• Korean Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.244-252
• /
• 1997

In this paper, arm-type lifting mechanism which is attached under the frame of truck is analyzed. The three types of motions which are divided into rotation, pure lifting and automatic tilting motions are analyzed kinematically. These motions are visualized by computer graphics using Visual Basic. This program will be used for designer to demonstrate the arm-type lifting mechanism before making real machines. Also this program can change design parameter interactively.

• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.106-113
• /
• 2004

Recently, a new issue in designing spot welded structures such as automobile and train car bodies is to predict an economical fatigue design criterion. One of the most typical and traditional methods is to use a ΔP-N$\sub$f/ curve. However, since the fatigue data on the ΔP-N$\sub$f/ curve vary according to the welding conditions, materials, geometry of joint and fatigue loading conditions, it is necessary to perform the additional fatigue tests for determining a new fatigue design criterion of spot-welded lap joint having specific dimension and geometry. In this study, the stress distributions around spot welds of various spot welded lap joints such as in-plane bending type (IB type), tension shea. type (TS type) and cross tension type (CT type) were numerically analyzed. Using these results, the ΔP-N$\sub$f/ curves Previously obtained from the fatigue tests for each type were rearranged into the Δ$\sigma$-N$\sub$f/ relations with the maximum stresses at the nugget edge of the spot weld.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.115-118
• /
• 2002

This paper presents the design method and performance characteristics of a chip-type quadrature hybrid using LTCC-MLC technology. The design method for a chip-type quadrature hybrid is based on lumped element equivalent circuit of quarter-wave transformer. The chip-type quadrature hybrid was miniaturized to a greater extent using multilayer structure and lumped element. The proposed design method can also reduce the undesirable parasitic effects of the chip-type quadrature hybrid. The proposed chip-type quadrature hybrid was designed and fabricated using the proposed design method and the equivalent circuit model of a quarter-wave transformer. Fabrication and measurement of designed chip-type quadrature hybrid show much smaller size than a conventional distributed quadrature hybrid and a good agreement with simulated results.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.5-13
• /
• 2012

In this study, features and design effects of PV(Photovoltaic) modules were classified to help the installation of BIPV(Building Integrated Photovoltaic) In addition, through domestic and international trends and cases survey, installation method was organized and applicable range of efficiency and design from First-generation solar cells to the third-generation solar cell was classified. Frist, Crystalline Solar cell module of first-generation is appropriate for the wall type, roof, louver, shading and etc. It has superiority of technology and price stability and can be achieved by a variety of aesthetic effects. Second, Dye-Sensitized Solar Cell of Thin Film solar cell can express a variety of colors, adjust light transmittance and maximize the aesthetic splendor. It is appropriate for the wall type, window type, curtain wall type and etc. Also, see-through type solar cell can provide comforts cause of free flow of light. And it is advantageous from economic due to adjust the indoor temperature. It is appropriate for the atrium type, curtain wall type, window type and etc.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.116-126
• /
• 2016

In modern society which changes from quantity-seeking society to value-seeking one, people's various lifestyles have great effect on consumption patterns and work as an important factor in choosing hotels. The fact that design hotels, which provide unique experiences with differentiated and sensitive designs by reflecting various lifestyles, recently attract attention can be understood in the same context. As a matter of fact, design hotels recently serve as destinations as they become cultural and artistic icons which reflect customer lifestyles. Especially, the designs of lobby spaces in hotels play deciding role in customers' choices while representing the nature of hotels. In this respect, under the premise that the kinds of accumulated experiences are different depending on lifestyles and preferences for specific interior spaces are influenced by association mechanism formed by experiences, this study analyzed lobby spaces of design hotels which focus on specific lifestyles from the perspective of association mechanism based on experiences. As the method of analysis, this study classified the types of lifestyles and conducted case analysis to investigate what association mechanism works to enhance the preference of design hotels by types. Study classified lifestyles into experiential activity type, social meeting type, fashion-pursuing type and hideout-preferring type and analyzed cases of lobby designs in design hotels. The results of this case analysis are as follows; First, experiential activity type mainly utilized quasi-association and approach association through senses and social meeting type utilized quasi-association and memory association through emotions while fashion-pursuing type utilized quasi-association and presumption association through intuition and hideout-preferring type utilized quasi-association and approach association through thoughts. Second, it was found that most lobby designs are characterized by association mechanism in visual formative nature and that in temporal spatial nature working in complex way, and, through such process of association expansion, space stories are created. Stories of spaces created this way become unique identities of design hotels that provide new experiences for customers.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.31-43
• /
• 2021

