• Title/Summary/Keyword: Design and analysis

Search Result 48,516, Processing Time 0.083 seconds

A Experimental Analysis on the Relationship between the Angle of a Locker and the Clamping Force of Wedge Type Rail Clamp (Locker의 물림각과 쐐기형 레일클램프의 압착력에 관한 실험적 고찰)

  • Han Dong-Seop;Shim Jae- Joon;Han Geun- Jo;Lee Kwon-Hee
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2005.10a
    • /
    • pp.247-252
    • /
    • 2005
  • The wedge type rail clamp has the operating mechanism: First, the jaw pad clamps a rail with small clamping force Next as the wind speed increases, the clamping force of the jaw pad is increased by the wedge. In order to design the wedge type rail clamp, we need to determine the proper wedge angle to minimize the sliding distance of a roller and the proper clamping angle of a locker to generate the initial clamping force of a jaw pad. The researches for the proper wedge angle have conducted, and in this study we conducted the investigation to determine the proper clamping angle of a locker in the rail clamp with wedge angle of $10^{\circ}$. Because the initial damping force of the jaw pad was determined by the clamping angle of the locker, in order to carry out the clamping force of a jaw pad, we measured the locking force applied to a locker with respect to the clamping angle of a locker, such as $3^{\circ},\;4^{\circ},\;5^{\circ},\;6^{\circ},\;$ using a pressure gauge, and compared the results with the FEA results.

  • PDF

The evaluation of image guide system in case of rectal cancer (직장암 치료시 영상유도 시스템의 유용성 평가)

  • Jang, Sewuk;Ahn, Seungkwon;Lee, Sangkyoo;Kim, Jooho;Lee, Wonju;Cho, Jeonghee
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.29 no.1
    • /
    • pp.85-92
    • /
    • 2017
  • purpose: Image Guide System offers therapy precise, especially Intensity Modulated Radiation Therapy. However, organs at pelvis have variation and uncertainties each therapy. it brings IG system for verifying patient's position. In this study, analysis the variation at pelvis during rectal cancer radiation therapy. Moreover design the patient re-setup technique and apply to patients. Material and Method: 40 rectal cancer patient who have radiation therapy. The 530 image which acquired from IG system are analyzed. The bone structure, bladder, gas in the rectum, small bowel, soft tissue, weigh loss are evaluated by the criterion. The criterion are classified by best, good, bad and figure out the ratio with count. The re-setup proceed in case of one or over the two get the bad criterion and figure out the ratio of re-setup results: The ideal of therapy ratio is 19.2 % each criterion. And the good for therapy ratio is 54.9 %, the cases of bad for therapy is 25.8 %. The bad cases are have therapy after re-setup with post process. conclusion: Each pre-treatment image that acquired IG system has different results despite of same patients. The 25.8 % need to re-setup in order to unsuitable therapy. It is implies that the IG system is necessary establishing precise treatment plan like IMRT especially rectal cancer.

  • PDF

XML Schema Evolution Approach Assuring the Automatic Propagation to XML Documents (XML 문서에 자동 전파하는 XML 스키마 변경 접근법)

  • Ra, Young-Gook
    • The KIPS Transactions:PartD
    • /
    • v.13D no.5 s.108
    • /
    • pp.641-650
    • /
    • 2006
  • XML has the characteristics of self-describing and uses DTD or XML schema in order to constraint its structure. Even though the XML schema is only at the stage of recommendation yet, it will be prevalently used because DTD is not itself XML and has the limitation on the expression power. The structure defined by the XML schema as well as the data of the XML documents can vary due to complex reasons. Those reasons are errors in the XML schema design, new requirements due to new applications, etc. Thus, we propose XML schema evolution operators that are extracted from the analysis of the XML schema updates. These schema evolution operators enable the XML schema updates that would have been impossible without supporting tools if there are a large number of XML documents complying the U schema. In addition, these operators includes the function of automatically finding the update place in the XML documents which are registered to the XSE system, and maintaining the XML documents valid to the XML schema rather than merely well-formed. This paper is the first attempt to update XML schemas of the XML documents and provides the comprehensive set of schema updating operations. Our work is necessary for the XML application development and maintenance in that it helps to update the structure of the XML documents as well as the data in the easy and precise manner.

