• 한국의류학회지
• /
• 제46권3호
• /
• pp.424-435
• /
• 2022

Aesthetic impression, structural stability, functionality during exercise, freedom of movement and physiological suitability should be considered when developing aquarobic wear for middle-aged women. We conducted a visual evaluation of the commercial aquarobic wear of the five brands (ARENA, TURN, RALLY, RENOMA and ELLE) with the highest market share and selected three items: one-piece type (OPT); two-piece type (TPT) and whole-body type (WBT). These are the most worn types of aquarobic wear for each brand. The G4 showed the best results in appearance evaluation of the shoulder strap width, front neckline, armhole line, side hip line and short pants length in the OPT category. The TPT had better ratings as the shoulder strap was located in the center of the shoulder, and the front and the back necklines were not too deep. The five items of WBT clothing received similar ratings for each element, so it is considered that the advantages are evenly distributed. No single design was a clear favorite. Based on the above results, continuous research on the development of aquarobic wear that is more suitable and preferable for middle-aged women should be conducted.

• 한국화재소방학회논문지
• /
• 제31권1호
• /
• pp.1-9
• /
• 2017

본 연구에서는 거실제연설비가 설치된 철도 지하환승통로에 현장성능평가시험인 제연 TAB(Test, Adjusting, Balancing)를 실시하여, 제연설비 성능 확보에 미치는 영향을 분석하고 개선방안을 도출하였다. 제연 TAB는 지하환승통로의 제연설비 설계자료 분석, 제연덕트 누기테스트, 제연송풍기와 덕트의 풍량 및 풍속 측정, Smoke test로 나누어 진행되었다. 제연덕트 누기시험을 통해 누기율을 측정하여 덕트의 기밀성을 확인하였고, 흡입측 덕트 정압손실로 인한 제연풍량 부족의 문제점을 개선하여 송풍기의 성능을 확보하였다. 또한, Smoke test을 통해 예상제연구역별 제연댐퍼 동작 시 자연풍, 열차풍 영향으로 인한 문제점을 분석하고 개선하여 예상 제연구역 내 제연이 원활하게 이루어짐을 확인하였다.

• 한국항공우주학회지
• /
• 제41권12호
• /
• pp.994-1001
• /
• 2013

헬기의 개발 과정은 설계, 제작 및 시험평가로 구분될 수 있으며, 시험평가는 구성품 시험, Rig 시험, 체계 지상시험 및 비행시험의 순서로 단계적으로 수행된다. 지상시험이 종료되고 최초 비행에 앞서, 비행 안전성을 담보하기 위해 미군사규격은 50시간 비행전 수락시험을 요구하고 있다. 비행전 수락시험은 헬기를 지상결박하여 가혹한 하중을 부과하는 시험으로서, 이의 수행을 위해서는 헬기 시제기와 유사한 별도의 지상 시험 시제기가 필요하며, 많은 비용과 기간이 소요되는 시험이다. KUH의 경우 국내 개발 환경을 고려하여 미군사규격의 요구도를 변형 후 수행하였으며, 본 논문은 KUH 비행전 수락시험의 절차 및 결과를 통하여 헬기 개발 환경에 따른 적절한 비행전 수락시험 수행 방안을 제시하고자 한다.

