a small and medium enterprise has been acknowledge as economic weaker and the one should be protected. However, In 21st century a small and medium enterprise will be considered as active majority or a source of creative. Development of technology to produce a small quantity with variety product and acceleration of knowledge and informationization will result in comparative merits of a small and medium enterprise. Hereby, The role and relative importance of a small and medium enterprise in our economic will getting be larger and It will be developed as the main force to activate the economic. However, Only a small and medium enterprise, which overcome difficulty with active desire and effort to improve their lot can be developed as a competitive enterprise in 21st century in considering themselves to be developed as diversity, active, independent, business by an enterprise.