• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.5
• /
• pp.94-100
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of detect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But, in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion own. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.451-458
• /
• 2007

A preliminary design approach for superyachts is introduced. The state-of-the-arts of superyachts is investigated and their characteristics are indirectly examined by analyzing the data collected from built vessels. The analysis of data provides a guideline for the establishment of an preliminary hull form of a superyacht. The rules and regulations governing the design and construction of superyachts are collected and considered. A modeling approach for prompt and efficient design is also introduced. A sample hull form of a selected superyacht is constructed using commercial design packages not only to produce a hull form but to analyze the hydrostatic and hydrodynamic performances of the constructed vessel. Various visualization techniques are considered as an efficient tool for design verification.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2574-2576
• /
• 2009

In this work, we describe a new sensor that specifically responds to biothiols, i.e., glutathione (GSH), in solution. An electrochemical transducing strategy was utilized and cyclic voltammetry (CV) was employed to monitor the presence of GSH in real time. Our approach harnessed self-assembled monolayers (SAMs) on gold consisting of an alkanethiolate which was terminated by electroactive quininoid moiety. Prior to thiol molecule treatment, the characterisitc reversible redox peaks of the electroactive quininoid group was observed, while the reduction peak was dramatically shifted upon a treatment of GSH. This sensor showed the capability to detect the GSH in solution in the range of 1 mM $\sim$ 100 aM. We believe that this strategy will provide an important tool for accurate, sensitive, rapid, and low-cost determination of GSH.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1819-1824
• /
• 2006

The general objective of the present study was to investigate the potential application of the UV spectroscopic method for determination of the polymeric additives present in papermaking fibrous stock solutions. The study also intended to establish the surface-chemical retention model associated with the adsorption kinetics of additives on fiber surfaces. Polyamide epichlorohydrin (PAE) wet strength resin and imidazolinium quaternary (IZQ) softening agents were selected to evaluate the analytical method. Concentrations of PAE and IZQ in solution were proportional to the UV absorption at 314 and 400 nm, respectively. The time-dependent behavior of polymeric additives obeyed a mono-molecular layer adsorption as characterized in Langmuir-type expression. The kinetic modeling for polymeric adsorption on fiber surfaces was based on a concept that polymeric adsorption on fiber surfaces has two distinguishable stages including initial dynamic adsorption phase and the final near-equilibrium state. The simulation model predicted not only the real-time additive adsorption behavior for polymeric additives at high accuracy once the kinetic parameters were determined, but showed a good agreement with the experimental data. The spectroscopic method examined on the PAE and IZQ adsorption study could potentially be considered as an effective tool for the wet-end retention control as applied to the paper industry.

• Structural Engineering and Mechanics
• /
• v.38 no.2
• /
• pp.171-193
• /
• 2011

One of the possible alternatives of simulation-based time-dependent reliability assessment of pre-stressed biconcave and biconvex cable trusses, the Monte Carlo method, is applied in this paper. The influence of an excessive deflection of cable truss (caused by creep of cables and rheologic changes) on its time-dependent serviceability is investigated. Attention is given to the definition of the basic random variables and their statistical functions (basic, mutually dependent random variables such as the pre-stressing forces of the bottom and top cable, structural geometry, the Young's modulus of elasticity of the cables, and the independent variables, such as permanent load, wind, snow and thermal actions). Then, the determination of the response of the cable truss to the loading effects, and the definition of the limiting values considering serviceability of the structure are performed. The potential of the method, using direct Monte Carlo technique for simulation-based time-dependent reliability assessment as a powerful tool, is emphasized. Results obtained by the First order reliability method (FORM) are compared with those obtained by the Monte Carlo simulation technique.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.424-432
• /
• 1989

A mathematical model is developed for determination of the dynamic cutting force from static cutting data. The dynamic cutting force is analytically expressed by the static cutting coefficient and the dynamic cutting coefficient which can be determined from the cutting mechanics. The proposed model is verified by the chatter stability charts. A good agreement was shown between the stability limits predicted by the theory and the critical width of cut determined by experiments. The static cutting coefficient dominates high speed chatter stability, while the dynamic cutting coefficient dominates low speed chatter stability.

• Earthquakes and Structures
• /
• v.13 no.1
• /
• pp.79-87
• /
• 2017

Seismic analysis of local site conditions is fundamental for a reliable site seismic hazard assessment. It plays a major role in mitigation of seismic damage potential through the prediction of surface ground motion in terms of amplitude, frequency content and duration. Such analysis requires the determination of the transfer function, which is a simple tool for characterizing a soil profile by estimating its vibration frequencies and its amplification potential. In this study, numerical simulations are carried out and are then combined with a statistical study to allow the characterization of design sites classified by the Algerian Building Seismic Code (RPA99, ver 2003), by average transfer functions. The mean transfer functions are thereafter used to compute RPA99 average site factors. In this regard, coming up seismic fields are simulated based on Power Spectral Density Functions (PSDF) defined at the rock basement. Results are also used to compute average site factor where, actual and synthetic time histories are introduced. In absence of measurement data, it is found that the proposed approach can be used for a better soil characterization.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.1
• /
• pp.21-31
• /
• 2003

Determination of operational dimensions and tolerances is complex if there exist inconsistencies between operational and design specifications. Dimension and tolerance charts (D&T charts) have been used to establish the relationships among operational dimensions in complex machining. This chart proves that individual operations can be harmonized when they are interconnected. However, it is hard to generate the chart manually. Because operational dimensions and tolerances must meet the design specifications, the dimensions and tolerances of interconnected operations have to be verified serially for economical operations. In this paper, the chart is automatically generated from the interconnected operations. More importantly, all operational dimensions and tolerances displayed in the chart have been verified by using LP to meet the design specifications. Finally, the chart is converted to an operational routing sheet that contains a detailed process plan along with cutting speed, feed rate, and operational references based on material hardness, surface finish, and tool nose radius.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.272-277
• /
• 2011

LBS(Location Based Service) is one of the most important killer App. in the Smart-phone Era. The Smart-phone provide basically location informations using GPS, Wi-Fi AP, 3G ID as a location determination technology to supply LBS. Also it can use maps such as Google map and Daum map with Open API. Therefore, Smart-phone is regarded as the best platform to develop location based applications. In my paper, a location based smart-phone App., that is, "Real-Race App." is designed and implemented for applying events and marketing.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.53-56
• /
• 2006

KOMPSAT (KOrea Multi-Purpose SATellite)-5 for the earth observation and scientific research is scheduled to launch in 2009. The second payload, AOPOD (Atmosphere Occultation and Precision Orbit Determination) system, consists of a space-borne dual frequency GPS receiver and a laser retro reflector. GPS radio occultations from AOPOD system can be used to generate profiles of refractivity, temperature, pressure and water vapor in the neutral atmosphere with a high vertical resolution. Also the radio occultation in the ionosphere provides an inexpensive tool of vertical electron density profile. Currently, many LEO missions with GPS radio occultation receivers are on orbit and more GPS occultation missions are planed to launch in the near future. In this paper, we simulated radio occultation measurements from KOMPSAT-5 and retrieved atmospheric profiles using the simulated data.