• 한국임상보건과학회지
• /
• 제10권1호
• /
• pp.1543-1552
• /
• 2022

Purpose: It is intended to investigate the satisfaction of dental hygiene students with non-face-to-face online classes and use them as basic data for successful lecture design and operation. Methods: The data collected in this study were analyzed using the lBM SPSS Statistics 21 program. The general characteristics of the study subjects were frequency analysis, non-face-to-face online class satisfaction, and test satisfaction were frequency analysis and technical statistics. Through the independent sample T test, a t-test was conducted to find out whether there was an average difference in online class and test satisfaction according to grade. Results: The advantages of non-face-to-face online classes were that repetitive learning was possible (57.7%), the disadvantage was that there was a lack of real-time communication (74.9%), and the most efficient teaching method was a mixed form of online and face-to-face classes (64.9%). The satisfaction level of online classes was 2.69 points for 'self-directed learning habits,' which was the highest compared to the overall average of 2.55 points, and 2.09 points for 'difficulty in interaction between instructors and learners in online classes.'Non-face-to-face test satisfaction was 2.68 points for 'short test time gives fairness to test results,' higher than the overall average of 2.45 points, and 2.07 points for 'no difficulty accessing the test.'In terms of satisfaction with the non-face-to-face test according to the grade, it was found that the third grade showed a more negative attitude than the second grade in terms of sexual fairness (p<0.05). Conclusions: Through the above results, non-face-to-face online classes require various content development and some mixed classes considering the level of students, and instructors' efforts to improve the quality of classes for interaction between instructors and learners are needed.

• 한국의류학회지
• /
• 제38권4호
• /
• pp.518-527
• /
• 2014

This study examined the effect of media involvement on appearance evaluation, appearance stress, and appearance management behavior. Data were collected from 315 female university students in Daejeon and Chungnam from May to June 2013. Data were analyzed by descriptive statistics, t-test, path analysis using the SPSS-WIN 20.0, AMOS 20.0 program. The results of this study were as follows. First, media involvement were classified into low and high groups. There were significant differences in appearance evaluation by level of involvement. The low group of media involvement indicated a more positive appearance evaluation than the high group. Second, there were significant differences in the appearance management behavior by level of involvement. Third, media involvement directly affected appearance evaluation and appearance management behavior. Appearance evaluation affected appearance stress and appearance management behavior. This study verified the structural relationship of media involvement, appearance stress, and appearance management behavior as outward behavior variables.

• Asian Journal of Business Environment
• /
• 제8권4호
• /
• pp.17-27
• /
• 2018

Purpose - Current study aimed at investigating the symbolic and evaluation relevance to global luxury brands as the causes of inducing social identity verification, and also explored whether the social identity verification will affect the attitude toward the brands. Research design, data, and methodology - 323 questionaries from Chinese consumers were used to test hypotheses by structural equation model of AMOS 22.0. Results - First, social identity verification positively affected on the brand attitude. Second, both the symbolic relevance and the evaluation relevance positively affected on social identity verification. Third, the mediation roles of social identity verification were identified. Social identity verification played a full mediation role in the effect of the symbolic relevance on the brand attitude, and played a partial mediation role in the effect of the evaluation relevance on the brand attitude. Conclusions - This study could contribute to the advancement of theory concerned with the roles of consumers' social identity verification which induces positive attitude toward the global luxury brands. Global brand managers in China should try to search ways by which consumers can feel both the symbolic relevance and evaluation relevance to their luxury brands, and should make efforts to improve the symbolic relevance and evaluation relevance to their brand.

• 유통과학연구
• /
• 제15권2호
• /
• pp.7-14
• /
• 2017

Purpose - This study attempts to extend the research in responsible luxury by identifying contexts where Corporate Social Responsibility (CSR) can promote luxury brands' evaluation. It contributes to the literature on consumer responses to CSR, and to responsible luxury in particular and demonstrates how dispositional consensus and luxury-CSR information of luxury brands affects consumers' evaluation of brand. Research design, data, and methodology - An experiment was conducted to test the relationship between brand evaluation and responsible luxury brands' CSR information using collected data through a survey in a large university of South Korea. Study conditions were manipulated with various product types to analyze the relationship in different product domains. Results - When consensus regarding sincere and altruistic motive of companies for CSR activity is high, the perceived fit between luxury brand and the type of CSR has no effect on brand evaluation. But, in case of lower consensus regarding the benevolent company motives, higher fit enhances evaluation than lower fit. Conclusions - In using consensus as a guiding factor to choose the type of charity with favorably view, the level of irrespective fit can help luxury firms to enjoy the benefits of better image. In case of low consensus donating to charities that are closely related to the brands' product or area of business seems to be fruitful.

