• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.623-629
• /
• 2010

A geographical routing protocol is typically utilized for a route selection of VANET. Even if it is conceptually well adapted into VANET, message delivery tends to be unreliable with frequent network partitions, which mainly come from the inherent characteristics such as high mobility and irregular traffic density. In this paper, we deal with a method to enable reliable message delivery with reflecting the traffic density on routing decision. By concatenating the message delivery cost of each of inbetween junction section, $1^{st}$ and $2^{nd}$ shortest paths are initially determined. When it is not possible to deliver the message on a junction on the 1st path, we utilize two novel ideas, that is, letting the message stay on the junction to find out a new relay node, and putting a replicated copy to reach via a detour path. By using the NS-2 network simulator, our method has been examined in terms of message delivery rate and delay. It shows that our method is much efficient than the other method in the low density environment, while it brings similar results in the high density environment.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.129-139
• /
• 2009

The transportation network is a critical infrastructure in the event of natural and human caused disasters such as rainfall, snowfall, and terror and so on. Particularly, the transportation network in an urban area where a large number of population live is subject to be negatively affected from such events. Therefore, efficient traffic operation plans are required to assist rapid evacuation and effective detour of vehicles on the network as soon as possible. Recently, ubiquitous communication and sensor network technology is very useful to improve data collection and connection related emergency information. In this study, we develop a specific algorithm to provide evacuation route and detour information only for vehicles under emergency situations. Our algorithm is based on shortest path search technique and dynamic traffic assignment. We perform the case study to evaluate model performance applying hypothetical scenarios involved terror. Results show that the model successfully describe effective path for each vehicle under emergency situation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.193-201
• /
• 2011

The provision of traffic information plays an important role in increasing social benefit not only by saving travel time for individuals but also by improving the efficiency of road operation. VMS(Variable Message Sign) helps on-wheel drivers easily understand the road situation, and also provides real-time traffic information to people on the streets. However, it has not been sufficiently studied on how traffic information based on VMS influences on the drivers' selection of route. This study investigated how drivers use VMS traffic information and how they are satisfied with it. Then, the model of drivers' route selection was specified with the types of traffic information and the expected travel time to examine the influence on the selection of drivers' route. The model was estimated and analyzed in three types according to the condition of detour roads, and the rate of route change and the degree of sensitivity was calculated from the estimation. The results of analysis are as follows. the $1^{st}$ type model showed the 10% of route change for the travel time saving of 5minutes, and the 81.6% of route change for the travel time saving of 20minutes. The $2^{nd}$ type led to the range of route change from 14.2% to 92.7% over the 5 through 20 minutes of travel time saving. The $3^{rd}$ model resulted in the 99.1% of route change. The sensitivity of route change showed the highest for the travel time saving of 11 minutes with the $1^{st}$ type model, 9 minutes with the $2^{nd}$ type model, and 5 minutes with the $3^{rd}$ type model respectively.

• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.145-158
• /
• 2015

A network connectivity has been regarded as a key element to strengthen a business competitive power in the aviation industry, so many airport authorities try to attract the new airlines and scheme out new air routes. With this trend, a study for an induced travel demand estimation methodology is needed. This study introduces a demand estimation method, especially for a new air route to a promising destination. With the results of previous studies, the derived demand is classified into four types - Local, Beyond, Behind and Bridge. The explanatory variables are established for each type of demand and the main independent variables are composed of distance, ratio of detour, and relative capacity compared with other airports. The equations using such variables and statistically significant coefficients are suggested as the model to make an estimation of derived demand for a new route. Therefore this study will be expected to take an initial step for all related parties to be involved more deeply into developing new air routes to enhance network connectivity.

• Spatial Information Research
• /
• v.16 no.1
• /
• pp.65-77
• /
• 2008

There have been many studies and technologies that define a current location of a moving vehicle with GPS(Global Positioning System). However, the navigation system with GPS has troubles to search an optimized route considering data such as realtime parking status and road conditions. Moreover, the GPS systems show malfunction in the downtown with very tall buildings, underground parking lot and the inside of buildings. On the contrary, the RFID systems are able to reflect real-time status of parking lots and roads in the downtown. This paper proposes a system of guiding path for parking lots to consider real-time constraints based on RFID. The results obtained from the implemented system show smooth guiding of a new route after immediately sensoring the change of the information of parking lots and roads: if a parking lot that a vehicle is heading to is fully occupied, the system re-searches a new route for a neighbor parking lot and immediately transfers it to customer's mobile, and if the designated route is under construction, the system guides a detour path. The proposed method will be useful for advanced integrated parking control system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.82-96
• /
• 2020

