• 품질경영학회지
• /
• 제31권4호
• /
• pp.239-246
• /
• 2003

Dynamic robust design has been regarded as the most powerful design methodology for improving product quality, Dynamic SN ratio adopted in dynamic robust design combines two major quality attributes, the variability around the linear function and the slope of the linear function, into a single design metric. The principal shortcoming associated with the dynamic SN ratio is that the metric is independent of designer's preferences for the quality attributes due to priori sets of attribute tradeoff values inherent in it. Therefore, a more rigorous preference­based design metric to accurately capture designer's intent and preference is needed. A new design metric that can be used in dynamic robust design is proposed. The effectiveness of the proposed design metric is examined with the aid of a demonstrative case study and the results are discussed.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.292-297
• /
• 2008

유비쿼터스 컴퓨팅 서비스 환경은 사용자와 시스템간의 상호작용성이 매우 중요하며, 이러한 상호작용성을 사용자 중심의 시각에서 평가하기 위한 새로운 평가 기법의 개발이 필요하다. 본 연구는 유비쿼터스 서비스의 특성이 반영된 사용자 중심의 상호작용성 평가 metric 개발을 목표로 한다. 이를 위하여 첫째, 기존의 유비쿼터스 서비스 평가방법론을 검토하여, 유비쿼터스 서비스 평가를 위한 평가 속성을 정의하였으며, 둘째, 대인 서비스 평가기법, 사용성 평가기법, 정신측정학 기반의 평가기법 등의 기존의 서비스 평가방법론의 한계를 극복할 수 있는 사용자중심의 상호작용성 평가 metric 을 개발하였다. 그리고 본 연구에서 제안된 평가 metric 을 u-home 서비스의 평가에 실제로 적용하여 그 유효성을 검증하고 각 지표별 중요도를 구해보았다. 본 연구에서 제안한 상호작용성 평가 metric 은 유비쿼터스 서비스 상호작용성 수준을 평가함으로써 잠재 서비스 사용자들을 분석하고, 제안된 프레임워크의 서비스 개발단계에서의 잠재 서비스 사용자에 대한 요구사항 수렴 및 수준 파악에 유용하게 활용될 수 있다.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.78-94
• /
• 2000

The ever increasing demands for enhanced competitiveness of engineered products require a "designing-in-quality" strategy that can effectively and efficiently incorporate concepts of uncertainty, quality, and robustness into design. Engineered design optimization approaches that are typically carried out with respect to a single objective become inadequate to address these multiple set of requirements. This paper presents a design metric for a multi-attribute robust design problem with designer′s preferences on the performance accuracy and the performance precision. The use of this design metric as the robust optimal design criterion in multi-stage experimentation and modeling technique is presented. The effectiveness of the overall design procedure and the performance of the proposed design metric are tested with the aid of IC design and the results are discussed.

• 품질경영학회지
• /
• 제29권1호
• /
• pp.47-61
• /
• 2001

The ever increasing demands for enhanced competitiveness of engineered products require a "designing-in-quality" strategy that can effectively and efficiently incorporate multiple design objectives into design. Robust design can be viewed as a multi-characteristic design problem requiring tradeoffs between mean and variance characteristics. Firstly this paper analyzes the intrinsic preference of the traditional SN ratio on mean and variance, and secondly presents a new design metric for a robust design using concepts from utility theory to accurately capture designer′s intent and preference on mean and variance. The steps to apply the proposed design metric as the robust design criterion in an orthogonal array based engineering experimentation is presented with the aid of a demonstrative case study. The performance of the proposed design metric is tested, and the results are discussed.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.63-76
• /
• 2012

Objective: The main objective of this study is to propose a user-centered assessment metric for ubiquitous services. Background: As the ubiquitous era took off, the interactions between ubiquitous services and users have come to take an important position. It is essential to conceptualize a new assessment model that considers human-system interaction capability with a user-centered design perspective. Method: The evaluation model for the interactivity of ubiquitous service was approached from the concept of usability and inter-personality of services. As a validation study, suggested assessment metric was utilized to evaluate the u-Home service. Priority weighting of each assessment metric was derived using the quantification type-I analysis. Results: To evaluate interactivity, this study suggested a quantitative metric for user testing performed after classifying the interactivity characteristics to contextualization; ubiquity; user experience; and service capability. Conclusion: This study suggest the metric for the ubiquitous service that are experienced in real life, and introduced the concept of ubiquitous service interactivity. Application: The suggested evaluation metric can be used to evaluate interactivity level of ubiquitous service and identify the potential problem and usability requirements at the early stage of service development.

