• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.233-238
• /
• 1997

We have investigated gas-detection characteristics of CuTBP (Copper-tetra-tert-butylphthalocyanine) chemiresistor devices exposed to air/200ppm N $O_{2}$ gases. The CuTBP films were made by Langmuir-Blodgett (LB) techniques. Sensitivity, response time, recovery time, and reproducibility of the devices were measured by current voltage characteristics. Interdigital electrode was used to improve the sensitivity. It was observed that a conductance G increases monotonically as the number of interdigital electrode finger pairs increases. As the number of interdigital electrode finger pairs increases, the sensitivity S( $G_{gas}$/ $G_{air}$) increases more than 50 times and stable. But the response time was delayed. The average recovery time of the CuTBP chemiresistor devices turned out to be about 100 second. We have also investigated applicability of the CuTBP chemiresistor device for a gas sensor.sor.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1660-1669
• /
• 2014

Partial discharge (PD) detection plays a major role in the life time assessment of liquid insulation in power transformers. Many research works are being carried out to replace conventional mineral oil insulation in transformers by vegetable oils. It is necessary to understand the PD characteristics of vegetable oils before recommending them as an alternate for mineral oil. In this paper, the breakdown strength and PD characteristics of palm and corn oil were investigated in both unaged and thermally aged conditions. Laboratory experiments were performed as per IEC test procedures. PD signals were measured using wide band detection system. Phase resolved PD pattern of vegetable oils and mineral oil were compared. Effect of increase in voltage stress on the PD pattern of palm and corn oil were studied. Time and frequency domain analysis of PD pulses at needle-plane electrode configuration was carried out. Statistical analysis of PD pattern i.e. skewness and shape parameter variations with respect to applied thermal stress were also carried out. From the results, it is observed that palm and corn oils have better breakdown strength and PD characteristics even under long-term thermal stress and hence they can be used for power transformer applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5006-5022
• /
• 2017

Effect and robust detection of targets in infrared images has crucial meaning for many applications, such as infrared guidance, early warning, and video surveillance. However, it is not an easy task due to the special characteristics of the infrared images, in which the background clutters are severe and the targets are weak. The recent literature demonstrates that sparse representation can help handle the detection problem, however, the detection performance should be improved. To this end, in this text, a hybrid method based on local sparse representation and contrast is proposed, which can effectively and robustly detect the infrared targets. First, a residual image is calculated based on local sparse representation for the original image, in which the target can be effectively highlighted. Then, a local contrast based method is adopted to compute the target prediction image, in which the background clutters can be highly suppressed. Subsequently, the residual image and the target prediction image are combined together adaptively so as to accurately and robustly locate the targets. Based on a set of comprehensive experiments, our algorithm has demonstrated better performance than other existing alternatives.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.4
• /
• pp.230-234
• /
• 2014

Automatic detection of disease helps medical institutions that are introducing digital images to read images rapidly and accurately, and is thus applicable to lesion diagnosis and treatment. The aim of this study was to apply a symmetry contribution algorithm to unsharp mask filter-applied MR images and propose an analysis technique to automatically recognize brain tumor and edema. We extracted the skull region and drawed outline of the skull in database of images obtained at P University Hospital and detected an axis of symmetry with cerebral characteristics. A symmetry contribution algorithm was then applied to the images around the axis of symmetry to observe intensity changes in pixels and detect disease areas. When we did not use the unsharp mask filter, a brain tumor was detected in 60 of a total of 95 MR images. The disease detection rate for the brain was 63.16%. However, when we used the unsharp mask filter, the tumor was detected in 87 of a total of 95 MR images, with a disease detection rate of 91.58%. When the unsharp mask filter was used in the pre-process stage, the disease detection rate for the brain was higher than when it was not used. We confirmed that unsharp mask filter can be used to rapidly and accurately to read many MR images stored in a database.

• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.280-285
• /
• 2008

The traditional face detection method is to use difference picture method are used to detect movement. However, most do not consider this mathematical approach using real-time or real-time implementation of the algorithm is complicated, not easy. This paper, the first to detect real-time facial image is converted YCbCr and RGB video input. Next, you convert the difference between video images of two adjacent to obtain and then to conduct Glassfire Labeling. Labeling value compared to the threshold behavior Area recognizes and converts video extracts. Actions to convert video to conduct face detection, and detection of facial characteristics required for the extraction and use of AdaBoost algorithm.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.3
• /
• pp.185-192
• /
• 2015

Since real-time monitoring systems, such as early fault detection, have been very important, an infrared thermography technique was proposed as a new diagnosis method. This study focused on damage detection and temperature characteristic analysis of ball bearings using the non-destructive, infrared thermography method. In this paper, for the reliability assessment, infrared experimental data were compared with finite element analysis (FEA) results from ANSYS. In this investigation, the temperature characteristics of ball bearing were analyzed under various loading conditions. Finally, it was confirmed that the infrared thermography technique was useful for the real-time detection of damage to bearings.

• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.557-566
• /
• 2016

Heart sounds generated by the beating heart and blood flow reflect the turbulence created when the heart valves snap shut. Cardiac diagnosis is typically started by an auscultation using a stethoscope, from which a medical doctor, depending on his hearing capabilities and training, listens and interprets the acoustic signal. This method of diagnostic is uncertain, mostly due to the fact that human ear loses the acoustic frequency sensitivity through the years. Even though an auscultation has some weaknesses like uncertainty, it is considered as a primary tool due to its simplicity. In this paper, heart murmur detection algorithm is proposed using time and frequency characteristics of heart sound. The propose heart murmur detection method adapted conventional primary heart sound detection method in time domain and modified spectral flatness method in frequency domain for detecting heart murmurs. From experimental results, it is confirmed that the proposed algorithm detect the heart murmurs efficiently.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.716-718
• /
• 2004

The false alarm data in intrusion detection systems are divided into false positive and false negative. The false positive makes bad effects on the performance of intrusion detection system. And the false negative makes bad effects on the efficiency of intrusion detection system. Recently, the most of works have been studied the data mining technique for analysis of alert data. However, the false alarm data not only increase data volume but also change patterns of alert data along the time line. Therefore, we need a tool that can analyze patterns that change characteristics when we look for new patterns. In this paper, we focus on the false positives and present a framework for analysis of false alarm pattern from the alert data. In this work, we also apply incremental data mining techniques to analyze patterns of false alarms among alert data that are incremental over the time. Finally, we achieved flexibility by using dynamic support threshold, because the volume of alert data as well as included false alarms increases irregular.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.929-931
• /
• 2015

As the digital image processing technology develops, the edge in the image is widely utilized in various fields such as the object recognition and detection. Most of the current methods to detect the edge use the fixed weighting mask of Sobel or Roberts. Such current methods have an advantage that the implementation is simple but have a disadvantage that the characteristics of the edge detection are more or less insufficient. Thus, an algorithm using the modified morphology is proposed in order to supplement such problems of the current edge detection methods and obtain the excellent edge detection, and also a simulation using this algorithm is conducted to compare with such current methods.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.330-335
• /
• 2013

Since real-time monitoring system like a fault early detection has been very important, infrared thermography technique as a new diagnosis method was proposed. This study is focused on the damage detection and temperature characteristic analysis of ball bearing using the non-destructive infrared thermography method. In this paper, for the reliability assessment, infrared experimental data were compared with the frequency data of the existing. As results, the temperature characteristics of ball bearing were analyzed under various loading conditions. Finally it was confirmed that the infrared technique was useful for real-time detection of the bearing damages.