• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.45-50
• /
• 2013

Recently, as the market for SMART TV expands, the camera is embedded for providing various user experience. However, this leads to occurrence of camera failure due to TV power up sequence problem, which are usually not detectable in conventional test equipments. Although the failure-detection can be possible by re-generating control signals for audio interface with new equipment, it is expensive and also requires much time to test. In this paper, for SMART TV, FPGA(Field Programmable Gate Array)-based failure-detection system is proposed which can lead to reduction of both cost and time for test.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.484-490
• /
• 2008

In this paper, an integrated fault section detection and isolation strategy is proposed based on the application of the Distribution Automation System(DAS) utilizing advanced IT and communication technologies. The Feeder Remote Terminal Unit(FRTU) has been widely used to collect data in the Korean distribution system. The achieved data is adopted in this method for detecting multiple fault types. Especially in the case of single phase-to-ground fault, the fault section is detected by comparison of the zero-sequence current phase angle. The test results have verified the effectiveness of the proposed method in a radial distribution system through extensive simulations in Matlab/Simulink. Furthermore, a communication-based demo system identical to the simulation model has been developed, and it can be applied as an online monitoring and control program for fault section detection and isolation.

• The KIPS Transactions:PartB
• /
• v.10B no.2
• /
• pp.127-134
• /
• 2003

This paper is intended to develop an algorithm for automatic detection of traffic accidents using image sequences. This algorithm is designed for detecting stopped vehicles traffic accidents, break down, illegal stop in the road shoulder - on the range of camera view. Virtual traps are set on accident-prone spots. We analyze the changes in gray levels of pixels on the virtual traps which represent the motion of vehicles on the corresponding spots. We verify the proposed algorithm by simulating some situations and checking if it detect them correctly.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.150-153
• /
• 2008

In the blind Maximum-likelihood (ML) detection for Orthogonal Space-Time Block Codes (OSTBC), the problem of ambiguity in determining the symbols has been a great concern. A possible solution to this problem is to apply semi-blind ML detection, i.e. the blind ML decoding with pilot symbols or training sequence. In order to increase the performance, the number of pilot symbols or length of training sequence should be increased. Unfortunately, this leads to a significantly decrease in system spectral efficiency. This work presents an approach to resolve the aforementioned issue by introducing a new method for constructing transmitted information symbols, in which transmitting information symbols drawn form different modulation constellations. Therefore, the ambiguity can be easily eliminated. In addition, computer simulation is implemented to verify the performance of the proposed approach.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.21-26
• /
• 2011

In this paper, we suggest the object-oriented methodology for the design and implementation scheme for the program development in the application of control and instrumentation such as the detection system of RFID defective tags which needs the embedded programming. We apply the design methodology of UML in the system design phase, and suggest the implementation scheme of LabVIEW programs using LVOOP(LabVIEW Object Oriented Programming)in which make it possible to write the object-oriented programming. We design the class diagram and the sequence diagram using UML, and write the classes of LVOOP from the designed class diagram and the main VI from the sequence diagram, respectively. We show that it is possible to develop the embedded programs such as the RFID application through the implementation example of the detection system of RFID defective tags in this paper. And, we obtain the advantages based on the object-oriented design and implementation using the LVOOP approach such as the development of LabVIEW programs by adding the classes and the concept of object of the object-oriented language to LabVIEW.

• Speech Sciences
• /
• v.10 no.1
• /
• pp.95-105
• /
• 2003

This paper describes a new parameter for voice activity detection which serves as a front-end part for automatic speech recognition systems. The new parameter called run-ratio is derived from the runs test statistic which is used in the statistical test for randomness of a given sequence. The run-ratio parameter has the property that the values of the parameter for the random sequence are about 1. To apply the run-ratio parameter into the voice activity detection method, it is assumed that the samples of an inputted audio signal should be converted to binary sequences of positive and negative values. Then, the silence region in the audio signal can be regarded as random sequences so that their values of the run-ratio would be about 1. The run-ratio for the voiced region has far lower values than 1 and for fricative sounds higher values than 1. Therefore, the parameter can discriminate speech signals from the background sounds by using the newly derived run-ratio parameter. The proposed voice activity detector outperformed the conventional energy-based detector in the sense of error mean and variance, small deviation from true speech boundaries, and low chance of missing real utterances

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1217-1228
• /
• 2014

A method for faulted line detection of four parallel lines on the same tower is presented, based on four-summing and double-differential sequences of one terminal current. Four-summing and double-differential sequences of fault current can be calculated using a certain transformation matrix for parameter decoupling of four parallel transmission lines. According to fault boundary conditions, the amplitude and phase characteristics of four-summing and double-differential sequences of fault current is studied under conditions of different types of fault. Through the analysis of the relationship of terminal current and fault current, a novel methodology for fault line detection of four parallel transmission line on the same tower is put forward, which can pick out the fault lines no matter the fault occurs in single line or cross double lines. Simulation results validate that the methodology is correct and reliable under conditions of different load currents, transient resistances and fault locations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2401-2406
• /
• 1999

Various techniques extracting feature vectors have been studied for the cut detection in compressed video data. In case of using the histogram of occurrence of pixel's values as a feature vector, the precise detection of cuts would not be expected because of not considering the spatial correlation of pixels. And more sophisticated algorithms such as CCV(Color Coherent Vector) and Correlrogram tend to be used. Though these methods can be able to detect cuts rather precisely, they require much more processing time because of a enormous amount of computations. In this paper we propose a method of the cut detection using spatial correlation of DC values of luminance components in MPEG video sequence. This requires less processing time and also It can increase the rates of detecting the correct cuts by using advanced comparative method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1690-1696
• /
• 1999

Video sequence should be hierachically classified for the content-based retrieval. Cut detection algorithm is an essential process to classify shots. It is generally difficult for cut detection algorithms to detect cut points since a current frame is compared with a previous one, because movement of camera or object made adrupt scene change. We reduce ratio of failed cut detection so that compare the difference between frames of predicted cut point and their neighbors. In this paper, first we get predicted cut point, then we judge that the predicted cut point is true point or not. And we extracted DC images in MPEG video sequence for comparison. As a result of experiments. We confirmed that the cut detection ratio of the proposed algorithm is higher than of any other algorithms.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.967-970
• /
• 2020

In a previous work we have done, we presented a monitoring system to automatically detect some dogs' behaviors from videos. However, the input video data used by that system was pre-trimmed to ensure it contained a dog only. In a real-life situation, the monitoring system would continuously receive video data, including frames that are empty and ones that contain people. In this paper, we propose a YOLOv4-based system for automatic object detection and trimming of dog videos. Sequences of frames trimmed from the video data received from the camera are analyzed to detect dogs and people frame by frame using a YOLOv4 model, and then records of the occurrences of dogs and people are generated. The records of each sequence are then analyzed through a rule-based decision tree to classify the sequence, forward it if it contains a dog only or ignore it otherwise. The results of the experiments on long untrimmed videos show that our proposed method manages an excellent detection performance reaching 0.97 in average of precision, recall and f-1 score at a detection rate of approximately 30 fps, guaranteeing with that real-time processing.