• Journal of the Korean Society for information Management
• /
• v.36 no.1
• /
• pp.31-52
• /
• 2019

The purpose of this study is to apply the Servicescape, which is used to measure the spatial services in marketing, to the studies on university libraries, in order to identify the influence of the library spaces and facilities on the satisfaction and continuance intention of the users of university libraries. For this purpose, questionnaires and in-depth interviews were conducted for users in ten private universities located in Seoul. Servicescape factors of the libraries showed that cleanliness, comfort, aesthetics, and convenience had a significant influence. Of these, convenience turned out to have the highest level of influence upon satisfaction, followed by cleanliness, aesthetics, and comfort. Descriptive statistical analysis showed whether there were significant differences in satisfaction and continuance intention based on the differences in the characteristics of the samples. Findings show that it would be necessary to provide spaces that can accommodate the various functions of a university library; seek advancement of the services; and develop the spaces of a library in consideration of cleanliness, comfort, aesthetic, and convenience. This study introduced the concept of Servicescape for the first time in the field of library and information science. This study implies that the results assist a more detailed analysis for the Library as Place dimension of LibQUAL+, and provide a new guideline for practitioners who design library spaces.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.127-136
• /
• 2019

Tunnel construction by TBMs should be supported by the performance of a screw conveyor in order to obtain the optimum penetration rate, so studies related to the screw conveyor performance have been being conducted. Compared to the study on the performance of the screw conveyor for the soil, however, the research on the performance of the screw conveyor for the rock is insufficient. Considering the domestic tunnel sites with more rock layers than soil layers, simulation of discharge of 6 types of rock chips by the screw conveyor was conducted using DEM. Regardless of the shape and volume of the rock chips, the discharge rates of the rock chips by the parallel placed screw conveyor at a speed of 10 RPM in the same rock mass were about 20% (standard deviation: 1.3%) of the maximum volume of discharge rate by the screw conveyor. It is expected that this study can be used as a reference material for screw conveyor design and operation in TBM excavations in rock masses.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.137-153
• /
• 2019

Estimating tunnel construction time and costs are the most fundamental part of a tunnel project planning, which has been generally assessed on a deterministic basis until now. In this paper, excavation cycle time was investigated for two road tunnels and one subway tunnel, and the results were compared with the Standard of Construction Estimate (SE), which is made for the estimation of construction time and cost in a design stage. The results show that the difference in cycle time between SE and actual cycle time is 50%, 7% and 31% respectively for the three tunnels, which means that SE does not reflect practical operation time. The major reasons of the difference are skilled level of tunneling workers, the change of operation sequences for more effective operations, much more complicated working atmosphere in a tunnel than the assumption of SE etc. Finally, even though the results can not be generalized since investigated tunnels are only 3, but it is thought that SE needs to be upgraded into the model able to consider quite common situations through additional tunnel investigation and studies in the future.

• The Journal of Internal Korean Medicine
• /
• v.40 no.1
• /
• pp.13-37
• /
• 2019

Objectives: The purpose of this study was to assess the effects of Korean medicine for non-alcoholic fatty liver disease (NAFLD). We analyzed the result of randomized controlled trials (RCTs) that applied Korean medicine to NAFLD patients through meta analysis and systematic review. Methods: The key question was to the effects of Korean medicine for NAFLD patients according to the PICO-SD (participants, intervention, comparison, outcome, study design) and we included only RCTs. We searched 10 databases including NDSL, KMBASE, KISS, KISTI, KoreaMed, Koreantk, OASIS, Cochrane, Pubmed, EMBASE without a language restriction. We assessed risk of bias by Cochrane group's Risk of Bias tool. Results: The finally selected 12 RCTs were analyzed. Total number of participants was 1189 (male 719, female 470) as 684 and 505 in the oriental medicine group (i.e. herbal drugs, acupuncture, acupoint embedding therapy) and control group (conventional drugs, placebo), respectively. The meta analysis results of examining 7 RCTs comparing the therapeutic efficacy of herbal medicine with that of Western medicine showed statistically significant (p<0.05) differences in the efficacy evaluation, liver function test results, blood lipids, and TNF-${\alpha}$. Furthermore, the meta analysis results of investigating 3 RCTs comparing the therapeutic efficacy of herbal medicine with that of a placebo showed statistically significant (p<0.05) differences in the liver function test results, blood lipids, and waist circumference. Conclusions: The research showed that Korean medicine for NAFLD can be effective treatment. But more studies are required to enhance the level of evidence and we should report on safety.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.29-33
• /
• 2019

