• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.253-272
• /
• 2015

Purpose: The purpose of this study is to enhance the reliability of quality inspection by standardize the fineness test method of the thermal insulator of military textiles Methods: We have measured the thermal insulator of military textiles by microscope with three different ways and the effectiveness of their difference were analyzed by one-way layout design. Results: We have suggest the standardized the fineness test method of the thermal insulator of military textiles through advanced research. As a result we have verified hollow ratio of heat insulating fiber affect fineness test methods. The fineness test method for the thermal insulator applied with different methods following hollow ratio. We have verified that when the hollow ratio over 90%, the fineness of the thermal insulator measured from fiber-length, if it has over 80%, the cross-section length of hollow and if it has less 80%, the cross-section area of hollow is applied, respectively. Conclusion: This study indicated that the test method of fineness shows high reliability. Heat insulating fibers which have high evenness shows narrow variations(5/% or less, only CV 25%) irrespectively under different testing equipment or institute. Based ons the results, we have suggest the standardization of test methods for fineness by microscope method and produced the registration of Group Standard in Korean Standards Association.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.461-470
• /
• 2009

This study has been prepared based on signboard arrangement works in order to foster Jeonju traditional Korean style house village as a main city of traditional culture. Overall composition has been suggested based on basic direction of signboard design in order to ensure design standardization method and utilization and right installation of various signboards. Enquete had been progressed by dividing into three areas including general characteristics of Korean style house village, acquisition of information and mobility and regulation/range of signboard with taking 600 number of persons from Jeonju citizens, outsiders and residents of Korean style house village as targets. Based on above result, design concept and detailed sign application method had been defined and pictogram and signboard installation method of Korean style house was suggested. As for the administrative procedure and regulations of signboard arrangement, cooperative method among Jeonju City, publicity company, deliberation committee and local residents and administrative project implementation method were suggested. Therefore, this study had summarized the project progress of signboard design for Jeonju traditional Korean style house village so that it may be utilized as a basic data for ensuring that this village would be developed as a region where tradition and history will be well conserved in the future through consultation with the relevant authorities.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.162-167
• /
• 2003

In this paper, systematization design method by analogical Interpretation which is profitable in the compatability and standardization of developed products and is useful of reducing construction time and price was introduced. Systematization design based on analogical interpretation is a method which systematizes each characteristic with mathematical description in order to make variable design parameters correspond with the terms desired. In this paper, after choosing a differential transformer as the sample for design components each characteristic was expressed mathematically by analogical interpretation and miniaturized ones were manufactured by similarity factors. The relationship between input voltages of an actual differential transformer and the model and output voltages occurred by the change of the displacements in operational axis was shown.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1242-1252
• /
• 2006

Many applications in computer graphics require complex, highly detailed models. However, to control processing time, it is often desirable to use approximations in place of excessively detailed models. Therefore, we have developed the notion of an optimal matrix to simplify the model surface which can then rapidly obtain high quality 2D patterns by flattening the 3D surface. Firstly, the woman's 3D body was modeled based on Size Korea data. Secondly, the 3D model was divided by shell and block for the pattern draft. Thirdly, each block was flattened by the grid and bridge method. Finally, we select the optimal matrix and demonstrate it's efficiency and quality. The proposed approach accommodates surfaces with darts, which are commonly utilized in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. This can facilitate much better approximations, in both efficiency and exactness.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.442-448
• /
• 1999

We introduce the systematization design method using similarity theory which is profitable in the c compatability and standardization of the developed products and the reduction of construction time and price to d develop and design a machine equipment. Systematization design method is to select the standard model for d designing and developing from the large machinery to the super precision one and then to induce the c characteristic of machines step by step in advance in case of miniaturizing and making largelongleftarrowscale. With this m method, we extract the peculiar characteristics through the close analysis on the physical and ttx:hnical part a and predict the characteristic experiment for the magnitude we desire by an머ogical mathematical analysis. At l last, we will get the design sample the users demand with the verification of the data on optimum design p previously. In this paper, we could predict the characteristic of the product the users rC'Quire in advance with the d design method applying similarity theor${\gamma}$ and suggested the design method which could meet the various r requirements the users want. Also, it is shown that the standardization design by the similarity theory is a available as comparing the characteristic values expc'Cted through the experiment of the actual actuator with t the theoretical character data of similarity theoη after selecting the linear actuator as a model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.3
• /
• pp.1-9
• /
• 2001

At the beginning of the lighting design, the improvement of lighting design method and standardization of the lighting design needed for saving lighting energy in the building design that can help to choose a high efficiency luminaire and it can calculate LLF(light loss factor). for that reason Average Illumination Calculation Software using ZCM for lighting designer was developed.

