• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.29-37
• /
• 2020

Conventional firewalls cannot cope with attacks immediately. It is because security professionals or administrators need to analyze them and enter relevant policies to the firewalls. In addition, those policies may often block even normal accesses. Even though the packet themselves are normal, there exist many attacks that cause denial of service due to the inflow of a large amount of those packets. In this paper, we propose a method to block attacks such as Flooding, Spoofing and Scanning while allowing normal accesses based on whitelist policies which are automatedly generated by learning normal access patterns.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.255-260
• /
• 2014

A portable clip-type pulsimeter equipped with a magnetic sensing Hall device has been developed to raise the accuracy of oriental disease diagnosis and therapy by convergence of magnetism and oriental medicine. To improve accuracy and reliability of conventional pulsimeter due to subjective analysis of the pulse wave and measuring position dependency of the arterial pulse sensor, the fuzzy algorithm was applied to analyze the strong- and weak-pulse wave symptom. Optimal time for electronic acupuncture was calculated using fuzzy rules and interference were drawn from objective data in view of pre-treatment. Moreover, the electrical characteristics of the pain parts that respond to acupuncture point were applied in view of post-treatment to propose the scientific pulse wave algorithm and simulation experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1229-1234
• /
• 2008

In this work, ultra high-voltage (17 - 50 kV AC), reliable 80 pF mica capacitors for partial discharge system application were investigated. Mica was used as the dielectric of the capacitors. Using the conservative design rule, over 3 individual $50\;{\mu}m$ thick mica sheets with a size of 30mm{\times}35mm were used with lead foils to form a parallel capacitor element and 20 mica sheets were interleaved with lead foils to form a series stack of parallel capacitor element to meet the requirements of the capacitors. The dimensions of the fabricated 80 pF capacitors for 17 kV AC and 50 kV AC were $90\;mm{\times}90\;mm$ and $95\;mm{\times}180\;mm$, respectively. The high-frequency characteristics of the capacitance (C) and dissipation factor (D) of the developed capacitors were measured using a capacitance meter. The developed capacitors exhibited C of 79.5 - 87.5 pF, had D of 0.001% over the frequency ranges of 150 kHz to 50 MHz, had a self-resonant frequency of 65 MHz, and showed results comparable to those measured for the capacitors prepared recently by $Adwel^{Tm}$. The developed capacitors also showed excellent characteristics for thermal shock test and temperature cycling test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.1020-1029
• /
• 2008

This paper proposes an high speed pattern matching algorithm and its implementation. The pattern matcher is used to check patterns from realtime input packet. The proposed algorithm can find exact string, range of string values, and combination of string values from input packet at high speed. Given string and rule set are modelled as a state transition graph which can find overlapped strings simultaneously, and the state transition graph is partitioned according to input implicants to reduce implementation complexity. The pattern matcher scheme uses the transformed state transition graph and input packet as an input. The pattern matcher was modelled and implemented in VHDL language. Experimental results show the proprieties of the proposed approach.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.179-189
• /
• 2006

Recently, according to the development of computer technology, a large amount of customer data have been stored in database. Using such data, decision makers extract the useful information to make a valuable plan with data mining. In this paper, we design a forecasting model that classifies the exiting customers in the telecommunication industries using the classification rule, one of the data mining technologies. In other words, this paper builds a model of customer loyalty detection and analyzes customer patterns in mobile communication service market with data mining using neural network and regression methods. This model improves the relationship of customers and enterprises. As a result, the enterprise creates the profits from many customers and the customer receives more benefits from the enterprise.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1023-1041
• /
• 2010

In cognitive radio networks, cooperative spectrum sensing schemes are proposed to improve the performance of detecting licensees by secondary users. Commonly, the cooperative sensing can be realized by means of hard decision fusion (HDF) or soft decision fusion (SDF) schemes. The SDF schemes are superior to the HDF ones in terms of the detection performance whereas the HDF schemes are outperforming the SDF ones when the traffic overhead is taken into account. In this paper, a hybrid SFD-HDF cluster-based approach is developed to jointly exploit the advantages of SFD and HDF schemes. Different SDF schemes have been proposed and compared within a given cluster whereas the OR-rule base HDF scheme is applied to combine the decisions reported by cluster headers to a common receiver or base station. The computer simulations show promising results as the performance of the proposed scenario of hybridizing soft and hard fusion schemes is significantly outperforming other different combinations of conventional SDF and HDF schemes while it noticeably reduces the network traffic overhead.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1145-1153
• /
• 2015

