• Title/Summary/Keyword: Developing Measurement

Search Result 995, Processing Time 0.028 seconds

Toward Next Generation Solar Coronagraph: Diagnostic Coronagraph Experiment

  • Cho, Kyung-Suk;Yang, Heesu;Lee, Jaeok;Bong, Suchan;Choi, Seonghwan;Kim, Jihun;Park, JongYup;Park, YoungDeuk;Kim, Yeon-Han
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.44 no.2
    • /
    • pp.42.2-42.2
    • /
    • 2019
  • Korea Astronomy and Space Science Institute (KASI) has been developing a next-generation coronagraph (NGC) in cooperation with NASA to measure the coronal electron density, temperature, and speed using four different filters around 400 nm. To demonstrate technology for the measurement through the 2017 total solar eclipse across the USA, KASI organized an expedition team to demonstrate the coronagraph measurement scheme and the instrumental technology. The observation site was in Jackson Hole, Wyoming, USA. We built an eclipse observation system, so-called Diagnostic Coronal Experiment (DICE), which is composed of two identical telescopes to improve a signal to noise ratio. The observation was conducted with 4 wavelengths and 3 linear polarization directions according to the planned schedule in a limited total eclipse time of about 140 seconds.Polarization information of corona from the data was successfully obtained but we failed to get the coronal electron temperature and speed information due to a low signal-to-noise ratio of the optical system. In this study, we report the development of DICE and observation results. TSE observation and analysis by using our own developed instrument gave an important lesson that a coronagraph should be carefully designed to archive the scientific purpose. This experience through TSE observation will be very useful for a success of NASA-KASI joint missions called the Balloon-borne Investigation of the Temperature and Speed of Electrons in the Corona (BITSE) and COronal Diagnostic EXperiment (CODEX).

  • PDF

Developing GPS Code Multipath Grid Map (CMGM) of Domestic Reference Station (국내 기준국의 GPS 코드 다중경로오차 격자지도 생성)

  • Gyu Min Kim;Gimin Kim;Chandeok Park
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.13 no.1
    • /
    • pp.85-92
    • /
    • 2024
  • This study develops a Global Positioning System (GPS) Code Multipath Grid Map (CMGM) of each individual domestic reference station from the extracted code multipath of measurement data. Multipath corresponds to signal reflection/refraction caused by obstacles around the receiver antenna, and it is a major source of error that cannot be eliminated by differencing. From the receiver-independent exchange format (RINEX) data for two days, the associated code multipath of a satellite tracking arc is extracted. These code multipath data go through bias correction and interpolation to yield the CMGM with respect to the azimuth and elevation angles. The effect of the CMGM on multipath mitigation is then quantitatively analyzed to improve the Root Mean Square (RMS) of averaged pseudo multipath. Furthermore, the single point positioning (SPP) accuracy is analyzed in terms of the RMS of the horizontal and vertical errors. During two weeks in February 2023, the RMSs of the averaged pseudo multipath for five reference stations decreased by about 40% on average after CMGM application. Also, the SPP accuracies increased by about 7% for horizontal errors and about 10% for vertical errors on average after CMGM application. The overall quantitative analysis indicates that the proposed approach will reduce the convergence time of Differential Global Navigation Satellite System (DGNSS), Real-Time Kinematic (RTK), and Precise Point Positioning (PPP)-RTK correction information in real-time to use measurement data whose code multipath is corrected and mitigated by the CMGM.

A study on developing a new self-esteem measurement test adopting DAP and drafting the direction of digitalizing measurement program of DAP (청소년 자존감 DAP 인물화 검사 개발 및 디지털화 측정 시스템 방향성 연구)

