• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.225-232
• /
• 1999

The effect of manufacturing parameters such as molding and curing conditions on friction characteristics of friction materials was studied using a pad-on-disk type friction tester. Friction materials containing 15 ingredients were investigated for an optimal manufacturing condition for the best friction characteristics employing Taguchi robust experimental design. The main effects were different for mechanical properties and friction characteristics and were strongly influenced by manufacturing conditions. An optimum manufacturing condition was obtained to achieve the best friction characteristics concerning mechanical properties(hardness, porosity, wear resistance), friction stability, and change of rotor temperature.

• Korean Institute of Interior Design Journal
• /
• v.24 no.4
• /
• pp.124-134
• /
• 2015

This study aims to identify the characteristics of expression of place identity shown in public design of Choryang Ibagugil in Dong-gu, Busan and analyze them from physical aspects and from psychological ones. Choryang Ibagugil has special historicity indicating that it is a hillside road(Sanbokdoro) dwelling site created after the 6.25 Korean War and the quintessence of Busan. In addition, the site is a good example that used the topographic characteristics as they were and used the road for movement called as 'gil' to design public environment. Ibagugil connected to Sanbokdoro (i.e. Mangyang-ro) starting from the big road (Busan Station) where there was a large floating population represented the regional identity to public design by the medium of 'gil.' As a result of analyzing the characteristics of expression of place identity based on the current status discovered, our conclusions could be drawn as follows: First, place forms identity under interpersonal relationships and there is a story on the lives of people in the contexts between place and identity. Second, place identity is an independent specialty of a certain place and expression of place identity into public design makes the place more place-like. Ibagugil expressed its identity while adapting to the topographic characteristics of hillside road(Sanbokdoro). Third, adjacent public buildings were included into Ibagugil, thus highlighting the placeness, although it is considered that it is ambiguous to determine it as public design in the current-status analysis. Fourth, from the public value aspect, slumized hillside road(Sanbokdoro) was improved, which led to improvement in quality of environment and improvement in pride of local residents. Resultingly, it can be said that the place identity appeared in the public design of Choryang Ibagugil were the stories that happened in this place. Moreover, the indication of future image of how the place will be developed in the future makes the value of the place more significant. Therefore, in public design for expressing place identity, utilization of independent speciality of the site is considered to be an important factor. By doing so, 'place becomes a real place' and 'place can get an independent identity.' Going further, it comes to get the characteristics of 'being the place as it is.'

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.65-68
• /
• 2000

In this paper, design parameters are investigated and design procedure is established for PCS mobile station, especially for receiver RF block. And simulation environment to analyze parameters of the receiver RF block to determine whether it satisfies the receiver standard, IS-98C, is calculated. Design parameters are simulated and optimized. With simulated results, PCS mobile station is implemented and tested. Measured results show good agreement with simulation Design procedure can be used to get optimum characteristics for each of receiver block. By using optimum characteristics, mobile station can be designed more efficiently.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.161-167
• /
• 2002

This paper describes the types and features of amphibious ships which have been constructed and commissioned. The characteristics of hull form design also are studied. Design constraints due to general arrangement and the satisfaction of requirements are investigated. We represent the design concept of hull form based on the design data of the worldwide amphibious ships and our experiences.

• 도로교통
• /
• s.76
• /
• pp.2-7
• /
• 1999

Seismic design in low to moderate seismic regions has to be based on the characteristics of seismic risk, ground motion and structural response in that region. The characteristics of seismic hazard in low to moderate seismic regions are reviewed briefly. The recent findings on the dynamic behavior subjected to the moderate intensity level of ground motion are summarized. The seismic design considerations in Eastern America, China, Australia, Thailand and Hong Kong will be introduced. The effort to adopt the limited ductility design in low to moderate seismicity regions will be reported. Finally research works that are required for the implementation of the limited design concept will be proposed.

• Journal of the Korean Society for Railway
• /
• v.2 no.2
• /
• pp.6-12
• /
• 1999

In this study, the most important suspension characteristics of railway vehicle, such as primary and secondary stiffness, are optimized to maximize ride qualify. Critical speed, secondary suspension stroke oil tangent track and derailment coefficient on the maximum curvature, are selected as the performance constraints. Piecewise linear curving model is used to evaluate derailment coefficient where it is assumed that wheel/rail contacts occurs at tread or at idealized flange. The combined design procedure is used to optimize above design variables at the same time.

• Journal of Mechanical Science and Technology
• /
• v.17 no.1
• /
• pp.40-47
• /
• 2003

In this paper, we constructed the analytic model of control valve as a function of electric and geometric parameters, and analyzed the influence of the design parameters on the dynamic characteristics. For improving the dynamic characteristics, optimal design is conducted by applying sequential quadratic programming method to the analytic model. This optimal design aims to minimize the response time and maximize force efficiency. By this procedure, control valve can be designed to have fast response in motion.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.04a
• /
• pp.217-222
• /
• 1999

Seismic design in low to moderate seismic regions has to be based on the characteristics of seismic risk ground motion and structural response in that region. The characteristics of seismic hazard in low to moderate seismic regions are reviewed briefly. The recent findings on the dynamic behavior subjected to the moderate intensity level of ground motion are summarized. The seismic design considerations in Easterm America China Australia Thailand and Hong Kong will be introduced, . The effort to adopt the limited ductility design in low to moderate seismicity regions will be reported. Finally research works that are required for the implementation of the limited design concept will be proposed.

• International Journal of Automotive Technology
• /
• v.5 no.3
• /
• pp.189-194
• /
• 2004

The viscoelastic layer material is widely used to control the noise and vibration characteristics of the panel structure. This paper describes the design technology of the effective vibration damping treatment using the concept of the equivalent parameter of viscoelastic layer materials. Applying the equivalent parameter concepts based on theories of shell, it is possible to simulate the finite element analysis of damping layer panel treatments on the vibration characteristics of the structure. And it is achieved the reduced computational cost and the optimal design of topological distribution for the reduction of vibration effect.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.3
• /
• pp.545-551
• /
• 2003

Robust design is to identify appropriate settings of control factors that make the system's performance robust to changes in the noise factors that represent the source of variation. In this paper we propose how to simultaneously optimize multiple quality characteristics using the principal component analysis of multivariate statistical analysis. An example is illustrated to compare it with already proposed method.