A New Mode Changable Asymmetric Full Bridge DC/DC Converter having 0 ~ 100 % Duty Ratio (0 ~ 100 % 시비율을 갖는 새로운 모드 가변형 비대칭 풀 브리지 DC/DC 컨버터)

  • Shin, Yong-Saeng;Roh, Chung-Wook;Hong, Sung-Soo;Han, Sang-Kyoo
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.15 no.2
    • /
    • pp.103-110
    • /
    • 2010
  • In this paper, a new mode changeable asymmetric full bridge dc/dc converter is proposed to solve the freewheeling current problem of the conventional zero voltage switching(ZVS) phase shift full bridge(PSFB) dc/dc converter of low output voltage and high output current applications. The proposed converter is operated as an asymmetric full bridge converter when the duty cycle is less than 50% and active clamp full bridge converter when the duty cycle is greater than 50%. As a result, since its freewheeling current is eliminated, the conduction loss is lower than that of the conventional ZVS PSFB dc/dc converter. Moreover, ZVS of all power switches can be ensured along a wide load ranges and output current ripple is very small. Therefore, high efficiency of the proposed converter can be achieved. Especially since its operation mode is changed to the active clamp full bridge converter during hold up time and can be operated with 50~100% duty ratio, it can produce the stable output voltage along wide input voltage range. The operational principles, theoretical analysis and design considerations are presented. To confirm the operation, validity and features of the proposed converter, experimental results from a 1.2kW($400V_{dc}/12V_{dc}$) prototype are presented.

Development of Determination Criteria Installing Crash Cushion on Freeway Off-Ramp (고속도로 진출램프 부근의 충격흡수시설 설치여부 판단기준 개발에 관한 연구)

  • 하태준;박제진;오재철
    • Journal of Korean Society of Transportation
    • /
    • v.20 no.7
    • /
    • pp.107-116
    • /
    • 2002
  • Crash Cushion is a kind of safety facilities on roadside which acts the role of absorbing impact energy when vehicles are driven out of normal route such as Gore area of freeway off ramp. Criteria for severity index considering accident occurrence possibility are needed to have strong effect on installing the facilities. However, present criteria for establishing crash cushion design do not include such processes. Therefore, the paper presents two kinds of study to develop criteria for severity index. First of all, development of accident forecasting model on freeway off ramp is presented. The module is a relationship between accidents and road environment by negative binomial distribution (NB) which is called to reflect very well quality of accidents at Gore of crash cushion installed freeway Secondly, freeway exiting behavior model is developed because the human factor is the most important one. However, many literatures have shown between road environment and accidents which are more quantitative than human factor. The study supposed advanced process steps on actual freeway and analysed correlation between variables and accidents. The criteria for severity index is presented to determine whether to install or not by benefit cost analysis for each module. The standard for severity index will help to determine whether to install the crash cushion or not and to estimate severity for freeway and off ramp.

Applicability Estimation of Ballast Non-exchange-type Quick-hardening Track Using a Layer Separation Pouring Method (층 분리주입을 이용한 도상자갈 무교환방식 급속경화궤도의 적용성 평가)

  • Lee, Il Wha;Jung, Young Ho;Lee, Min Soo
    • Journal of the Korean Society for Railway
    • /
    • v.18 no.6
    • /
    • pp.543-551
    • /
    • 2015
  • Quick-hardening track (QHT) is a construction method which is used to change from old ballast track to concrete track. Sufficient time for construction is important, as the construction should be done during operational breaks at night. Most of the time is spent on exchanging the ballast layer. If it is possible to apply the ballast non-exchange type of quick-hardening track, it would be more effective to reduce the construction time and costs. In this paper, pouring materials with high permeability are suggested and a construction method involving a layer separation pouring process considering the void condition is introduced in order to develop ballast non-exchange type of QHT. The separate pouring method can secure the required strength because optimized materials are poured into the upper layer and the lower layer for each void ratio condition. To ensure this process, a rheology analysis was conducted on the design of the pouring materials according to aggregate size, the aggregate distribution, the void ratio, the void size, the tortuosity and the permeability. A polymer series was used as the pouring material of the lower layer to secure the void filling capacity and for adhesion to the fine-grained layer. In addition, magnesium-phosphate ceramic (MPC) was used as the pouring material of the upper layer to secure the void-filling capacity and for adhesion of the coarse-grained layer. As a result of a mechanics test of the materials, satisfactory performance corresponding to existing quick-hardening track was noted.

