• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.371-380
• /
• 2020

Video is principal information that facilitates commander's immediate command decision. Due to fading characteristics of radio link, however, it is difficult to stably transmit video in a multi-hop wireless environment. In this paper, we propose a MANET structure composed of a link adaptive routing protocol and a TDMA MAC protocol to stably transmit video traffic in a ultra-narrowband video streaming network. The routing protocol can adapt to link state change and select a stable route. The TDMA protocol enables collision-free video transmission to a destination using multi-hop dynamic resource allocation. As a result of simulation, the proposed MANET structure shows better video transmission performance than proposed MANET structure without link quality adaption, AODV with CSMA/CA, and OLSR with CSMA/CA structures.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.40-51
• /
• 2021

The purpose of this study is to diagnose urban spatial structures using spatial modeling techniques for balanced urban development as part of sustainable urban growth management. Since urban spatial structure is an interaction of various activities, it is necessary to interpret the analysis results in conjunction with the analysis of changes in spatial structural elements. In this study, population and transportation were approached for research purposes. Population data were applied to the Getis-Ord G_i^* method, a spatial statistical technique, to analyze the concentration-decreasing region of the population. Traffic data analyzed the trend of centrality change by applying commuting traffic O-D data to Social Network Analysis techniques. The analysis showed that urban imbalance was growing, and the centrality of transportation was changing. The results of the analysis of spatial structure elements could be interpreted by linking the results of each factor to each neighborhood unit, predicting changes in urban spatial structure and suggesting directions for sustainable urban growth management.These results could also be used as a decision-making tool for various urban growth management policies introduced to cope with rapid urban development and uncontrollable development in many cities around the world.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.461-476
• /
• 2015

Global warming has accelerated glacial retreat in the high Arctic. The exposed glacier foreland is an ideal place to study chronosequential changes in ecosystems. Although vegetation succession in the glacier forelands has been studied intensively, little is known about the microbial community structure in these environments. Therefore, this study focused on how glacial retreat influences the bacterial community structure and its relationship with soil properties. This study was conducted in the foreland of the Midtre Lovénbreen glacier in Svalbard (78.9°N). Seven soil samples of different ages were collected and analyzed for moisture content, pH, soil organic carbon and total nitrogen contents, and soil organic matter fractionation. In addition, the structure of the bacterial community was determined via pyrosequencing analysis of 16S rRNA genes. The physical and chemical properties of soil varied significantly along the distance from the glacier; with increasing distance, more amounts of clay and soil organic carbon contents were observed. In addition, Cyanobacteria, Firmicutes, and Actinobacteria were dominant in soil samples taken close to the glacier, whereas Acidobacteria were abundant further away from the glacier. Diversity indices indicated that the bacterial community changed from homogeneous to heterogeneous structure along the glacier chronosequence/distance from the glacier. Although the bacterial community structure differed on basis of the presence or absence of plants, the soil properties varied depending on soil age. These findings suggest that bacterial succession occurs over time in glacier forelands but on a timescale that is different from that of soil development.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.4
• /
• pp.199-206
• /
• 2004

Construction of a large offshore structure in coastal area may cause serious morphological changes for a wide region ranging from shoreline to offshore behind the structure. Shin et at. [2000] and Shin and Hong [2004] identified the sediment transport patterns behind the large offshore structure through a series of three dimensional movable bed experiments. In present study, a hybrid three dimensional beach deformation model was suggested based on those sediment transport mechanisms revealed by experimental results of the preceding studies. The model was verified by the results of the three dimensional moveable bed experiments and they agreed well not only in reappeared tombolo in shoreline side but also in the erosion and deposition region behind offshore structure. In addition, the model was applied to real beach deformation problem, which was occurred by construction of artificial offshore islands, and it validates the applicability of the model.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.9-14
• /
• 2007

To illusσ'ate the variation of current around artificial upwelling structure which is located in the South sea of Korea, current measurements using ADCP (Acoustic Doppler Current Profiler) during neap and spring tides were carried out on 27th July(summer)， 14th October and 30th November(Autumn), 2006. Current after the set up of artificial upwelling structure were shown different in the upper and lower layer, the boundary between the upper and lower layer was at $27{\sim}30m$ depth in summer. And the boundary layer was formed structure of three layer in Autumn. Upwelling and downwelling flow were occurred around the seamount， and these vertical flows were connected from surface to bottom The distribution of vertical shear and relative vorticity support the vertical flow around the seamount. The strength of vertical shear was higher and the direction of relative vorticity was anticlockwise (+) around the upwelling area.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.3
• /
• pp.103-110
• /
• 2012

