• Title/Summary/Keyword: Design Space

Search Result 12,110, Processing Time 0.043 seconds

Assessment of Cutting Performance of a TBM Disc Cutter for Anisotropic Rock by Linear Cutting Test (선형절삭시험에 의한 이방성 암석에 대한 TBM 디스크커터 절삭 성능 평가 연구)

  • Jeong, Ho-Young;Jeon, Seok-Won;Cho, Jung-Woo;Chang, Soo-Ho;Bae, Gyu-Jin
    • Tunnel and Underground Space
    • /
    • v.21 no.6
    • /
    • pp.508-517
    • /
    • 2011
  • The linear cutting test is the most reliable and accurate approach to measuring cutting forces and cutting efficiency using full-size disc cutter in various rock types. The result of linear cutting tests can be used to obtain the key parameters of cutter-head design (i.e. optimum cutter spacing, cutter forces). In Korea, LCM (Linear Cutting Machine) tests have been performed for typical Korean rock types, but these studies focused on the isotropic rocktypes. For prediction of TBM (Tunnel Boring Machine) performances in complex geological conditions including a bedded and schistose rockmass, it is important to consider the effects of anisotropy of rockmass on cutting performances and cutting efficiency. This study discusses a series of LCM tests that were performed for Asan Gneiss having two types of anisotropy angles to assess the effect of the anisotropy angle on rock-cutting performances of TBM. The result shows that the rock-cutting performances and optimum cutting conditions are affected by anisotropy angle and the effect of anisotropy on rock strength should be considered in a prediction of the cutting performances and efficiency of TBM.

Worries and Reality Regarding Porous Asphalt Pavements: Structural Integrity, Flood Mitigation and Non-Point Pollution Reduction (투수성 아스팔트 포장에 대한 우려와 실제: 구조적 적합성, 홍수 완화 그리고 비점오염 저감)

  • Yoo, Inkyoon;Lee, Suhyung;Han, Daeseok;Lee, Sanghyuk
    • Ecology and Resilient Infrastructure
    • /
    • v.3 no.4
    • /
    • pp.272-278
    • /
    • 2016
  • Porous pavements are recommended as a Low-Impact Development (LID) method which is a strategy to develop a water cycle as close to a natural state as possible, and to solve the urban impervious surface problems. Porous pavements can yield a solution if it provides a more permeable surface with extra space to contain extra water from building roofs. But there are few applications in Korea because of a lack of recognition and experience. Highway engineers are mainly concerned about the infiltration of water into pavement structures. They worry about the weakening of the asphalt mixture and subgrade, and freezing during the winter season due to the infiltration of water. Meanwhile, hydrological experts doubt the effects of the amount of water to control during the flooding season, and environmental experts prefer a non-point pollution treatment system established beside highway. In this study, from reviewing the history and the body of literature about porous pavements, conclusions regarding the most advanced technologies were made. First, traditional thickness designs can be used for porous pavement, no extra distresses was found by weakening and freezing during the winter season. Second, hydrological design can be made by controlling the thickness of the pavement and the outlet of water. Third, the treatment efficiency of non-point pollution of porous pavements is not worse than any other method. Importantly, it's a more eco-friendly solution because of its lower requirement for de-icing agents.

Design of a Feature-based Spatial Data Management System for Digital Map (수치지도를 위한 피처 기반 공간자료 관리 시스템 설계)

  • Chi, Jeong-Hee;Kim, Seung-Kwan;Ryu, Keun-Ho;Kim, Myung-Jun
    • Journal of Korea Spatial Information System Society
    • /
    • v.7 no.3 s.15
    • /
    • pp.107-118
    • /
    • 2005
  • Various spatial data are utilized, through geographic information system, for the process to make a decision related to space. Generally, spatial data is large in quantity and it costs high and takes quite a long time for producing and maintaining it. An existing spatial data management system, tile-based one, for digital map manages spatial data being separated by a uniform data unit called tile. These systems can be implemented easily but have many problems such as they can directly store and manage feature included in tile. Therefore, in this paper, we suggest a feature-based spatial data management system for digital map. The proposed system is able to store and manage spatial data in the unit of feature directly. Hence this system is able to immediately update any change in the data and to supply users with the updated data without any delay. The proposed system can not only support a function of data input, management, supplying and update but also support unity origin coordinate conversion, UFID creation, feature unifying, feature dividing and metadata input which is not supported by the existing tile-based system. The proposed system can easily manage spatial data and can increase efficiency in processing and application.

