• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.746-752
• /
• 2001

Design sensitivity analysis for nonlinear structural problems has been emerged in the last decade as a glowing area of engineering research. As a result, theoretical formulations and computational algorithms have already developed for design sensitivity of nonlinear structural problems. There is not enough research for practical nonlinear problems using multi-element, due to difficulties of implementation into FEA. Therefore, nonlinear response analysis for stiffened shell which consists of Mindlin plate and Timoshenko beam, was considered. Specially, it presents the backward-Euler method which is adopted to describe an exact yield state in the stress computation procedure. Then, design sensitivity analysis of nonlinear structures, particularly elasto-perfectly-plastic structure, is developed using direct differentiation method. The accuracy of the developed sensitivity analysis was compared with the central finite difference method. Finally, on the basis of above results, design improvement for stiffened shell is suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.180-187
• /
• 2003

In engineering design environment it is hard to link design data and systems because the types of them are disparate. Therefore, the importance of metadata has increased. Some researches have been executed to develop metadata. But they cannot interact with other metadata and are difficult to extend. The purpose of this paper is to develop a common document structure which represents the general information of mechanical part assembly using XML, and to use it as base documents in order to integrate design data and systems. It is composed of part, assembly and user documents. Part document represents the information of a part independently to part type. Assembly document represents the location of constituent part documents. User document represents user's information. Common documents can be used as a broker between design data and systems, and it can improve the interpretability and reusability of document. We applied the developed common document structure to 2-stage spur gear drive.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.97-104
• /
• 2006

The geometric configuration in the weight reduction designis very required to be started from the conceptual design with low cost, high performance and quality. In this point, a structural-topological shape concerned with conceptual design of structure is important. The method used in this paper combines three optimization techniques, where the shape and physical dimensions of the structure and material distribution are hierachically optimized, with the maximum rigidity of structure and lightweight. As the results, the technology of weight reduction design is considered in designs of aluminum control arm and inner panel of door.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2007

This study is on landscape design of existing rural village focused on for improvement of community. It's so one of serious problems in landscape in almost rural area of the nation. For the finding clue of landscape design of village view through this study, we surveyed 1 village located in Sangju city. By surveying landscape design factor of village, we can propose design method and a few results as follow; Firstly, the structure of village landscape has five principle factors. The five factors of landscape are history and culture, housing and building, nature, agriculture, and environment design. Secondly, color existing of housings is to contain a primary color on roof which is not in harmony. Nevertheless, we can also find the reform measure and the possibility because of the knowledge of village people.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.95-101
• /
• 1999

In this paper, we propose a dynamic model of an escalator which can be used to build a design database. The model permits to estimate the forces applied to the structure by calculating three primary types of forces; the torque required to operate the escalator, the reaction forces at part interconnection points, and contact forces between parts. These forces can then be used to calculate dynamic stresses in the structure which is required to estimate the durability of the structure. Result of the computer model are compared with testing results. This simulation model is used to construct a design database. So when we design a new escalator, this design database can be used to make a new simulation model which makes it possible for us to do a Knowledge-Based-Design.

• International Journal of Aerospace System Engineering
• /
• v.4 no.2
• /
• pp.1-4
• /
• 2017

This work dealt with design and manufacturing of WIG vehicle wing using carbon/epoxy composite materials. In this study, structural design and analysis of carbon composite structure for WIG craft were performed. Firstly, structural design requirement of wing for WIG vehicle was investigated. After structural design, the structural analysis of the wing was performed by the finite element analysis method. It was performed that the stress, displacement and buckling analysis at the applied load condition. And also, manufacturing of subscale wing using carbon/epoxy composite materials was carried out. After structural test of target structure, structural test results were compared with analysis results. Through the structural analysis and test, it was confirmed that the designed wing structure is safety.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.336-346
• /
• 2012

In this paper, a novel bearingless switched reluctance motor (BLSRM) with hybrid stator poles is proposed. The structure and operating principle are presented. In order to describe the design methodology clearly, analytical torque and radial force models are established. Further, basic design procedure is described. The numbers of phases and poles have important influence on the selection of structure. These effects, along with sizing of machine envelope and internal dimensions, make the machine design an insight-intensive effort. Effect of pole arcs and air-gap length on the production of torque and radial force are analyzed in detail. Mechanical design factors such as hoop stress and first critical speed are also considered. Based on the above analysis, the characteristics of the proposed BLSRM are analyzed. A prototype motor is designed and manufactured. The validity of the proposed structure is verified by the experimental results.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.359-364
• /
• 2002

In engineering design environment it is hard to link design data and system because the types of them are disparate. Therefore, the importance of metadata has increased. Some researches have been executed to develop metadata. But they cannot interact with other metadata and are difficult to extend. The purpose of this paper is to develop a common metadata structure which represents the general information of mechanical part assembly using XML, and to use it as base documents in order to integrate design data and systems. It is composed of part and assembly documents. Part document represents the information of a part independently to part type. Assembly document represents the location of part documents which compose an assembly. Common documents can be used as a broker between design data and systems and improve interpretability and reusability of document. We applied the developed common document structure to 2-stage spur gear drive.

• Journal of Aerospace System Engineering
• /
• v.13 no.4
• /
• pp.60-65
• /
• 2019

This study did a structural design of a fuel system of auxiliary fuel tank applied to aircraft then analyzed it. The safety of the structural design result was investigated. Aluminum alloy metal structure was applied to the fuel system structure. The structural analysis was conducted using commercial finite element software. The design requirement was maximum accelerate condition of the structure. Therefore, structural design was done considering the maximum accelerate condition.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1318-1323
• /
• 2009

In recent years, dramatic advances in information technology have motivated the construction industry to improve its productivity. Computer-based information technology includes Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), Computer-Aided Manufacturing (CAM), Enterprise Resource Planning (ERP), Digital Mock-Up (DMU) and Product Data Management (PDM). Most construction industries are trying to apply these technologies for quality improvement, reduction of construction time and cost. PDM is very useful for managing data and process related to product design and manufacturing. PDM system has various functions such as drawing and engineering document management, product structure and structure modification management, part classification management, workflow management, and project management. In this paper, PDM system was applied to the design of steel-concrete composite girder bridge. To make a practical guidance for PDM implementation to bridge design, the procedure for its implementation was presented. Consequently, this paper could be useful to enhance the efficiency of bridge design.