  • Woo, Sungju;Park, Chongwook
    • Journal of the HCI Society of Korea
    • /
    • v.8 no.1
    • /
    • pp.1-9
    • /
    • 2013
  • This is to develop a new way of testing self-esteem by adopting DAP(Draw a Person) test and to make a platform to digitalize it for young people in the adolescent stage. This approach is to get high effectiveness of the self-esteem measurement using DAP test, including some personal inner situations which can be easily missed in the large statistical analysis. The other objective of this study is digitalize to recover limits of DAP test in the subjective rating standard. It is based on the distribution of the figure drawing expressed numerically by the anxiety index of Handler. For these two examinations, we made experiment through 4 stages with second grade middle school 73 students from July 30th to October 31th in 2009 during 4 months. Firstly, we executed 'Self Values Test' for all 73 people, and divided them into two groups; one is high self-esteem group of 36 people, the other is low self-esteem group of 37 people. Secondly, we regrouped them following D (Depression), Pd (Psychopathic Deviate), Sc (Schizophrenia) scales of MMPI; one is high self-esteem group of 7 people, the other is low self-esteem group of 13 people. Thirdly, we conducted DAP test separately for these 20 people. We intended to verify necessity and appropriateness of direction of 'Digitalizing Measurement System' by comparing and analyzing relation between DAP and Self-esteem following evaluation criteria which has similarity in 3 tests, after executing DAP to reflect peculiarity of adolescents sufficiently. We compared and analyzed result abstracted by sampling DAP test of two groups; One is high self-esteem group of 2 people, the other is low self-esteem group of 2 people; to confirm whether we can improve limitation that original psychological testing has by comparing mutual reliance of measurement test. Finally, with DAP test gained from correlations between self-esteem and melancholia following as above-mentioned steps, we discovered possibility of realization to get a concrete and individual criteria of evaluation based on Expert System as a way of enhancing accessibility in quantitative manner. 'Digitalizing Measurement Program' of DAP test suggested in this study promote results' reliability based on existing tests and measurement.

  • PDF

A Study of Fitness Evaluation System for Knit Bodice Pattern (니트 상의 패턴의 맞음새 평가방법 연구)

  • 천종숙;허지혜
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.22 no.4
    • /
    • pp.482-492
    • /
    • 1998
  • With the purpose of developing a objective fitness evaluation system for knits, the basic bodice pattern for knit was drafted and the suitability of the altered pattern was evaluated. For each of nine different knits, six sleeveless shirts were made with patterns that were altered by different pattern alteration rate: 0%, 30%, 40%, 50%, 60%, or 70% of the stretch rate of the knit. The panel that was composed of 25 clothing specialists evaluated the fitness of the garments. The distance from the dress form landmark to the garment landmark was measured from each experimental garment. And the results of garment fitness evaluation and the measurement of distance from the dress form landmark to garment landmark were compared. The results of this study are as follows: There was high correlation(r$\geq$0.9) between the evaluation of the panel about the garment fit and the landmarks distance. The stretch rate of knits affected the evaluation of the garment fit. The stretch rate in course of knits affected on the garment fit at crosswise direction. The suitable pattern alteration rate was lower than 30% for the knits with high stretch rate in course. It was concluded that in order to get the appropriate knit bodice pattern length, the front bodice pattern must be less shorten than the back bodice pattern. The alteration rate at hip line must be lower than for waist or bust line.

  • PDF

Influence of Substrate on Mechanical Characteristics of ZnO Thin Film by NI Technology (NI법에 의한 기계적 특성에 미치는 ZnO박막의 기판재의 영향)

  • Jung Hun-Cbae;KIM Dong-Hyun;Yoon Han-Ki;Lim Hee-Sup;Yu Yun-Sik
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.342-346
    • /
    • 2004
  • Recently there has been a great world-wide interest in developing and characterizing new nano-structured materials. These newly developed materials are often prepared in limited quantities and shapes unsuitable for the extensive mechanical testing. The development of depth sensing indentation methods have introduced the advantage of load and depth measurement during the indentation cycle. In the present work, ZnO thin films are prepared on the Glass, GaAs(100), Si(111), and Si(100) substrates at different temperatures by pulsed laser deposition(PLD) method. Because the potential energy in c-axis is law, the films always shaw c-axis orientation at the optimized conditions in spite of the different substrates. Thin films are investigated by X-ray diffractometer and Nano indentation equipment. From these measurements it is possible to get elastic modulus and hardness of ZnO thin films on all substrates.

  • PDF

Developing key Performance Indicators for Financial IT Security (금융IT 보안조직 역량강화를 위한 핵심성과지표(KPI) 도출에 관한 연구)

  • Jang, Sung Ok;Lim, Jong In
    • The Journal of Society for e-Business Studies
    • /
    • v.18 no.3
    • /
    • pp.125-142
    • /
    • 2013
  • As a reinforcing strategic-alignment of IT business, Financial Service becomes more rely on IT systems. It needs to continuous information security activities to provide a secure and reliable finance service. Performance measurement of information security activities can be useful for decision and management support. The purpose of this study is to derive CSF(Critical Success Factor) and KPI(Key Performance Indicator) based on K-ISMS, Financial IT Information Security Standards. Providing a rationale can be used to determine key performance indicators, which are utilized as basic data for establishing security policies for financial IT security competency.