• Journal of Distribution Science
• /
• v.18 no.12
• /
• pp.55-66
• /
• 2020

Purpose: For bakery retailers that want to enter the Chinese market, this study seeks to draw implications through the analysis of Paris Baguette, Paul Bakery and local competitors. In particular, the study analyzes entry strategies, as well as the advantages and disadvantages of the companies. Research design, data and methodology: This study analyzed the Chinese bakery industry and overviewed the policy of bakery industry. The research method utilized Chinese Statistical Yearbook of Food Industry and literature related to Chinese bakery industry. Additionally, this study used case analysis methods for foreign and local bakery enterprises in the bakery industry. Results: During the rapid growth of bakery industry, Paris Baguette made a successful settlement by utilizing localization strategy; while on the contrary, Paul Bakery took a standardization strategy and failed in the Chinese market. Conclusions: Paris Baguette succeeded in launching localized products after thoroughly analyzing products that suit local tastes in China. However, Paul Bakery has been knocked out of the Chinese market for failing to capture the taste of the Chinese people by launching standardized products that reproduce French culture and taste. As such, the Chinese market is huge and differences exist in different provinces, so standardization and localization strategies should be appropriately utilized.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.211-218
• /
• 2001

This paper introduces a method of constructing expert systems in an integrated environment for automatic software design. This integrated environment may be applicable from top-level system architecture design, data flow diagram design down to flow chart and coding. The system is integrated with three CASE tools, FSD (Functional Structure Diagram), DFD (Data Flow Diagram) and structured chart PAD (Problem Analysis Diagram), and respective expert systems with automatic design capability by reusing past design. The construction way of these expert systems is based on systematic acquisition of design knowledge stemmed from a systematic design work process of well-matured developers. The design knowledge is automatically acquired from respective documents and stored in the respective knowledge bases. By reusing it, a similar software system may be designed automatically. In order to develop these expert systems in a short period, these design knowledge is expressed by the unified frame structure, functions of th expert system units are partitioned mono-functions and then standardized components. As a result, the design cost of an expert system can be reduced to standard work procedures. Another feature of this paper is to introduce the integrated environment for automatic software design. This system features an essentially zero start-up cost for automatic design resulting in substantial saving of design man-hours in the resulting in substantial saving of design man-hours in the design life cycle, and the expected increase in software productivity after enough design experiences are accumulated.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.249-263
• /
• 1996

According to the design method for constructing the G gori(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic G gori, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar and the collar strip create a visual effect by equalizing the lengths of the tow sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since th-ere in no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial requlation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the pattern design is as follows: 1) The conic angle for the G gori's girth, length and neck width is fixed at 70 degrees. 2) The radius of the cone is B/2. 3) The calculation formula is B/4 + 1.5cm 4) The armhole formula is B/4, the same as in the basic method. 5) The width formula is B/10. 6) The ratio of the collar junction(width of collar + width of collar strip)to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius (B/2), that is an arc that exceeds the length of the G gori's midsection; the component ratio of this length to the collar junction is accordingly 13:5. 8) The curve frame length of the back midsection is an arc exceeding B/4(the armhole line). 9) The ratio of the sleeve opening calculation formula to the armhole length is 8:5, forming an arc with the midsection length.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.470-477
• /
• 2022

EOTS for drones is showing another aspect of market expansion in detection and recognition areas previously occupied by artificial satellites. The two-axis EOTS for drones controls the vibration or disturbance caused by the drone during the mission so that EOTS can accurately recognize the goal. Vibration generated by drones is transmitted to EOTS. Therefore, it is essential to develop a stabilization controller that attenuates vibrations transmitted from drones so that EOTS can maintain the viewing angle. Therefore, it is necessary to standardize drone disturbance and secure the performance of EOTS disturbance attenuation controller optimized for disturbance level through this. In this paper, a method of standardizing drone disturbance applied to EOTS is studied, through which EOTS controller simulation is performed and stabilization controller shape is selected and designed.