The paper analyzes reactive power flow characteristic in power system by reactive power tracing. In addition, virtual buses are inserted in the algorithm to consider losses of transmission lines, and shunt capacitor treated as a reactive power generator. The results of simulation are analyzed by two points of view. The one is load’s point of view and another is generator’s point of view. Classic purpose of the reactive power tracing consists in the reactive power pricing. However, it is significantly used to select vulnerable area about line outage in this paper. To find the vulnerable area, reactive power tracing variations between pre-contingency and post-contingency are calculated at all load buses. In heavily load area, buses which has highest variation become the most vulnerable bus. This method is applied to the IEEE 39-bus system. It is compared with voltage variation result and VQ-margin to verify its effect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.2
• /
• pp.174-182
• /
• 2013

Most methods for fusion-based finger vein recognition were to fuse different features or matching scores from more than one trait to improve performance. To overcome the shortcomings of "the curse of dimensionality" and additional running time in feature extraction, in this paper, we propose a finger vein recognition technology based on matching score-level fusion of a single trait. To enhance the quality of finger vein image, the contrast-limited adaptive histogram equalization (CLAHE) method is utilized and it improves the local contrast of normalized image after ROI detection. Gabor features are then extracted from eight channels based on a bank of Gabor filters. Instead of using the features for the recognition directly, we analyze the contributions of Gabor feature from each channel and apply a weighted matching score-level fusion rule to get the final matching score, which will be used for the last recognition. Experimental results demonstrate the CLAHE method is effective to enhance the finger vein image quality and the proposed matching score-level fusion shows better recognition performance.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.595-604
• /
• 2011

A three-phase three-level shunt active filter controlled by fuzzy logic current controller which can compensate current harmonics generated by nonlinear loads is presented. Three-level inverters and fuzzy controllers have been successfully employed in several power electronic applications these past years. To improve the conventional pwm controller performance, a new control scheme based on fuzzy current controller is adopted for three-level (NPC) shunt active filter. The scheme is designed to improve compensation capability of APF by adjusting the current error using a fuzzy rule. The inverter current reference signals required to compensate harmonic currents use the synchronous reference detection method. This technique is easy to implement and achieves good results. To maintain the dc voltage across capacitor constant and reduce inverter losses, a proportional integral voltage controller is used. The simulation of global system control and power circuits is performed using Matlab-Simulink and SimPowerSystem toolbox. The results obtained in transient and steady states under various operating conditions show the effectiveness of the proposed shunt active filter based on fuzzy current controller compared to the conventional scheme.

• Journal of Intelligence and Information Systems
• /
• v.6 no.1
• /
• pp.73-82
• /
• 2000

This study examined the characteristicso f the knowledge discovery and data mining algorithms to demonstrate how they can be used to predict health outcomes and provide policy information for hypertension management using the Korea Medical Insurance Corporation database. Specifically this study validated the predictive power of data mining algorithms by comparing the performance of logistic regression and two decision tree algorithms CHAID (Chi-squared Automatic Interaction Detection) and C5.0 (a variant of C4.5) since logistic regression has assumed a major position in the healthcare field as a method for predicting or classifying health outcomes based on the specific characteristics of each individual case. This comparison was performed using the test set of 4,588 beneficiaries and the training set of 13,689 beneficiaries that were used to develop the models. On the contrary to the previous study CHAID algorithm performed better than logistic regression in predicting hypertension but C5.0 had the lowest predictive power. In addition CHAID algorithm and association rule also provided the segment characteristics for the risk factors that may be used in developing hypertension management programs. This showed that data mining approach can be a useful analytic tool for predicting and classifying health outcomes data.