With shrinking form factor and improving performance of electronic packages, high input/output (I/O) density is considered as an important factor. Fan out wafer-level packaging (FO-WLP) has been paid great attention as an alternative. However, FO-WLP is vulnerable to warpage during its manufacturing process. Minimizing warpage is essential for controlling production yield, and in turn, package reliability. While many studies investigated the effect of process and design parameters on warpage using finite element analysis, they did not take uncertainty into consideration. As parameters, including material properties, chip positions, have uncertainty from the point of manufacturing view, the uncertainty should be considered to reduce the gap between the results from the field and the finite element analysis. This paper focuses on the effect of uncertainty of Young's modulus of chip on fan-out wafer level packaging warpage using finite element analysis. It is assumed that Young's modulus of each chip follows the normal distribution. Simulation results show that the uncertainty of Young's modulus affects the maximum von Mises stress. As a result, it is necessary to control the uncertainty of Young's modulus of silicon chip since the maximum von Mises stress is a parameter related to the package reliability.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.76-84
• /
• 2019

Experimental studies using an open cone calorimeter were conducted to provide information on the CO and soot yields of wood combustibles required for a kitchen fire simulation of PBD. A total of eight specimens were examined for medium density fiberboard (MDF) and particle board (PB), which are used widely in kitchen furniture production, depending on the water content, surface processing method, and surface color. The thermal penetration time related to the fire spread rate in the depth direction differed significantly according to the surface processing treatment method, even for a specimen of identical thickness. The CO yield ($y_{CO}$) of the MDF and PB series did not change significantly according to the combustion mode and surface treatment process in flaming mode. On the other hand, $y_{CO}$ was approximately 10 times higher in smoldering mode than in flaming mode. The soot yield ($y_{soot}$), however, varied considerably depending on the combustion mode and surface treatment process. In particular, a higher $y_{soot}$ was found in flaming mode and in the surface-treated specimens. Finally, the $y_{CO}$ and $y_{soot}$ of MDF and PB measured for the kitchen fire simulation of PBD were applied.

• Journal of Life Science
• /
• v.29 no.5
• /
• pp.621-630
• /
• 2019

Fertilization is the beginning of a new life that occurs in the female uterine. The female reproductive tract is composed ovary, oviduct, uterine, vagina and cervix, their physiological features are regulated by estrous cycle. Of these, uterine is a main point to establish embryo development and implantation, and intercommunication between embryo and uterine environment is necessary for suitable pregnancy. Endometrium is part of the uterine, its morphology is repetitively changed by hormones, and characteristic of uterine fluid from endometrium is also changed. Recently, massive proteins of endometrium and uterine fluid can be detected according to develop proteomics and bioinformatics and have been accelerated the understanding of the reproductive biology fields. Moreover, the massive protein information is actively studying with deeply studied theory such as sex hormone signal pathway and angiogenesis in mammals. In this paper, we review understanding of endometrium remodeling, uterine gland and fluid during estrous cycle, additionally studies on endometrium and uterine fluid based on proteomics techniques. Lastly, we introduced methods of the protein-protein correlation using bioinformatics tool that interaction with hormone receptors, representative angiogenetic factors and detected proteins using proteomics in endometrium and uterine fluid. This review will be useful to understanding the study on search of new cell mechanism in endometrium and uterine fluid.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.32 no.2
• /
• pp.68-93
• /
• 2019

