• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.229-230
• /
• 2017

• Journal of Information Processing Systems
• /
• v.8 no.4
• /
• pp.539-554
• /
• 2012

Model-driven and component-oriented development is increasingly being used in the development of embedded systems. When combined, both paradigms provide several advantages, such as higher reuse rates, and improved system quality. Performing model-driven and component-oriented development should be accompanied by a component model and a method that prescribes how the component model is used. This article provides an overview on the MARMOT method, which consists of an abstract component model and a methodology for the development of embedded systems. The paper describes a feasibility study that demonstrates MARMOT's capability to alleviate system design, verification, implementation, and reuse. Results indicate that model-driven and component-based development following the MARMOT method outperforms Agile development for embedded systems, leads to maintainable systems, and higher than normal reuse rates.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.877-883
• /
• 2009

This study has analyzed the scale, location, resource potential and feasibility of offshore wind farm scientifically and systematically based on the national wind map and GIS. For long-term wind power development, this study pursues siting strategy building, selection of target area and deciding development priority as well as the presenting a basis for assessment that are necessary for policy decision making by making theme layers under GIS environment. According to the analysis after organizing technological development by stages, even if only the most suitable sites are developed among the area of offshore wind farm candidates that can be developed under the current technological standard, it has been evaluated as being able to develop about 3 times of the wind power dissemination target until 2012. It is expected that about 5% of territorial water area can be developed in a short-term future while the southern offshore area possessing relatively favorable wind resource than the western offshore has been identified as the most feasible site. While about 23% of territorial water area has been classified as potential area for offshore wind farm development in a long-term future, even Jeju Island and offshore of Ulsan possessing excellent wind resource have been analyzed as feasible sites. The feasibility assessment of offshore wind lam development established by this study is expected to assist national strategy building for accomplishing the wind power dissemination target.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.212-215
• /
• 2001

This study was carried out to examine the feasibility of urban landscape development plan that can accomodate urban agricultural lands and go well with urban environments. Effective development and utilization methods of urban agricultural lands as a part of urban landscape were studied through the analysis of public functions of urban agricultural lands by using GIS.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.45-55
• /
• 2016

In this study we carry out usability evaluation for adjustable electric beds for home care that are used the most by the elderly, and examines dissatisfaction of users. In this sense, we performed an interview with stakeholders including bed users, developers and suppliers to develop usability evaluation contents. In addition, we carried out feasibility and reliability study over evaluation form through usability assessment, and developed usability evaluation indicator.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.176-178
• /
• 2011

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.72-77
• /
• 2008

General aspects of deepwater petroleum exploration and production were identified and related technical challenges were addressed. Historical perspectives, insight, processes, and engineering applications are reviewed to enhance the design capability of the domestic offshore industry. The technical challenges and unique aspects of deepwater exploration and production were identified. The assessment of deepwater exploration, drilling, and production systems is a key stage for performing the front end engineering design (FEED). The global trends in deepwater development, including the feasibility for Korea, were reviewed.

• Korean Journal of Agricultural Science
• /
• v.27 no.2
• /
• pp.158-175
• /
• 2000

Up to date, the economic feasibility analysis on land consolidation and on-farm development projects were mainly depended upon the direct benefits from market value of project outputs. Therefore the projects were neglected in allocation of the government's financial funds and loans on account of undervaluation of the project benefits including socio-economic and environmental values of the projects. Accordingly the Extended Benefit Cost Analysis Method should be adapted to cover not only the benefits such as non-market values of environmental functions of the projects and but also the economic market values of the project outputs. The main objectives of this study is (1) to provision of the guideline for economic feasibility analysis based on the IBRD and ADB guidelines, (2) to estimate the benefits such as Productivity increase effect, labor saving effect, off-farm income increase effect during off-farm season, saving of O&M cost of farm mechanization, enhance of farmer's public health, increase of environmental public function of paddy fields, effect of food security and establishment of peaceful and uncontroversial rural society by implementing the land consolidation and on-farm development, (3) to introduce the newly adapted analytical method as the extended benefit cost analysis which could make possible the analysis of non-market goods such as the food security value and the environmental public value of paddy fields. To carry out the study, the publication on the guideline for economic analysis of agricultural projects were reviewed and consulted and for the post evaluation of the land consolidation and on-farm development project, field survey in Jeongja area were made for the feasibility study of the project by new method. According to the initial project plan, Jeongja land consolidation and on-farm development project has 96ha of benefit area and the project was started in 1989 and completed in the spring, 1990. The total project costs were amounted to 1,052 million won and the annual project benefits were estimated at 135.4 million in 1989 constant market prices. On the other hand, the newly estimated project benefits as a part of post evaluation of the project were amounted to 602.1 million won including all the benefits from the market and non-market commodities of the project as mentioned above column. The original IRP(Internal rate of return) of the project was estimated at 15.81%. On the other hand, the IRR of the post evaluation of the project was amounted to 16.83%. In case of including the benefit from the environment public function of paddy field, the SRR(Social Rate of Return) was reached to 38.81% and when we added the benefit from food security of the project, the SRR showed very high rate as 46.41%. In conclusion, the project were verified socio-economically feasible and environmentally sustainable considering the above decision making criteria.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.2
• /
• pp.71-85
• /
• 2022

The food self-sufficiency rate of agricultural products in Korea, excluding rice, is around 20%, and the government is promoting various policies including a Multiple-Purpose Utilization of Paddy Fields project, to increase the self-sufficiency rate of major grains. The project for Multiple-Purpose Utilization of Paddy Fields is being promoted as a part of a program to create farmland infrastructure to facilitate the cultivation of crops other than rice in rice paddies, and pilot projects were started in four regions in 2020. The purpose of this study is to analyze the economic effects of the pilot project for Multiple-Purpose Utilization of Paddy Fields, and to propose policies to increase the effectiveness of the project. In order to analyze the economic effect, we estimated the change in farm income generated by switching from rice to other crops, and measured the effect of welfare change using the Equilibrium Displacement Model (EDM). As a result of the analysis, social welfare is expected to increase when the pilot project for Multiple-Purpose Utilization of Paddy Fields is implemented, and the income of the beneficiary farmers is also expected to improve compared to that of single-cropping when double-cropping is implemented. However, it was found that the economic feasibility of the project differs depending on the crops converted. Juksan-myeon, Gimje-si, which is an area where soybean production was successful, was analyzed from the viewpoint of increasing the economic feasibility of the pilot project. Their success factors were analyzed into four major factors: infrastructure, farming methods, education, and collaboration with local agricultural organizations. If such a success story can be utilized in the future project implementation process, it can contribute to the improvement of farm household income and national economic welfare.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.113-119
• /
• 2011

The Korea navy has a vital national interest in maritime security. The national strategy for maritime security focuses on preventing terrorism, crime, and hostile acts in the maritime domain. This requires the development of high speed crafts for maritime security in the South Korea domain. This paper reviews the state of the art on the development of high speed craft internationally, including efforts by the U.S. navy, and analyses the riverine environment to operate high speed crafts in South Korea. This paper makes specific proposals for high speed craft such as their main dimensions, speed, endurance, hull structure material, propulsion system, and general arrangement and 3D shape. This paper was used in the generation of basic resources for future ROC (requirement of capability) of high speed crafts using an engineering methodology.