• 한국CDE학회논문집
• /
• 제3권2호
• /
• pp.140-144
• /
• 1998

We propose the area between a pair of non-self-intersecting 2-D parametric curves with same endpoints as an alternative distance metric between the curves. This metric is used when d curve is approximated with another in a simpler form to evaluate how good the approximation is. The traditional set-theoretic Hausdorff distance can he defined for any pair of curves but requires expensive calculations. Our proposed metric is not only intuitively appealing but also very easy to numerically compute. We present the numerical schemes and test it on some examples to show that our proposed metric converges in a few steps within a high accuracy.

• 정보처리학회논문지D
• /
• 제12D권4호
• /
• pp.609-616
• /
• 2005

소프트웨어 개발의 높은 생산성을 향상시키기 위한 재사용 기술로 컴포넌트 기반 개발 방법론은 널리 사용되게 되었다. 컴포넌트의 재사용을 향상시키기 위해서는 설계된 컴포넌트가 측정가능 해야 하므로 컴포넌트의 품질을 정량적으로 평가할 메트릭스가 필요하다. 따라서 본 논문에서는 컴포넌트의 특성을 반영한 컴포넌트의 결합도 메트릭을 제안한다. 또한 제안된 결합도 메트릭의 정확성을 검증하기 위해 사례연구를 제시하고 기존 결합도 메트릭스와의 비교 분석 결과를 제시한다. 제안된 결합도 메트릭은 좀 더 정확하게 컴포넌트의 품질을 평가하고 Briand이 제시한 결합도 메트릭의 필요조건을 만족한다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권10호
• /
• pp.912-924
• /
• 2003

설계 재구조화는 설계 구성 요소들을 재조직함으로써 품질을 향상시켜 소프트웨어 유지보수 비용을 줄인다. 객체지향 메트릭은 설계 결함을 발견하고 설계 구성 요소들을 재조직하기 위한 변형을 찾는데 도움을 제공한다. 기본적으로 이러한 설계 변형은 초기 시스템의 행위를 보존해야 한다. 본 논문에서는 객체지향 설계 행위를 보존하는 메트릭 기반 재구조화 기법을 집합론에 기반하여 기술하고, 자바로 작성된 응용 프로그램에 적용하여 유효성을 확인한다. 그리고 재구조화의 효과성을 확인하기 위하여 시뮬레이티드 어닐링(simulated annealing) 알고리즘을 사용한 방법과 비교한다.

• 대한건축학회논문집:계획계
• /
• 제34권12호
• /
• pp.49-54
• /
• 2018

Applying metric(distance) factor as weighting to spatial syntax is known to not contribute to the explanatory power for the human movement behavior as compared to the geometric(angle) factor according to the negative results of several related studies. However, Kim & Piao (2017) assumed that there is not a problem of the metric factor itself but a problem of the way of applying the metric factor as weighting, and presented a new possibility of the metric factor as weighting by proposing and verifying the methods of applying the metric weighting, which are different from the existing ones. The purpose of this study is to propose advanced methods of applying the metric weighting to space syntax, and to verify whether they contribute to the improvement of explanatory power of space syntax analysis. In this paper, we propose functions for combined depth of distance-step that combine the distance-weighted depth function with the step depth function and apply them to axial segment analysis to check the improvement of explanatory power of them.

• International Journal of Computer Science & Network Security
• /
• 제21권7호
• /
• pp.284-296
• /
• 2021

Quality Models are important element of the software industry to develop and implement the best quality product in the market. This type of model provides aid in describing quality measures, which directly enhance the user satisfaction and software quality. In software development, the inheritance technique is an important mechanism used in object-oriented programming that allows the developers to define new classes having all the properties of super class. This technique supports the hierarchy design for classes and makes an "is-a" association among the super and subclasses. This paper describes a standard procedure for validating the inheritance metric in Quality Model for Object-Oriented Design (QMOOD) by using a set of nine properties established by Weyuker. These properties commonly using for investigating the effectiveness of the metric. The integration of two measuring methods (i.e. QMOOD and Weyuker) will provide new way for evaluating the software quality based on the inheritance context. The output of this research shows the extent of satisfaction of the inheritance metric in QMOOD against Weyuker nine properties. Further results proved that Weyker's property number nine could not fulfilled by any inheritance metrics. This research introduces a way for measuring software that developed using object-oriented approach. The theoretical validation of the inheritance metric presented in this paper is a small step taken towards producing quality software and in providing assistance to the software industry.