• 한국태양에너지학회 논문집
• /
• 제21권3호
• /
• pp.43-50
• /
• 2001

A horizontal mantle heat exchanger for a thermosyphon-driven SDHW(solar domestic hot water) was numerically simulated and fluid flow and heat transfer in the annulus of the mantle heat exchanger were quantitatively investigated. The Reynolds number, the location of the inlet, and the gap of the annulus were selected as the important design variables. The effects of the design variables on the heat transfer characteristics were thoroughly studied. Based on the numerical results, a correlation for predicting the heat transfer coefficient was suggested as the conclusion of this study.

• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.80-88
• /
• 2017

Product data analytics (PDA) is a data-driven analysis method that uses product data management (PDM) databases as its operational data. It aims to understand and evaluate product development processes indirectly through the analysis of product data from the PDM databases. To educate and train PDA efficiently, this study proposed an approach that employs courses for both product development and PDA in a class. The participant group for product development provides a PDM database as a result of their product development activities, and the other group for PDA analyses the PDM database and provides analysis result to the product development group who can explain causes of the result. The collaboration between the two groups can enhance the efficiency of the education and training course on PDA. This study also includes an application example of the approach to a graduate class on PDA and discussion of its result.

• 한국게임학회 논문지
• /
• 제17권3호
• /
• pp.7-20
• /
• 2017

MMORPG users can create their own identity that they will use to act through in the virtual world utilizing the avatar creation system. The MMORPG customization process, divided into the creation and transformation stages, provides a sandbox for the identity play by users. In this study, analysis of the users' customization attitudes using the Q methodology especially in the transformation stage was conducted. The users' attitudes were found to be categorized into 4 types: 1) fulfilling attitude, 2) customization immersed attitude, 3) customization challenging attitude, and 4) community oriented attitude. Of particular interest are the immersed customization type, where the attitude is driven by the internal motivation of "self-satisfaction" unlike the fulfillment and community oriented attitudes which are driven by instrumental motivation of the avatar, and the continuous desire towards transformation revealed by the challenging customization attitude. This study provides valuable insight in the design perspective for developers in instilling critical immersion elements to the users while preparing to update the level.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.666-668
• /
• 1998

In this paper we illustrate the design of a node label data flow machine based on self-timed paradigm. Data flow machines differ from most other parallel architectures, they are based on the concept of the data-driven computation model instead of the program store computation model. Since the data-driven computation model provides the excution of instructions asynchronously, it is natural to implement a data flow machine using self timed circuits.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.111-121
• /
• 1997

본 연구에서는 선박설계/생산공정에 필요한 용접정보를 생성 지원하는 전산 시스템을 모델링하였다. 이를 위해 기존의 선박 용접정보의 특성과 흐름을 고찰, 분석하고, 전산 처리가 가능한 선박 용접정보 모델을 정의하였다. 모델링 기법으로는 효율적이고 유연한 시스템을 구축하기 위해 객체 지향 기법과 데이터베이스 기술을 접목시키고, Event-driven방식의 그래픽 사용자 인터페이스 기술을 동원하였다. 그리고, 테스트 프로그램을 개발하여 정의된 모델의 적합성과 그 구현 수단의 유효성을 확인, 검증하였다.

• 한국지능시스템학회논문지
• /
• 제9권5호
• /
• pp.480-489
• /
• 1999

Design and experimental results of yaw rate controller is described for electricallydriven four wheel vehicle without steering mechanism. Yaw rate controller has been known to be necessary to cope with nonlinear char-acteristics of the wheel/road conditions with respect to different road condition and steering angle. For an effective yaw rate control, a fuzzy PID gain scheduler is considered with changing control parameters. In order to apply proposed algorithm to the system a downsized four wheel drive electrically driven vehicle without steering mechanism was manufactured. With these techniques the proposed yaw rate controller is shown by experiment results to be obtained suficient performance in the whole steering regions.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.149-156
• /
• 2010

In this paper, the optimal design of a wind generator, implemented with the hybridized GA(Genetic Algorithm) and ES(Expert System), has been performed to maximize the AEP(Annual Energy Production) over the whole wind speed characterized by the statistical model of wind speed distribution. In particular, to solve the problem of calculation iterate, ES finds the superior individual and apply to initial generation of GA and it makes reduction of search domain. Meanwhile, for effective searching in reduced search domain, it propose Intelligent GA algorithm. Also, it shows the results of optimized model 500[kW] wind generator using hybridized algorithm and benchmark result of compare with GA.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.15-20
• /
• 2022

This paper is about elimination the situation in which gas sensor data becomes inaccurate due to temperature control when a semiconductor gas sensor is driven. Recently, interest in semiconductor gas sensors is high because semiconductor sensors can be driven with small and low power. Although semiconductor-type gas sensors have various advantages, there is a problem that they must operate at high temperatures. First temperature control was configured to adjust the temperature value of the heater mounted on the gas sensor. At that time, in controlling the heater temperature, gas sensor data are fluctuated despite supplying same gas concentration according to the temperature controlled. To resolve this problem, gas and temperature are extracted as a data. And then, a relation function is constructed between gas and temperature data. At this time, it is included low pass filter to get the stable data. In this paper, we can find optimal gain and parameters between gas and temperature data by using genetic algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1028-1032
• /
• 2004

In order to prevent machine tool feed slide system from transient vibrations during operations, machine tool designers usually adopt some typical design solutions; box-in-box typed feed slides, optimizing moving body for minimum weight and dynamic compliance, and so on. Despite all efforts for optimizing design, a feed drive system may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slides system. This paper presents a feed rate optimization of a ball screw driven machine tool feed slide system for its minimum vibration. Firstly, a ball screw feed drive system was mathematically modeled as a 6-degree-of-freedom lumped parameter system. Next, a feed rate optimization of the system was carried out for minimum vibrations. The main idea of the feed rate optimization is to find out the most appropriate smooth acceleration profile with jerk continuity. A genetic algorithm was used in this feed rate optimization

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.906-910
• /
• 2010

This paper describes the design and analysis of vibration driven cylindric electromagnetic energy harvester. The proposed harvester consists with spring, coil and rear earth magnet. The design utilizes an electromagnetic transducer and its operating principle is based on the relative movement of a magnet pole with respect to a coil. In order to optimal design and analysis, ANSYS FEA (Finite Elements Analysis) and Matlab model were used to predict the magnetic filed density with vibration and the generated maximum output power with load resistance. The system was designed for 6 Hz of natural frequency and spring constant was 39.48 N/m between 2 mm and 6 mm of displacement in moving magnet. When moving magnet of system was oscillated, each model was obtained that induced voltage in the coil was generated 2.275 Vpp, 2.334 Vpp and 2.384 Vpp, respectively. Then maximum output powers of system at load resistance ($1303{\Omega}$) were generated $124.2{\sim}132.2\;{\mu}W$ during magnets input displacement of 3 mm and 6 Hz periodic oscillation.