This study aims to find out the geographical distribution, the physical structure and characteristic of Gudle-jang Paddy-field in Cheongsando. On the basis of this study, the potential value and the assignment for the preservation of Gudle-jang Paddy-field were suggested. Gudle-jang Paddy-field is centrally distributed to Cheongsando and has various features as follows. First, it has the Ondol structure which is used Gudle-jang. Second, it has an irrigation canal which has functions of the tank and the prevention of cold-weather damage as well as the irrigation and drainage canal. The values of Gudle-jang Paddy-field are as follows; 1) It is the peculiar and inherent agricultural structure which is only found in Cheongsando. 2) It is the structure that the agricultural civil engineering and the agricultural water management technique of traditional methode are applied. 3) It has the worths of the traditional culture of Korea. 4) It is the important resource creating superb rural landscape of the region. In spite of these values of Gudle-jang Paddy-field, there were little efforts to preserve it. From now on, it is needed to form of sympathy about the value of Gudle-jang Paddy-field and to make efforts for preservation of it. Also the institutional and political strategy should be provided to preserve and manage Gudle-jang Paddy-field.

• Journal of Fashion Business
• /
• v.25 no.5
• /
• pp.73-87
• /
• 2021

This study aimed to develop fashion designs by applying the PO (Provocative Operation) method as a 3D virtual clothing program and to derive the PO application method in fashion design. The first T-shirt design was presented as an existing thinking method, and the second design was developed by applying escape, reversal, exaggeration, distortion, and hopeful thinking techniques, which are techniques for 'provocation' of the PO method, to the first design. Thus, 18 T-shirt designs were developed as 3D virtual clothing, with 3 sets of 6 designs, including the 1st and 2nd designs. The method of using the 'provocation' techniques of the PO method in the development of fashion design derived from this was as follows. First, the 'escape' technique was designed in such a way that a part of the detail or structure was deleted, or a part of the structure or expression element of another item was applied. Second, the 'inversion' technique was expressed by inverting the position or shape of a detail or structure up, down, left, and right; fitting the structural detail or reversing the shape; or converting the structure and form. Third, the 'exaggeration' technique exaggerated the size, length, and volume of a structure's form or detail. Fourth, the 'distortion' technique was expressed as a distortion of lines or shapes or a visual distortion using the Trompe l'oeil technique. Fifth, the 'hopeful thinking' technique was developed and expressed from the idea of an hypothetical 'if' it was absurd, irrational, and unrealistic.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.770-779
• /
• 2014

In this study, a numerical estimation method for 3D underwater radiated noise pattern using hull vibration and total acoustic power of the vibrating structure in the far-field is proposed. The underwater radiated noise pattern is known to be predicted using the vibration signals and radiation efficiency of each surface patch. But it is very difficult to know radiation efficiency of each surface patch which is one of important factors to calculate the 3D underwater radiated noise pattern. Instead of using radiation efficiency of each patch, the underwater radiated noise level is modified with the total acoustic power of the vibrating structure. The suggested estimation method for underwater radiated noise pattern is discussed with numerical model.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.948-949
• /
• 2006

An infiltration technique using W-Cu composite powder has been developed to enhance microstructural uniformity of W-Cu pseudo-alloy. W-Cu composite powder, manufactured by reduction from $WO_3$ and CuO powder mixtures, were blended with W powder and then cold iso-statically pressed into a cylindrical bar under 150 MPa. The pressed samples were pre-sintered at $1300^{\circ}C$ for 1 hour under hydrogen to make a skeleton structure. This skeleton structure was more homogeneous than that formed by using W and Cu powder mixtures. The skeleton structures were infiltrated with Cu under hydrogen atmosphere. The infiltrated W-Cu pseudo-alloy showed homogeneous microstructure without Cu rich region

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.89-96
• /
• 2015

The weapon systems development has some distinct characteristics in that a big size of government budget (derived from national tax) has been expended frequently and the completion of the development projects seems to take long. Thus, the impact of the potential changes in the required operational capability on the development activities can induce some type of project risks. As such, proper management of project risk has been one of crucial subjects in the weapon systems development. Although a variety of methods can be considered, an approach based on the test and evaluation (T&E) process has been selected in this paper in order to appropriately handle those potential risks. In the study of the underlying T&E process, the safety consideration (for instance, explosiveness) of weapon systems is also included. To achieve the objective of the paper, a step-by-step procedure is first presented in the analysis of the T&E process. Then, to pursue some enhancement on the process, a set of necessary and useful activities are added in terms of risk and safety management. The resultant process is further analyzed and tailored based on a design structure matrix method. The case study of a tank development is also discussed.