Interaction and multiscale mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Displacements of the helical stator tooth for an electromechanical integrated toroidal drive

  • Xu, Lizhong (Mechanical engineering institute, Yanshan University) ;
  • Zheng, Dazhou (Mechanical engineering institute, Yanshan University)
  • Received : 2009.08.22
  • Accepted : 2009.10.28
  • Published : 2009.12.25
⟨ Previous Next ⟩

Abstract

The stator tooth is a key component of the electromechanical integrated toroidal drive system. The stator tooth is spiral in shape and the calculation of its displacements is difficult. In this paper, using the coordinate transformation method, the displacements of the stator tooth in the local coordinate system are expressed as the function of the variable in the drive coordinate system. Using the minimum potential energy principle, the equations of the displacements of the stator tooth under the loads are deduced. The displacement distributions within the stator tooth are investigated and the changes of the displacement distributions along with the main parameters are analyzed. This research can offer the basis for the strength and stiffness design of the drive system.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Kuehnle, M.R., Peeken, H., Troeder, H. and Cerniak, S. (1981), "The Toroidal drive", Mech. Eng., 103(2), 32-39.
  2. Yao, L., Dai, J.S. and Wei, G. (2006), "Characteristics with respect to different meshing rollers of the toroidal drive", Mech. Mach. Theory, 41(7), 863-881. https://doi.org/10.1016/j.mechmachtheory.2005.10.010
  3. Wei, G., Yao, L., Cai, Y. and Dai, J.S. (2008), "Latency errors in the mathematical modelling and meshing characteristics of the toroidal drive", Math. Comput. Model., 47(9-10), 827-854. https://doi.org/10.1016/j.mcm.2007.05.015
  4. Mezani, S., Atallah, K. and Howe, D. (2006), "A high-performance axial-field magnetic gear", J. Appl. Phys., 99(8), 1-3(08R303). https://doi.org/10.1063/1.2158966
  5. Jorgensen, F.T., Andersen, T.O. and Rasmussen, P.O. (2008), "The cycloid permanent magnetic gear", IEEE T. Ind. Appl., 44(6), 1659-1665. https://doi.org/10.1109/TIA.2008.2006295
  6. Wang, J., Mezani, S. and David, H. (2006), "A novel high-performance linear magnetic gear", IEEE T. Ind. Appl., 126(10), 1352-1356. https://doi.org/10.1541/ieejias.126.1352
  7. Liu, X., Chau, K.T., Jiang, J.Z. and Yu, C.(2009), "Design and analysis of interior-magnet outer-rotor concentric magnetic gears", J. Appl. Phys., 105(7), 1-3(07F101). https://doi.org/10.1063/1.3058619
  8. Delin, Z. and Huamin, L. (1993), "Side surface harmonic stepper motor", J. Mech. Eng.(in China), 29(5), 96-98.
  9. Oliver, B. (2000), "Harmonic piezodrive-miniaturized servo motor", Mechatronics., 10(4), 545-554. https://doi.org/10.1016/S0957-4158(99)00062-8
  10. Xu, L. and Huang, Z. (2003), "Contact Stresses for Toroidal drive", J. Mech. Design, 125(3),165-168. https://doi.org/10.1115/1.1543990
  11. Xu, L. and Huang, J. (2005), "Torque for Electromechanical Integrating Toroidal drive", P. I. Mech. Eng. C-J Mec., 219(8), 801-811. https://doi.org/10.1243/095440605X31643
  12. Xu, L. and Fan, S. (2006), "Design and torque control for electromechanical integrating toroidal drive", Mech. Mach. Theory, 41(2), 230-245. https://doi.org/10.1016/j.mechmachtheory.2005.01.014