• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.413-421
• /
• 2012

In industry, various rotating machinery such as pumps, gas turbines, compressors, electric motors, generators are being used as an important facility. Due to the industrial development, they make high performance(high-speed, high-pressure). As a result, we need more intelligent and reliable machine condition diagnosis techniques. Diagnosis technique using hidden Markov-model is proposed for an accurate and predictable condition diagnosis of various rotating machines and also has overcame the speed limitation of time/frequency method by using compensation of the rotational speed of rotor. In addition, existing artificial intelligence method needs defect state data for fault detection. hidden Markov model can overcome this limitation by using normal state data alone to detect fault of rotational machinery. Vibration analysis of step-up gearbox for wind turbine was applied to the study to ensure the robustness of diagnostic performance about compensation of the rotational speed. To assure the performance of normal state alone method, hidden Markov model was applied to experimental torque measuring gearbox in this study.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.51.2-51.2
• /
• 2017

Diffuse radio relics are often detected in merging galaxy clusters and are emitted by synchrotron process. Radio relics are believed to trace the shock waves in the intracluster medium induced by ram pressure during a major cluster merger. Radio halos and relics are found in approximately 50 galaxy clusters to date that are all in a state of merging. The rarest of these galaxy clusters contain pairs of relics of similar brightness as well as a radio halo. The massive galaxy cluster PLCKG287.0+32.9 belongs to this rare population and is the second most significant detection from the Planck SZ All-sky Survey. Perhaps even more intriguing is that the radio relics are observed at vastly different distances from the X-ray peak requiring a complex merging scenario. In this study, we use weak-lensing to peer deeper into the merging scenario by reconstructing the dark matter distribution. We relate the mass distribution to the radio, X-ray, and optical emissions to provide constraints for future simulations of the merger. Fitting an NFW profile to the tangential shear we infer the mass of the cluster and discuss its implications for the merging scenario.

• 전자공학회논문지 IE
• /
• v.49 no.1
• /
• pp.7-11
• /
• 2012

In this paper, evaluation of physical properties about dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of phospolipid monomolecular DMPC using pressure stimulus. As a result, It is found that the phospolipid monolayer of dielectric relaxation takes a little time and depend on the molecular area. When electric bias is applied across the manufactured MIM device by the deposition condition of phospolipid monomolecular, it is found that be characteristic of insulation generated it wasn't breakdown when the higher electric field to impress by increase of deposition layers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.398-405
• /
• 2003

A fast response analyzer for measuring carbon dioxide concentration has been developed for transient characteristic and researches tested on internal combustion engine. The analyzer uses the well known NDIR(Non-Dispersive Infrared) method with miniaturized detection system, giving a time constant of approximately 30 microsecond, and sampling module consists of capillary tube. Since the transit time and the time constant of the sampling system depend on the sampling conditions, it is necessary to investigate the characteristics of sampling system before applied to exhaust gas measurement in engine. A unique method was designed to study the influence of the diameter of transfer sample line and operating conditions of the FRNDIR on transit time and time constant. A database of transit time and time constant was built up for different measured and simulated pressure conditions. The database can be used for correcting eventual $CO_2$ concentration measurement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1287-1294
• /
• 2003

The wear process of end mill is so complicated process that a more reliable technique is required for the monitoring and controlling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for 4 cases using the high-speed-steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. As the cutter impacts the workpiece surface, a situation of farced vibration arises in which the dominant forcing frequency is equal to the tooth passing frequency of the cutter. The tooth passing frequency appears as a harmonics form, and end mill flank wear is related with the first harmonic. It is possible to detect end . mill flank wear. This paper proposed the new method of the end mill wear detection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.40-40
• /
• 2010

사중극 질량 분석기(Quadrupole Mass Spectrometer, QMS)는 높은 정확도와 사용이 쉬운 장점으로 인해 반도체 및 디스플레이 산업 등의 진공공정에서 잔류가스를 측정하고 분석하는 기기로써 반도체 및 디스플레이 소자제조를 위한 공정 진단에서 많이 사용되고 있다. 특히 고진공으로 내려가면서 리크 디텍션(leak detection)과 미세 량의 잔류기체 감지가 더욱더 요구되며 특히 $H_2$ 및 CO의 경우 측정에 많은 어려움이 있다. 따라서 $H_2$ 및 CO의 미세 량을 감지하기 위하여 QMS의 성능을 평가할 수 있는 parameter 중 하나가 될 수 있는 minimum detectable partial pressure(MDPP)를 측정하였다. 실제 고진공에 도달하여 MDPP를 계산하기 위해서는 bake out이 필요하며 또한 가스가 주입되지 않은 상태에서 잔류기체의 조성을 정확히 알 수 없기 때문에 정량적 분석이 어렵다는 단점이 있다. 본 실험에서는 측정하고자 하는 물질의 소량 포함된 표준가스를 사용하여 부피확장방법으로 가스 챔버로 희석하여 이동시키고 핀홀에서 가스유량을 더 줄여서 QMS가 기체를 감지하는 압력범위를 유지하면서 가스를 인가하여 주어 그때의 MDPP를 계산하였다. 또한 tuning을 통해 이온전류를 증폭시켜 더 향상된 MDPP를 측정하였다. 이 방법을 사용하면 bake out을 통한 고진공에 도달하지 않고서도 MDPP를 측정할 수 있으며, 정확한 조성 및 부분압을 알 수 있고 또한 희석된 가스를 사용하여 MDPP를 더욱 더 향상시킬 수 있다.

