• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.5
• /
• pp.368-372
• /
• 2016

In this study, we develop a novel high-throughput micronanopatterning system that can implement continuous mechanical pattern inscribing on flexible substrates using a rigid grating mold edge. We perform a conceptual design of the process principle, specific modeling, and buildup of a real system prototype. This research also carefully addresses several important issues related to processing and controlling, including precision motion, alignment, heating, and sensing to enable a successful micronanopatterning in a continuous and high-speed fashion. Various micronanopatterns with the desired profiles can be created by tuning the mold shape, temperature, force, and substrate material toward many potential applications involving electronics, photonics, displays, light sources, and sensors, which typically require a large-area and flexible configurations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.359-364
• /
• 2013

In order to use a linear vibration motor for the actuator of a haptic interface, the motor must provide a higher reaction rate and longer service life than typical rotational motors with an eccentric mass. In this paper, we propose a linear vibration motor that is equipped with a voice-coil actuator and permanent-magnet springs. To concentrate the magnetic flux in the actuator, a Halbach-style magnetization pattern is used. Permanent-magnet springs replace mechanical springs to help increase the service life. We use the method of equivalent current sheets and the method of images to analyze and model the proposed vibration motor. These methods are validated using finite element analyses and experiments. A prototype motor is designed and fabricated. Tests with the prototype show the feasibility of the proposed linear vibration motor.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.1-16
• /
• 2003

Nowadays, retro to the past fashion is appeared just as often as new challenge and trial. The style of Renaissance Era is the most often revival theme for contemporary fashion. So, this study was focused on 16C of Renaissance costume. It is investigated the characteristics of Renaissance costume through referring the literature to be able to restore the past costume as through as possible with the object of building database for developing new design. This study is done in two different ways at the same time, direct study to restore and indirect study to refer. Direct one is of the past costume as thoroughas possible based on referring to the originals. The other is referring the costume historical literature The costumes to restore is chosen among 16C famous pictures on the basis of how much they can show the typical chracteristics of 16C costume. Materials including textiles and ornaments which are necessarily to restore were shopped in Dongdeamoon Market. Some materials had a problem to get exactly the same one in Seoul on 21C. After visiting imes, the materials is chosen as similar as originals. Three sets of costume were restored on the basis of referring "Pattern of Fashion" written by Janet Arnold. The costumes were restored by reinforcing bodice based on the size of waist and in every three works. The way of sewing is based on hand sewing for details and machin-sewing for seam. Quilting intl lining is uwed giving the fabric stiffness to maintain the form from the heavy padding. Also the part of piles on margins is used darts instead of gather, because of reducing bulkiness of seam. General closing methods are hook and eyes, and lacing with points.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.70-77
• /
• 2010

This study proposed an auto focusing method for a multi-focus image in assembling lens modules in digital camera phones. A camera module in a camera phone is composed of a lens barrel, an IR glass, a lens mount, a PCB board and aspheric lenses. Alignment among the components is one of the important factors in product quality. Auto-focus is essential to adjust image quality of an IR glass in a lens holder, but there are two focal points in the captured image due to thickness of IR glass. So, sharpness, probability and a scale factor are defined to find desired focus from a multi-focus image. The sharpness is defined as clarity of an image. Probability and a scale factors are calculated using pattern matching with a registered image. The presented algorithm was applied to a lens assembly machine which has 5 axes, two vacuum chucks and an inspection system. The desired focus can be determined on the local maximum of the sharpness, the probability and the scale factor in the experiment.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.2
• /
• pp.261-272
• /
• 2013

Algae boom (Red tide) in south coastal area of Korea has been appeared several times during a decade. If algae boom appears in the desalination plant, media filter and UF filter are clogged quickly, and the plant should be shutdown. In general, Algae can be removed from water by flotation better than by sedimentation, because of the low density of algal cell. The purpose of this study conducts the CFD simulation of DAF flotation basin to apply the design of the dissolved air flotation with ball filter in the Test Bed for SWRO desalination plant. In this study, Eulerian-Eulerian multiphase model was applied to simulate the behavior of air bubbles and seawater. Density difference model and gravity were used. But de-sludge process and mass transfer between air bubbles and seawater were ignored. Main parameter is hydraulic loading rate which is varied from 20 m/hr to 27.5 m/hr. Geometry of flotation basin were changed to improve the DAF performance. According to the result of this study, the increase of hydraulic loading rate causes that the flow in the separation basin is widely affected and the concentration of air is increased. The flow pattern in the contact zone of flotation basin is greatly affected by the location of nozzle header. When the nozzle header was installed not the bottom of the contact zone but the above, the opportunity of contact between influent and recycle flow was increased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.18-22
• /
• 2014

Residual stresses that occur during the welding process, are the main cause of failure and defects in welded structures. This paper, presents the use of an electronic processing laser speckle interferometer to measure the residual stress of a welded pipe for a nuclear power plant. A tensile testing machine was used to evaluate a welded pipe that failed in compression. The inform plane deformation and modulus of elasticity of the base metal and welds were measured using an interferometer. Varying the load on the welded pipe had a larger effect on the deformation of the base metal the other properties of the base metal and welds. The elastic moduli of the base metal and weld of the welded pipe were 202.46 and 212.14 GPa, respectively, the residual stress was measured to be 6.29 MPa.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.90-100
• /
• 2013