  • PDF

Behavior Characteristics of Shear Connector for Composite Behavior of Steel Composite Columns (강합성 부재의 합성거동을 위한 전단 연결재의 거동 특성)

  • Won, Deok Hee;Han, Taek Hee;Kim, Seungjun;Lee, Jung Hwa;Kang, Young Jong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.4
    • /
    • pp.1993-1999
    • /
    • 2013
  • Steel composite structures have been studied in various areas such as bridges, high rise buildings, and wind towers. They show excellent structural performance through overcoming of the weaknesses of steel and concrete. Although various methods were already developed to achieve full composite behavior between steel and concrete in flexural members, the number of studies regarding composite columns is quite limited. If slip occurs between concrete and steel under external loads, the performance of the composite column would be reduced significantly. Connection methods ensuring full composite action between steel and concrete must be suggested. This paper investigated about structural behavior of shear studs through a series of experimental tests. Extensive parameters were also performed to understand the effects of the diameter of stud, space of stud and height of concrete. The present study provides fundamental bases for further development of design method of shear studs in composite columns.

A Study on Design Standards of a median strip in City considering Traffic Safety (교통안전을 고려한 도심형 중앙분리대 설치기준 마련에 관한 연구)

  • Kim, Jong-Min;Kim, Jang-Wook;Noh, Kwan-Sub;Kim, Kyung-Tae
    • International Journal of Highway Engineering
    • /
    • v.14 no.1
    • /
    • pp.35-43
    • /
    • 2012
  • The Government is implementing the safety measures for pedestrian in living zone to decrease the traffic accident casualties in half. It is urgently to study the guideline because it contains to make the guideline of a median strip in City to prevent the violation of central line and jaywalking on the main contents. So, this study analyzed the pedestrian accidents and the violation of central line, and studied the type of a median strip, the installation guideline through studying the minimum crossing. Consequently, this study found out that a median strip which revised the attention inducement stick to decrease jaywalking could not have the strong prevention function of a crash barrier, so if it happens separation after the collision between vehicles, it induced the secondary accidents, and could take negative effects on traffic safety. In consideration of driving safety, this study analyzed that if it installs a median stirp, it has to ensure one meter, and such a thing could prevent the separation of lane or damage of facilities. However, if it is hard to ensure the space because of narrow road width, it could install a median strip in case of installing the road surface mark 0.5m. And the installation of the attention inducement stick or a median strip on the central line could be possible to induce the violation of central line, thus it is desirable not to install only anythings but also raised pavement markers.

Mechanical Stability Analysis to Determine the Optimum Aspect Ratio of Rock Caverns for Thermal Energy Storage (열에너지 저장용 암반 공동의 최적 종횡비 결정을 위한 역학적 안정성 해석)

  • Park, Dohyun;Ryu, Dongwoo;Choi, Byung-Hee;Sunwoo, Choon;Han, Kong-Chang
    • Tunnel and Underground Space
    • /
    • v.23 no.2
    • /
    • pp.150-159
    • /
    • 2013
  • It is generally well known that the stratification of thermal energy in heat stores can be improved by increasing the aspect ratio (the height-to-width ratio) of the stores. Accordingly, it will be desirable to apply a high aspect ratio so as to demonstrate the good thermal performance of heat stores. However, as the aspect ratio of a store increases, the height of the store become larger compared to its width, which may be unfavorable for the structural stability of the store. Therefore, to determine an optimum aspect ratio of heat stores, a quantitative mechanical stability assessment should be performed in addition to thermal performance evaluations. In the present study, we numerically investigated the mechanical stability of silo-shaped rock caverns for underground thermal energy storage at different aspect ratios. The applied aspect ratios ranged from 1 to 6 and the mechanical stability was examined based on factor of safety using a shear strength reduction method. The results from the present study showed that the factor of safety of rock caverns tended to decrease with the increase in aspect ratio and the stress ratio of the surrounding rock mass was influential to the stability of the caverns. In addition, the numerical results demonstrated that under the same conditions of rock mass properties and aspect ratio, mechanical stability could be improved by the reduction in cavern size (storage volume), which indicates that one can design high-aspect-ratio rock caverns by dividing a single large cavern into multiple small caverns.

