• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.873-876
• /
• 2005

A low noise amplifier(LNA) using electro-magnetic field simulator is designed in standard 0.25um CMOS process. Integrated spiral inductor is simulated using EM field solver. Then LNA is simulated with active device, capacitor and simulated inductor by EM field solver. A S11 and S21 of -15.45dB and 17.8dB at 2.3GHz as simulation results was achieved. A Noise Figure is 2.92dB. And Measurements show a S11 and S21 of -12.4dB and 17.8dB at 2.3GHz. A Noise Figure of 3.3dB was achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1479-1480
• /
• 2011

In this paper, a novel design ultrasonic linear motor is proposed. The proposed motor consists of a ring type stator and a mover. They have spirals on their inner and outer surface, respectively. Along the spiral, a mover is travelled by a travelling extensional vibration mode of a ring type stator. Hence, a linear up-and-down motion is generated. Through the experimental data, we can verify the applicability regarding the autofocus lens drive.

• 한국정보처리학회논문지
• /
• 제6권11S호
• /
• pp.3299-3308
• /
• 1999

One of the most important prerequisites for a successful software process is the collaboration and software requirements negotiation of all stakeholders in the software development process. Remote users using computer networks can negotiate software requirements by computer supported system, and can share their informations. The goal of software requirements negotiation system is an integration of all win conditions and an agreement after resolution of conflicts. The existing systems need an exclusive system and must be dependent on specific platform and network. Users must have the knowledge of all stakeholder's status and use homogeneous collaborating applications. This paper presents the Web-based software requirements negotiation system for the purpose of resolution of the existing systems' problems. The Web-based software requirements negotiation system can be driven by WinWin Spiral model, and it is based on hybrid execution method. The proposed system is validated and tested on heterogeneous environments.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.217-219
• /
• 2009

본 논문에서는 NE6510179A 트랜지스터를 사용하고, 나선형 공진기를 이용하여 단일 고출력 발진기를 설계 측정하였다. 발진기의 출력과 주파수 선택을 공진기가 결정하므로, 공진기중에 Q값이 높은 나선형 공진기를 선택하였다. 이를 ADS Momentum을 이용하여 설계하여 제작 및 측정을 하였다. 이 때 측정된 단일 고출력 발진기의 성능은 22.61dBm @ 1.74GHz로 측정되었고, 위상잡음은 -146.76dBc/Hz @ 1MHz offset으로 측정 되었다.

• Design & Manufacturing
• /
• 제8권2호
• /
• pp.50-55
• /
• 2014

Recently, semi-stack mold have been developed for satisfying the various elements required in the mold industry. The mold is possible using with general-purpose injection molding machine by weight reduction through the improvement of the mold structure. In order to do that, tension core, spiral cooling system and half runner system were applied. It is effective for increased productivity and decreased of loss to the materials. However, the mold is required the filling balance in order to improve the quality and efficiency. Thus this study performed that optimum design and analysis of semi-stack mold for filling balance.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.108-114
• /
• 2008

Polynomial networks have been known to have excellent properties as classifiers and universal approximators to the optimal Bayes classifier. In this paper, the use of polynomial neural networks is proposed for efficient implementation of the polynomial-based classifiers. The polynomial neural network is a trainable device consisting of some rules and three processes. The three processes are assumption, effect, and fuzzy inference. The assumption process is driven by fuzzy c-means and the effect processes deals with a polynomial function. A learning algorithm for the polynomial neural network is developed and its performance is compared with that of previous studies.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.121-126
• /
• 1996

In this paper an MMIC VCO which can be used in a double conversion TV tuner is designed, fabricated and measured. The VCO is designed using the small signal method and fabricated using ETRI GaAs MMIC foundry. The 3x200$\mu$m gate width MESFET with 1$\mu$m gate length is used for an active device and MIM capacitors, spiral inductors, thin film resitors are used as passive elements. The VCO has output power of 10.95dBm at 1955 MHz with 5V bias voltage and 4V tuning voltage. The oscillation frequency change form 1947 MHz to 1964 MHz is obtaine dby an external varactor diode connected to the gate with a tuning voltage from 0 V to 6V.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권1호
• /
• pp.42-46
• /
• 2003

In this paper, an MMIC broadband amplifier for wireless communication systems has been developed by using an active feedback method. This active feedback operates at much higher frequencies than a method by a spiral inductor feedback and its size is independent of the inductance value. The MMIC broadband amplifier was designed using a $0.5{\;}{\mutextrm{m}}$ MESFET library. The fabricated chip area was $1.4{\;}mm{\;}{\times}{\;}1.4{\;}mm. Measurement showed a gain of 18 dB with a gain flatness of ${\pm}3$ dB in a 1.5 GHz~3.5 GHz band. The maximum output power and the minimum noise figure were 14 dBm and 2.5 dB in the same band, respectively.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.56-61
• /
• 1986

본 연구에서는 유체력의 조성을 명확히 함과 동시에 환상 시일부에서 발생 하는 유체력을 고려했을 때의 회전축계의 안정성에 미치는 영향을 비교 평가한다.

• Interaction and multiscale mechanics
• /
• 제2권4호
• /
• pp.413-430
• /
• 2009

The stator tooth is a key component of the electromechanical integrated toroidal drive system. The stator tooth is spiral in shape and the calculation of its displacements is difficult. In this paper, using the coordinate transformation method, the displacements of the stator tooth in the local coordinate system are expressed as the function of the variable in the drive coordinate system. Using the minimum potential energy principle, the equations of the displacements of the stator tooth under the loads are deduced. The displacement distributions within the stator tooth are investigated and the changes of the displacement distributions along with the main parameters are analyzed. This research can offer the basis for the strength and stiffness design of the drive system.