Objective : This study summarized the characteristics of clinical trials for atopic dermatitis medicines approved by the Ministry of Food and Drug Safety(MFDS). This study may be a reference for the design of clinical trials of atopic dermatitis herbal medicine treatment which may be carried out later. Method : The characteristics of the clinical trial were analyzed for clinical trials registered with ClinicalTrials.gov, CRIS, and the Korea Health Industry Development Institute among the clinical trial approval statuses posted on the website of the MFDS. Result : 1. Clinical trial drugs were developed in various formulations such as oral medicines, injections, dermatologic agents, and similar proportions. Relatively little clinical trials were found for herbal medicine. 2. In the control evaluation test, most of the treatments for the control group were performed with placebo using Vehicle. 3. In most clinical trials, one intervention group was in the form of a parallel assignment with only one treatment. 4. The age of the subjects was 11 out of 28 studies including minors, and clinical trials targeting minors were also found to be significant. 5. In the case of atopic dermatitis, the cases of subacute chronic or atopic dermatitis more than 6 months or more than 1 year were often used. 6. Most clinical trials were divided into mild to moderate atopic dermatitis or moderate to severe atopic dermatitis. The SCORAD index, EASI, IGA, BSA, and NRS were used as the evaluation criteria. 7. Regulations for the drugs used prior to the trial period for the treatment of atopic dermatitis vary somewhat from one clinical trial to another. 8. IGA was used most often as a primary efficacy tool, and SCORAD index, EASI, and NRS were also used.

• Physical Therapy Korea
• /
• v.26 no.2
• /
• pp.34-48
• /
• 2019

Background: Fall-related injuries in older adults are a major health problem, and the risks and mechanisms of these injuries should be affected by race, culture, living environment, and/or economic status. Objects: Research articles have been systematically reviewed to understand fall-related injuries in older adults in South Korea. Methods: 128 published research papers have been found through the Korea Citation Index and the Korean Studies Information Service System, and reviewed in various perspectives, including incidents, fall death rates, medical costs, causes, injury sites and types, locations where falls occurred, prevention strategies, scholarly fields interested in fall injuries, and the role of physical therapy. Results: Fall-related injuries were found to be more common in women than in men, and the number of incidents increased with age, with the highest rate found in individuals over 85 years old. Risk of fall injury was associated with education level, comorbidities, and fear of falling. Common places where falls occurred included the bathroom, living room, stairs, and hallway. Common types of injury included bruises, fractures, and sprains in the lower extremities. Intervention strategies included exercise programs, education, and protective clothing. Scholarly fields interested in fall-related injuries in older adults included medicine, nursing, physical therapy, occupational therapy, physical education, pharmacology, oriental medicine, biomedical engineering, design, clothing, and textiles. Physical therapy intervention using proprioceptive neuromuscular facilitation has been used to improve one's balance. Conclusion: Any movement during the activities of daily living can lead to a fall. Physical therapists are highly educated to analyze human movements and should be involved in more research and practices to solve fall-related injuries in older adults.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.99-109
• /
• 2018

Tampering involves illegally removing technologies from a protected system through reverse engineering or developing a system without proper authorization. As tampering of a weapon system is a threat to national security, anti-tampering measures are required. Precedent studies on anti-tampering have discussed the necessity, related trends, application cases, and recent cybersecurity-based or other protection methods. In a domestic situation, the Defense Technology Protection Act focuses on how to prevent technology leakage occurring in related organizations through personnel, facilities and information systems. Anti-tampering design needs to determine which technologies are protected while considering the effects of development cost and schedule. The objective of our study is to develop methods of how to select target technologies and determine counter-measures to protect these technologies. Specifically, an evaluation matrix was derived based on the risk analysis concept to select the protection of target technologies. Also, based on the concept of risk mitigation, the classification of anti-tampering techniques was performed according to its applicability and determination of application levels. Results of the case study revealed that the methods proposed can be systematically applied for anti-tampering in weapon system development.