This study uses a survey questionnaire to identify the major customer age class of adult women who frequently mountain climb as well as analyze their purchasing behavior and preference of mountain climbing pants. The field survey, classified the types of mountain climbing pants, selected the types of mountain climbing pants that consumers preferred, and then analyzed the degrees of satisfaction for mountain climbing pants based on an evaluation of wearing. Specifically, the patterns of mountain climbing pants preferred by national brands and licensed brands were compared and analyzed. The validities of commercially available mountain climbing pants were analyzed through an evaluation of wearing comfort and an evaluation of wearing on a 3D simulation of the human body. The basic data for the development of mountain climbing pants are presented based on the results. The survey questionnaire results indicate that the major class of women consumers of mountain climbing goods was in the 40s to 50s; in addition, the types they most wore were straight type and functional cut type. The preferred brand was KOLONSPORT (which occupies a 21.2% market share), followed by THE NORTH FACE (13.0%), K2 (11.5%) and Kolping (10.0%). The main reason (26.8% of responses) that they preferred these brands was functionality. The difference in measurement of climbing pants patterns could be analyzed accurately in the pattern analysis, the wearing evaluation by the self-sonsory test and evaluation of wearing comfort through 3D simulation. The results of ANOVA on motions and items indicates that no significant difference was found among motions; however, a significant difference was recognized among items. A comparison of straight type and functional cut type showed that the functional cut type excelled slightly in wearing comfort.

• Journal of Fashion Business
• /
• v.2 no.4
• /
• pp.69-78
• /
• 1998

The purpose of this study was to identify the variables which could characteristics the New Young Generation (NYG), to investigate the relationship between level of NYG characteristics and information searching related to underwear purchasing, and the differences level of the NYG characteristics according to demographic variables (sex, grade, major), and examine the casual relationships of demographic variables (sex, place of growing background, parent's education) and level of the NYG characteristics on information searching related to underwear purchasing. The subjects were 723 college students (female = 324, male=398) living in Seoul and Kyuggi were participated in this study. The NYG is limited to person who born after 1970's. The result of this study were as follows; 1. Five factors of New Young Generation oriented characteristics were identified; F.1 'Info-telecommunication(Info-Telecom)'; F.2 'Family and Marriage'; F.3 'Consumption pattern'; FA 'Self-centered (Individualism)'; F.5 Work/Career oriented. 2. The relationship between the NYG characteristics and information search in underwear purchasing were significanted. 3. In demographic variables, gender, grade, and major were partially significant differences. 4. In male students, the result of the casual relationship between demographic variables with NYG characteristics and the level of the NYG in underwear purchasing showed that grade, background of grownplace, level of parent's education were significanted the high level of info-telecom factor associated with higher grade, city-grown, higher level of parent's education. In conclusion, the result showed that the level of NYG characteristics was significant to male students and specially for grade older students. The background of parent's education level was the another important variables to predicting the NYG characteristics. Finally the higher the NYG characteristics, the more information search in underwear purchasing.

• Journal of Internet Computing and Services
• /
• v.12 no.6
• /
• pp.161-170
• /
• 2011

Despite some practical confusion over the variations in the diagram which may be drawn differently depending upon the CASE, the statechart of UML has been widely used to show the dynamic behaviour of the systems. Prior research has employed either simple switch-case statement or the state design pattern to generate source code from the statechart, which may result in varying source codes. This paper made an attempt to formally define the statechart and generate source codes from it. Firstly we cleaned up the XMI which was generated from different CASEs. This XMI has been translated to the EHA to identify automata contained in it. Then the elements of the statechart metamodel were mapped to the java programs. We also verified the quality of source codes by measuring functionality and maintainability. The case employed in this study was the air conditioner. The reason was that the case includes various states and transitions of interest. It was found that XMI was well extracted by removing some legacy codes in the CASE and the source codes were then successfully generated with the concurrency and hierarchy of the statechart. Further research is required to validate it practical significance with a larger case.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1250-1264
• /
• 2017

This paper presents the architecture design, implement, experimental validation of a bistatic backscatter wireless communication system in Wi-Fi network. The operating principle is to communicate a tag's data by detecting the power level of the power modulated Wi-Fi packets to be reflected or absorbed by backscatter tag, in interconnecting with Wi-Fi device and Wi-Fi AP. This system is able to provide the identification and sensor data of tag on the internet connectivity without requiring extra device for reading data, because this uses an existing Wi-Fi AP infrastructure. The backscatter tag consists of Wi-Fi energy harvesting part and a backscatter transmitter/a power-detecting receiver part. This tag can operate by harvesting and generating energy from Wi-Fi signal power. Wi-Fi device decodes information of the tag data by recognizing the power level of the backscattered Wi-Fi packets. Wi-Fi device receives the backscattered Wi-Fi packets and generates the tag's data pattern in the time-series of channel state information (CSI) values. We believe that this system can be achieved wireless connectivity for ultra- low-power IoT and wearable device.