Analysis of the Evacuation Safety in a Fire at Welfare Center for Disabled (장애인복지관 화재 시 피난안전성 분석)

  • Park, Sunah;Lee, Jai Young
    • Journal of the Korea Convergence Society
    • /
    • v.12 no.12
    • /
    • pp.315-322
    • /
    • 2021
  • This study analyzes the Required Safe Egress Time (RSET), in the event of a fire at a welfare center for the disabled, using the emergency passage according to the floor arrangement of users to evaluate the safety and the difference in RSET for each emergency passage using the Pathfinder simulation program to suggest an efficient evacuation method. As a result of RSET, it was found that there is no problem in evacuation safety for the current state of the facility's personnel allocation by satisfying the standard RSET in case of fire, and evacuation can be completed safely by evacuating through stairs rather than using elevators if possible. It is necessary for employees to be provided sufficient education and training in advance so that they can evacuate effectively with the disabled in case of fire. This study gives significance in saving many precious lives and safely evacuate in case of fire as evacuation routes were secured through the design, construction and operation of facilities for the disabled and the RSET was shortened through regular evacuation practices. It is necessary to discuss the further RSET studies based on the automatic fire shutters open or not when a fire occurs at a specific location following the installation of automatic fire shutter at the entrance of each floor of the facilities.

Analysis of Learners' Characteristics and Preferences for Effective Online Learning (효과적인 온라인 학습을 위한 학습자특성과 선호도 분석)

  • Lee, Young Lim;Im, Hee-Joo
    • Journal of Convergence for Information Technology
    • /
    • v.11 no.12
    • /
    • pp.138-147
    • /
    • 2021
  • This study aims to analyze the characteristics and preferences of learners who participated in college online classes for effective online learning. A total of 101 college students who participated in online classes completed the survey including personal characteristics of students and learning factors that affect online classes. The results showed that male students were more likely than female students to respond that online classes were more effective. Likewise students who learned from video recordings compared to those who learned from real-time lectures. As a result of analyzing the difficulties of online learning, there was a high probability that online learning was ineffective for students who had difficulties in self-learning and asking questions to their lecturers. Likewise, students who spent a lot of time studying online lectures, there was a high probability that online classes would be more effective for students who spent a lot of time on assignments. The results suggest that online learning is more effective for students who learn actively and self-directedly than those who passively participate in classes. This study implies that it is necessary to design online classes based on the characteristics and preferences of learners to improve the quality of education.

A Study on the Type of Reading Aloud Performance for Children (어린이를 위한 낭독공연의 유형 연구)

  • Oh, Pan-Jin
    • (The) Research of the performance art and culture
    • /
    • no.37
    • /
    • pp.223-247
    • /
    • 2018
  • A reading aloud performance is an activity in which the actors convey the meaning of the play to the audience through reading the play without memorizing the play. Although this term has been used for a long time, it can be said in the early 2000s that Korea began to pay attention to reading aloud performance in the cultural world. As the theater education is strengthened in the 2015 revision curriculum, interest in this "reading aloud performance" is also growing. In this article, we analyzed the reading aloud performance of the 8th contemporary Japanese drama '2018' in order to utilize the reading aloud performance in the educational field and to utilize it in the lecture of the children education. There are two types of rehearsals for the actors on stage: 'Reading by watching drama', 'Playing by memorizing drama', and 'Mixing two types'. In the end, the key is that there is no set rule for the type of reading aloud performance. It's not trouble to see or not to see the play. It is not necessary to have a stereotype that you should do a proper reading aloud performance in consideration of your situation, but that you should do this. If children understand the concept of read aloud performance in a flexible way, the educational effect will be greater. Based on this analysis, we suggested 'not sticking to the form of reading aloud performance' and 'choosing various types of reading aloud performance' as a criterion for applying to the education field for children. In addition, the sub-criteria required for selecting 'various types of lecture performances' include' selecting a specific scene in the content of the play ',' considering the level or situation of the student ',' not hesitating to make a new type of lecture performance '. I hope that this article will be a stepping stone to revitalize the discussion in the educational world where discussion on the performance of reading aloud is requested, and to solve the problem of lack of educational design due to lack of theory.

Design and Implemention of Real-time web Crawling distributed monitoring system (실시간 웹 크롤링 분산 모니터링 시스템 설계 및 구현)

  • Kim, Yeong-A;Kim, Gea-Hee;Kim, Hyun-Ju;Kim, Chang-Geun
    • Journal of Convergence for Information Technology
    • /
    • v.9 no.1
    • /
    • pp.45-53
    • /
    • 2019
  • We face problems from excessive information served with websites in this rapidly changing information era. We find little information useful and much useless and spend a lot of time to select information needed. Many websites including search engines use web crawling in order to make data updated. Web crawling is usually used to generate copies of all the pages of visited sites. Search engines index the pages for faster searching. With regard to data collection for wholesale and order information changing in realtime, the keyword-oriented web data collection is not adequate. The alternative for selective collection of web information in realtime has not been suggested. In this paper, we propose a method of collecting information of restricted web sites by using Web crawling distributed monitoring system (R-WCMS) and estimating collection time through detailed analysis of data and storing them in parallel system. Experimental results show that web site information retrieval is applied to the proposed model, reducing the time of 15-17%.