• 한국생활과학회지
• /
• 제18권1호
• /
• pp.157-166
• /
• 2009

This study was conducted to evaluate the differences in external appearances and functional qualities between the slacks which were patterned on existing designs and on a new design in order to improve on their level of comfort of ready-made clothes for abdominally fat women. Five abdominally fat women in their 60's were chosen as experimental participants. Twenty-four external evaluation items, and seven different actions involving six moving parts of the body were investigated with a 5-level scale in the repeated wearing test. The results were analyzed by statistical methods. The newly designed pattern in this study was definitely superior to the other two patterns(L-type and K-type) on the external appearance evaluation. The newly pattern removed a waist belt and a dart from the front part of the garment and gave surplus space around the waist. It prevented superfluous wrinkles at the abdominal region and thighs. The superfluous wrinkles at the side regions also disappeared due to the length (inseam) reduction from waist to crotch. The newly pattern made the center-line of the back side slightly sloped to the main pattern in order to remove the drooped line. The newly pattern showed the highest score in the functional test of several actions. It was due to the reduction of the length from waist to crotch as well as the belt width. It made waist-line movement better, and made it easier and more comfortable to sit down. The newly pattern also showed the highest score in the functional test classified by specific movements of parts of the body for the same purpose. The slacks which were made of elastic materials showed better results than the non-elastic ones on external appearances and functional test items. It showed that the elastic materials played a better role in the increase of functional action of abdominally fat, aged women. This study suggests that the newly designed slacks pattern could give abdominally fat, aged women better external features and a more comfortable fitting sensation. As well, the results were significant as basic data to produce ready-made and/or tailer-made garments.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.349-358
• /
• 2004

A low pressure impactor is an impaction device to separate airborne particles into aerodynamic size classes at low pressure condition. We designed a two-stage low-pressure impactor to classify submicron sized environmental aerosols. Performance evaluation was carried out for stages 1 and 2 by using an electrical method. Monodisperse liquid dioctyl sebacate (DOS) particles were generated using evaporation-condensation process followed by electrostatic classification using a DMA (differential mobility analyzer). The test particles were in the range of 0.08∼0.8$\mu\textrm{m}$. For the evaluation of the impactor we used two electrometers; one was connected to the impaction plate of the impactor and the other was to the Faraday cage used as a backup filter. The effect of polydispersity of test aerosols on the performance was investigated. The results showed that the experimental 50-% cutoff diameters at each impactor's operation pressure were 0.53 and 0.187$\mu\textrm{m}$ for stages 1 and stage 2, respectively. The effects of operation pressure on the cutoff diameter and the steepness of collection efficiency curves were also investigated.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.345-350
• /
• 2000

The heat produced by the fission in the fuel of HANARO, 30 MW research reactor, is transferred from the primary cooling water to the secondary cooling water through heat exchangers, and the heat absorbed by the secondary cooling water is released into the atmosphere by the 33 MW cooling tower which is a mechanical induced draft and counter flow type. If the outlet temperature of cooling tower exceeds 33 of due to the loss of the cooling tower performance under reactor operation above $50\%$ of the full power, the reactor power should be reduced to half of the full power for safe operation. Therefore, the cooling capability of cooling tower should be maintained for the reactor to be normally operated. To predict the capability of cooling tower for full power reactor operation of 30 MW, the performance test of cooling tower was done at the reactor present power of 24 MW and the capability was respectively evaluated by characteristics and performance curves methods in accordance with the Code of Cooling Tower Institute of U.S.A. to confirm the reliability of evaluation. As a result, it was confirmed, through the results of each evaluation, that the cooling capability of cooling tower meets the design required heat load. Also, the equations of the performance and the characteristics curves of the cooling tower, based on the collected data during this performance test, was obtained for developing the calculation program to predict the cooling capability during reactor operation.