• Clinical and Experimental Pediatrics
• /
• v.48 no.2
• /
• pp.216-220
• /
• 2005

Pulmonary arteriovenous fistulas(PAVFs) is a rare disorder that occurs in two to three children per 100,000 population. It is presented as absence of intervening capillary beds between the pulmonary artery and vein with resultant persistent right to left shunt. Other causes include trauma, liver cirrhosis, malignancy and schistosomiasis. It is mostly asymptomatic, but it may present with respiratory difficulty, cyanosis, clubbed fingers induced by right to left shunt or hemoptysis, polycythemia and epistaxis. Major complications, such as brain abscess, brain embolism, paradoxical embolism and subacute infective endocarditis can be devastating, so therapeutic intervention is recommended in all patients. However, removal of low-resistance fistulas can aggrevate pulmonary hypertension, so detection of increased pulmonary pressure is important. We report two patients : One a 42 year-old male with PAVFs treated with coil embolization, and a 42 year-old female who was treated with anticoagulants due to pulmonary hypertension.

• Biomolecules & Therapeutics
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2011

G-protein coupled receptors (GPCRs) constitute an important class of drug targets and are involved in every aspect of human physiology including sleep regulation, blood pressure, mood, food intake, perception of pain, control of cancer growth, and immune response. Radiometric assays have been the classic method used during the search for potential therapeutics acting at various GPCRs for most GPCR-based drug discovery research programs. An increasing number of diverse small molecules, together with novel GPCR targets identified from genomics efforts, necessitates the use of high-throughput assays with a good sensitivity and specificity. Currently, a wide array of high-throughput tools for research on GPCRs is available and can be used to study receptor-ligand interaction, receptor driven functional response, receptor-receptor interaction,and receptor internalization. Many of the assay technologies are based on luminescence or fluorescence and can be easily applied in cell based models to reduce gaps between in vitro and in vivo studies for drug discovery processes. Especially, cell based models for GPCR can be efficiently employed to deconvolute the integrated information concerning the ligand-receptor-function axis obtained from label-free detection technology. This review covers various platform technologies used for the research of GPCRs, concentrating on the principal, non-radiometric homogeneous assay technologies. As current technology is rapidly advancing, the combination of probe chemistry, optical instruments, and GPCR biology will provide us with many new technologies to apply in the future.

• Natural Product Sciences
• /
• v.24 no.1
• /
• pp.36-39
• /
• 2018

Phytochemical analysis of Boehmeria nivea (Bn) leaves by medium pressure liquid chromatography led to the isolation of a flavonoid glycoside identified by spectroscopic analysis as rutin. The amount of rutin in the leaves of Bn harvested from nine regions in South Korea (Bn 1-9) which were collected on the months of June, July, August, and September was determined by HPLC-UV analysis. A gradient elution program that utilizes a $Discovery^{(R)}$ C18 ($4.6{\times}250mm$, $5{\mu}m$) column and mobile phase composed of 1% acetic acid-water: acetonitrile (90:10 to 60:40 for min) was followed. The injection volume and flow rate were $10{\mu}l$ and 1 mL/ min, respectively. UV detection was set at 350 nm. Results show that Bn-8 harvested in September reported the highest content of rutin among the samples analyzed. This study provides a basis for the optimal harvest time of Bn which maximizes the yield of rutin.

• Korean Journal of Food Science and Technology
• /
• v.17 no.4
• /
• pp.295-303
• /
• 1985

Aflatoxin $B_1$, $B_2$, $G_1$, and $G_2$were quantitatively detected by the high pressure liquid chromatography on a Micropak-CN column, with Hexane-THF-IPA-water, using a Lichrosorbpacked flowceil in the fluorometric detector. Under those conditions, the minimum detectable amount of aflatoxin $B_1$ was 0.2 ng. HPLC was used in determining amount of aflatoxins in the commercially manufactured soybean food and home-made Meju. Aflatoxin producing abilities of strains used in the industrially fermented soybean food were also studied with the HPLC technique. Although aflatoxin-like substances were detected in a few samples on TLC, they were not identified with the HPLC retention times of standard aflatoxins. The commercial fungal strains used in Korea had no aflatoxin producing abilities.