In this study, approximate design optimization using various meta-models was performed for the structural design of active type deck support frame. The active type deck support frame was newly developed to facilitate both transportation and installation of 20,000 ton class offshore plant topside. Structural analysis was carried out using the finite element method to evaluate the strength performance of the active type deck support frame in its initial design stage. In the structural analysis, the strength performances were evaluated for various design load conditions that were regulated in ship classification organization. The approximate optimum design problem based on meta-model was formulated such that thickness sizing variables of main structure members were determined by achieving the minimum weight of the active type deck support frame subject to the strength performance constraints. The meta-models used in the approximate design optimization were response surface method, Kriging model, and Chebyshev orthogonal polynomials. The results from approximate design optimization were compared to actual non-approximate design optimization. The Chebyshev orthogonal polynomials among the meta-models used in the approximate design optimization represented the most pertinent optimum design results for the structure design of the active type deck support frame.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.63-70
• /
• 2007

Analogy in problem solving is similarity-based reasoning facilitated by verbal and visual operation. This similarity-based reasoning generally supports initial phase of idea search. Therefore, this study intends to infer the types of problem solving by tracing the analogy use of verbal and visual representation through a experimental research. According to the result of this research, the types of problem solving by analogy are classified into 'evolving', 'divergent', and 'poor conversion' type. Firstly, 'evolving type' is distinguished between 'combination type' associated different contents to develope a new design and 'transformation type' associated similar words and sketches to be continuously revised and developed. In these types usually structural analogy rather than surface analogy is used. Secondly, in 'divergent type' associated words or sketches are individually represented, and among them one design solution is selected. In this type usually surface analogy is used. Thirdly, in 'poor conversion type' interaction between verbal representation and visual representation does not go on smoothly, and the generation of idea is poor. In here surface analogy is mostly used. These findings could form the basis of skill development of idea generation and conversion in design education.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.566-573
• /
• 2017

A type certificate is required to ensure the safety of aircraft design. If a person is to pursue major design change to the certified aircraft, an applicant has to apply for a new type certificate, an amended type certificate, or a supplemental type certificate appropriately. Design changes to be applied for a supplemental type certificate are abstractly defined in ICAO, FAA, and EASA regulations. In this paper, authors reviewed certification procedures regarding design changes, analysed certification examples of leading countries, and presented the criteria to determine "major design changes not extensive" for a supplemental type certificate.

• Journal of The Korean Astronomical Society
• /
• v.46 no.3
• /
• pp.141-149
• /
• 2013

We analyze the spiral structure of 1725 nearby spiral galaxies with redshift less than 0.02. We use the color images provided by the Sloan Digital Sky Survey. We determine the arm classes (grand design, multiple-arm, flocculent) and the broad Hubble types (early, intermediate, late) as well as the bar types (SA, SAB, SB) by visual inspection. We find that flocculent galaxies are mostly of late Hubble type while multiple-arm galaxies are likely to be of early Hubble type. The fractional distribution of grand design galaxies is nearly constant along the Hubble type. The dependence of arm class on bar type is not as strong as that of the Hubble type. However, there is about a three times larger fraction of grand design spirals in SB galaxies than in SA galaxies, with nearly constant fractions of multiple-arm galaxies. However, if we consider the Hubble type and bar type together, grand design spirals are more frequent in early types than in late types for SA and SAB galaxies, while they are almost constant along the Hubble type for SB galaxies. There are clear correlations between spiral structures and the local background density: strongly barred, early-type, grand design spirals favor high-density regions, while non-barred, late-type, flocculent galaxies are likely to be found in low-density regions.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.232-239
• /
• 2015

Studies on the control of the inverted pendulum type system have been widely reported. This is because it is a typical complex nonlinear system and may be a good model for verifying the performance of a proposed control system. In this paper, we propose the design of some fuzzy logic control (FLC) systems for controlling a Segway-type mobile robot, which is an inverted pendulum type system. We first derive a dynamic model of the Segway-type mobile robot and then analyze it in detail. Next, we propose the design of some FLC systems that have good performance for the control of any nonlinear system. Then, we design two conventional FLC systems for the position and balance control of the Segway-type mobile robot, and we demonstrate their usefulness through simulations. Next, we point out the possibility of simplifying the design process and reducing the computational complexity,, which results from the skew symmetric property of the fuzzy control rule tables. Finally, we design two other FLC systems for position and balance control of the Segway-type mobile robot. These systems have only one input variable in the FLC systems. Furthermore, we observe that they offer similar control performance to that of the conventional two-input FLC systems.