• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.467-486
• /
• 2017

A method for decoupling reliability based design optimization problem into a set of deterministic optimization and performing a reliability analysis is described. The inner reliability analysis and the outer optimization are performed separately in a sequential manner. Since the outer optimizer must perform a large number of iterations to find the optimized shape and size of structure, the computational cost is very high. Therefore, during the course of this research, new multilevel reliability optimization methods are developed that divide the design domain into two sub-spaces to be employed in an iterative procedure: one of the shape design variables, and the other of the size design variables. In each iteration, the probability constraints are converted into equivalent deterministic constraints using reliability analysis and then implemented in the deterministic optimization problem. The framework is first tested on a short column with cross-sectional properties as design variables, the applied loads and the yield stress as random variables. In addition, two cases of curvilinearly stiffened panels subjected to uniform shear and compression in-plane loads, and two cases of curvilinearly stiffened panels subjected to shear and compression loads that vary in linear and quadratic manner are presented.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.221-221
• /
• 2004

• 시스템엔지니어링학술지
• /
• 제3권1호
• /
• pp.41-48
• /
• 2007

This paper presents a design methodology for developing a new push scooter. A case study is clone with effective planning processes to ensure the product quality under the different phases of a product design process. Parametric model based design process simulation and optimization is implemented by using ANSYS application tool. The relationship matrix and decision matrix are drawn by using several methods. The simulation results for deterministic design and robust design are compared. This entire design process phase can support the design and quality improvements for a new product development.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.341-344
• /
• 1993

This paper presents the general MRAC algorithm design, it's real time implementation and investigates the effect of purely deterministic disturbances to adaptive control algorithm. The design of adaptive control algorithm to reject the disturbances properly is also presented. In real time application, adaptive control algorithm is considered to investigate its performance by using DC motor. Disturbance rejection algorithm is investigated in simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1846-1851
• /
• 2003

Approximate optimization has become popular in engineering field such as MDO and Crash analysis which is time consuming. To accomplish efficient approximate optimization, accuracy of approximate model is very important. As surrogate model, Kriging have been widely used approximating highly nonlinear system . Because Kriging employs interpolation method, it is adequate for deterministic computer simulation. Because there are no random errors and measurement errors in deterministic computer simulation, instead of classical DOE ,space filling experiment design which fills uniformly design space should be applied. In this work, various space filling designs such as maximin distance design, maximum entropy design are reviewed. And new design improving maximum entropy design is suggested and compared.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1426-1433
• /
• 2005

In this paper, reliability analysis of surface settlement by ground water drawdown is performed using a reliability-groundwater flow numerical model. The result is compared with that of the deterministic model to evaluate the influence of the uncertainty from hydraulic conductivity in the soft ground as well as to determine the range of hydraulic conductivity of grouted ground. From the analyses, it was found that probability of failure to exceed the tolerable settlement was very high, if the hydraulic conductivity of grouted ground is decided from the deterministic flow model only. Reliability analysis which evaluates variance of hydraulic conductivity should be used together with the deterministic model for grouting design of tunnels to prevent ground water drawdown.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.61-69
• /
• 2007

The objective of this work is to integrate reliability analysis into topology optimization problems. We introduce the reliability constraint in the topology optimization formulation, and the new model is called Reliability-Based Topology Optimization (RBTO). The application of the RBTO model gives a different topology relative to the classical topology optimization that should be deterministic. When comparing the structures resulting from the deterministic topology optimization and from the RBTO model, the RBTO model yields structures that are more reliable than the deterministic ones (for the same weight). Several applications show the importance of this integration.

• 한국해양공학회지
• /
• 제19권1호
• /
• pp.26-32
• /
• 2005

Recent earthquakes, measuring over a magnitude of 5.0, on the eastern coast of Korea, have aroused interest in earthquake analyses and the seismic design of caisson-type breakwaters. Most earthquake analysis methods, such as equivalent static analysis, response spectrum analysis, nonlinear analysis, and capacity analysis, are deterministic and have been used for seismic design and performance evaluation of coastal structures. However, deterministic methods are difficult for reflecting on one of the most important characteristics of earthquakes, i.e. the uncertainty of earthquakes. This paper presents results of probabilistic seismic hazard assessment(PSHA) of an actual caisson-type breakwater, considering uncertainties of earthquake occurrences and soil properties. First, the seismic vulnerability of a structure and the seismic hazard of the site are evaluated, using earthquake sets and a seismic hazard map; then, the seismic risk of the structure is assessed.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.193-201
• /
• 2003

The problem of brake judder is typically caused by defects of quality manufacturing. DFSS (Design for six sigma) is a design process for quality improvement. DFSS will result in more improved but less expensive quality products. This paper presents an implementation of DFSS for quality improvement of the brake judder of heavy-duty trucks. Carrying out 5 steps of DFSS, the major reasons for defects of quality are found. The numerical approximation of the brake system is derived by means of the response surface method. Its quality for brake judder is improved by using the sigma based robust design methodology. Results are compared between the conventional deterministic optimal design and the proposed sigma based robust design. The proposed one shows that manufacturing cost may increase as the quality level increase. The proposed one, however, is more economical in aspect of the overall cost since the probability of failure dramatically goes down.

• 한국정보처리학회논문지
• /
• 제7권9호
• /
• pp.2913-2919
• /
• 2000

비대칭 암호 알고리즘을 설계하는 데 있어서 매우 큰 소수를 구하는 것은 필수적이다. 그러나 지금까지는 결정론적인(deterministic) 큰 소수를 발견하기는 매우 어려웠기 때문에, 일반적으로 확률적으로 소수일 가능성이 높은 의사소수(psedoprime)를 비대칭 암호 알고리즘에서 사용하였다. 이 논문에서 결정론적인 소수 생성 방법을 제안하며, 제안된 방법에 의해 생성된 소수는 증명이 가능한 100% 정확한 소수이다. 또한 이 방법에 의해 생성된 소수는 신뢰성, 비도, 원시원소(primitive element)생성 능력 등을 보장한다.