The study of development for military device adopts diverse process (다양한 프로세스를 적용한 군장비 개발에 관한 연구)

  • Lee, Sang-Myung;Kim, Young-Kil
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.10
    • /
    • pp.2473-2478
    • /
    • 2013
  • The recently developed military system adopts System Engineering for quality insurance. The process of military system's development basically adopts specification(MIL-STD-499) and system engineering(ISO/IEC 15288) that was developed by America. Recently the level of company's capability maturity is granted by measurement and assessment for the level of CMM or CMMI that was developed by Carnegie Mellon University. This article introduces adopted range of process that developed military system adopted additional process of CMMI. This article writes a merit of process for military system's output that is developing device adopted diverse process.

Simulation of Spacecraft Attitude Measurement Data by Modeling Physical Characteristics of Dynamics and Sensors

  • Lee, Hun-Gu;Yoon, Jae-Cheol;Cheon, Yee-Jin;Shin, Dong-Seok;Lee, Hyun-Jae;Lee, Young-Ran;Bang, Hyo-Choong;Lee, Sang-Ryool
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2004.08a
    • /
    • pp.1966-1971
    • /
    • 2004
  • As the remote sensing satellite technology grows, the acquisition of accurate attitude and position information of the satellite has become more and more important. Due to the data processing limitation of the on-board orbit propagator and attitude determination algorithm, it is required to develop much more accurate orbit and attitude determination, which are so called POD (precision orbit determination) and PAD (precision attitude determination) techniques. The sensor and attitude dynamics simulation takes a great part in developing a PAD algorithm for two reasons: 1. when a PAD algorithm is developed before the launch, realistic sensor data are not available, and 2. reference attitude data are necessary for the performance verification of a PAD algorithm. A realistic attitude dynamics and sensor (IRU and star tracker) outputs simulation considering their physical characteristics are presented in this paper, which is planned to be used for a PAD algorithm development, test and performance verification.

  • PDF

Development of E-Mail Education for Hyperlipidemia Health Check-up and Application Effects (고지혈증 수진자를 위한 전자메일 교육 프로그램 개발 및 적용효과)

  • Han, Sang-Sook;Kim, Sun-Hee
    • Journal of Korean Academy of Nursing
    • /
    • v.36 no.7
    • /
    • pp.1154-1163
    • /
    • 2006
  • Purpose: This study was to monitor the effects of forming desirable eating and exercise habits and change the blood lipid levels by developing and applying E-Mail educational programs for a hyperlipidemia health check-up. Method: The research design used a nonequivalent control group pre-post test. Ninety-nine subjects (Exp.=50, Cont.=49) were selected randomly and the male subjects agreed to a hyperlipidemia health check-up at a comprehensive medical screening center. This study verified validity and reliability through factor analysis on a life habit measurement tool. The data was analyzed with SPSS win 12.0 using an $X^2-test$, t-test, ANOVA and ANCOVA. Result: Eatingand exercise habit scores of the experimental group which were educated through E-Mails changed considerably more than that of the control group which was not educated. Total-cholesterol and LDL-cholesterol in the experimental group was considerably lower than that in the control group, but HDL-cholesterol increased considerably Triglycerides, however, didn't show change. Conclusion: An E-Mail educational program may be applied as a hyperlipldemia health check-up nursing intervention strategy.

Definition and Case Study of Effectiveness Metrics for e-Navigation Usability Testing (e-Navigation 사용성 평가를 위한 유효성 메트릭 정의 및 사례)

  • Jung, Jieun;Lee, Seojeong
    • Journal of Korea Multimedia Society
    • /
    • v.20 no.8
    • /
    • pp.1338-1346
    • /
    • 2017
  • To achieve software quality and human-centred design for electronic ship navigation called e-navigation, an international guideline of software quality assurance and human-centred design was approved in 2015. Usability is a common goal of both software quality assurance and human-centred design as developing e-navigation system and software developments. Therefore, research is needed to evaluate the usability of e-navigation systems and software such as metrics that can use usability testing. This paper derives effectiveness metrics for e-Navigation usability testing based on international standards. The research method is to analyses and compares the effectiveness measurement and metrics in ISO 9241-11 for human-centered design and ISO/IEC 25022 and 25023 for software quality to find out measurements and metrics being defined commonly. The derived metrics are applied to Electronic Chart Display and Information System as a case study based on performance standard.