The Demand Responsive Transit (DRT) system is the flexible public transport service that determines the route and schedule of the service vehicles according to users' requests. With increasing importance of public transport systems in urban areas, the development of stable and fast routing algorithms for DRT has become the goal of many researches over the past decades. In this study, a new heuristic method is proposed to generate fast and efficient routes for multiple vehicles using demand clustering and destination demand priority searching method considering the imbalance of users' origin and destination demands. The proposed algorithm is tested in various demand distribution scenarios including random, concentration and directed cases. The result shows that the proposed method reduce the drop of service ratio due to an increase in demand density and save computation time compared to other algorithms. In addition, compared to other clustering-based algorithms, the walking cost of the passengers is significantly reduced, but the detour time and in-vehicle travel time of the passenger is increased due to the detour burden.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.17-23
• /
• 2010

In the mobile cloud computing, the mobile node should request and receive the services while being connected. In PMIPv6, all packets sent by mobile nodes or correspondent nodes are transferred through the local mobility anchor. This unnecessary detour still results in high delivery latency and significant processing cost. Several PMIPv6 route optimization schemes have been proposed to solve this issue. However, they also suffer from the high signaling costs and handover latency when determining the optimized path. We propose the route optimization handover scheme which adopts the prediction algorithm in PFMIPv6. In the proposed scheme, the new mobile access gateway establishes the bi-directional tunnel with the correspondent node's MAG using the context message when the mobile node's handover is imminent. This tunnel may eliminate the need of separate route optimization procedure. Hence, the proposed scheme can reduce the signaling cost than other conventional schemes do. Analytical performance evaluation is preformed to show the effectiveness of the proposed scheme. The result shows that our scheme is more effective than other schemes.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.56-60
• /
• 2008

Increasing urban sprawl and climate changes have been causing unexpected high-intensity rainfall events. Thus there are needs to enhance conventional disaster management system for comprehensive actions to secure safety. Therefore long-term and comprehensive flood management plans need to be well established. Recently torrential snowfall are occurring frequently, causing have snow traffic jams on the road. To secure safety and on-time operation of the Bi-modal tram system, well-structured disaster management system capable of analyzing the urban flash flooding and snow pack melt/freezing due to unexpected rainfall event and snowfall are needed. To secure safety of the Bi-modal tram system due to torrential snowfall, the snow melt simulation capability was investigated. The snow accumulation and snow melt were measured to validate the SWMM snow melt component. It showed that there was a good agreement between measured snow melt data and the simulated ones. Therefore, the Bi-modal tram disaster management system will be able to predict snow melt reasonably well to secure safety of the Bi-modal tram system during the winter. The Bi-modal tram disaster management system can be used to identify top priority area for snow removal within the tram route in case of torrential snowfall to secure on-time operation of the tram. Also it can be used for detour route in the tram networks based on the disaster management system predicted data.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.1
• /
• pp.33-40
• /
• 2022

With the recent increase in the development of military drones, they are adopted and used as the combat system of battalion level or higher. However, it is difficult to use drones that can be used in battles below the platoon level due to the current conditions for the formation of units in the Korean military. In this paper, therefore, we developed a program drones equipped with a thermal imaging camera and LiDAR sensor for reconnaissance and exploration that can be applied in battles below the platoon level. Using these drones, we studied the possibility and feasibility of drones for small-scale combats that can find hidden enemies, search for an appropriate detour through image processing and conduct reconnaissance and search for battlefields, hiding and cover-up through image processing. In addition to the purpose of using the proposed drone to search for an enemies lying in ambush in the battlefield, it can be used as a function to check the optimal movement path when a combat unit is moving, or as a function to check the optimal place for cover-up or hiding. In particular, it is possible to check another route other than the route recommended by the program because the features of the terrain can be checked from various viewpoints through 3D modeling. We verified the possiblity of flying by designing and assembling in a form of adding LiDAR and thermal imaging camera module to a drone assembled based on racing drone parts, which are open source hardware, and developed autonomous flight and search functions which can be used even by non-professional drone operators based on open source software, and then installed them to verify their feasibility.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.1
• /
• pp.19-28
• /
• 2019

The purpose of this study is to evaluate the walking behavior analysis methodology used in the previous studies, paying attention to the demand for empirical data collecting for urban and neighborhood planning. The preceding researches are divided into (1)Recording, (2) Surveys, (3)Statistical data, (4)Global positioning system (GPS) devices, and (5)Mobile Big Data analysis. Next, we analyze the precedent research and identify the changes of the walkability research. (1)being required empirical data on the actual walking and moving patterns of people, (2)beginning to be measured micro-walking behaviors such as actual route, walking facilities, detour, walking area. In addition, according to the trend of research, it is analyzed that the use of GPS device and the mobile big data are newly emerged. Finally, we analyze pedestrian data based on mobile big data in terms of 'application' and distinguishing it from existing survey methodology. We present the possibility of mobile big data. (1)Improvement of human, temporal and spatial constraints of data collection, (2)Improvement of inaccuracy of collected data, (3)Improvement of subjective intervention in data collection and preprocessing, (4)Expandability of walking environment research.