Development of Criteria for Determining Level of Service for Pedestrian Walkway Considering a Pedestrian Platoon: Focusing on the Hongik University Area (보행 특성을 고려한 보행자 서비스수준 평가지표 개발: 홍익대학교 주변지역을 대상으로)

  • CHOI, Sung Taek;CHOO, Sang Ho;JEON, Na Yeong
    • Journal of Korean Society of Transportation
    • /
    • v.34 no.2
    • /
    • pp.191-206
    • /
    • 2016
  • Pedestrian performance measurement has generally used the average values of pedestrian volumes and speeds from a sample, although each individual's pedestrian behavior of the sample is mainly affected by his/her socio-economic and physical characteristics. In particular, if such individual characteristics of the sample have wide variations, the average values are hard to be representative. In this respect, this study found that a platoon of pedestrians had a major effect on their pedestrian flows on sidewalks. The more platoons was mixed on pedestrian roads, the lower pedestrian flow rate was. The indexes such as a pedestrian flow rate and an occupancy space are typically calculated by pedestrian volumes in a given period of time regardless of the existence of a platoon. However, it is plausible that a pedestrian speed and a level of pedestrian congestion can be different under the equal amount of pedestrian volumes. Therefore, this study suggested criteria for determining level of service for pedestrian considering platoon effects and confirmed that two places had different pedestrian LOSs because of the platoon effects, even if they showed the same pedestrian flow rate.

The Influence of Arshile Gorky's & Jackson Pollock's Painting on Modern Fashion (Arshile Gorky와 Jackson Pollock의 Painting이 현대의상 직물 문양에 미친 영향)

  • Chung Heungsook Grace
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.16 no.3 s.43
    • /
    • pp.197-207
    • /
    • 1992
  • Expressionism, is as diverse as the artists invo)ved, in a very broad sense two main tendencies may be noted. The first is that of the Action painters, concerned in different ways with the gesture of the brush and the texture of the paint. It included such major artists as Arshile Gorky, Jackson Pollock, Willem De Keening, and Franz Kline. The other group consisted of the Color Field painters, concerned with the statement of an abstract sign or tranquil image in terms of a large, unified color shape or area. Here must be included Mark Rothko, Barnett Newman, Ad Rdinhardt, as well as, to a degree, Adolph Gottlieb, Robert Motherwell, and Clyf(ord Still. In this paper, 1 selected two artists Arshile Gorky and Jackson Pollock independent charac-teristics and studied the influence of their Action painting on the fabrics of modern fashion. However, it should be noted it was never the intention of the critic Harold Rosenberg, in coining this term, to imply that Action painting was a kind of athletic exercise. Nor is it true that the furious and seemingly haphazard scattering of the paint involved a completely uncontrolled, intuitive act. There is no question that, in the paintings of Jackson Pollock, Arshile Gorky and many of the other Abstract Expressionists, the element of intuition or the accidental plays a large and deliberate part; this was indeed one of the principal contributions of Abstract Expressionism which had found its own inspiration in surrealism's 'psychic automaton'. However, nothing that an experienced and accomplished artist does can be completely accidental. Aside from their intrinsic quality, the spun-out skeins of poured pigments contributed other elements that changed the course of modern painting. There was the concept of the all-over painting, the painting seemingly without beginning or end, extending to the very limits of the canvas and implying an extension even beyond. The feeling of absorption or participation is heightened by the ambiguity of the picture space. The colors and lines, although never punctur-ing deep perspective holes in the surface, still create an illusion of continuous movement, a billowing, a surging back and forth, within a limited depth. To study the influence of Abstract Expressionism on the fabric of modern fashion, 1 selected and examined four fashion magazines: Collezioni published in France, Bazaar in Italy, Gap in Japan and Vogue in the U.S.a. froim January 1989 to June 1991. As a result of this review I found that some fabrics used in modern clothing are printed in a dripping, pouring and splashing style without any meaning or form. Slides included in the presentation show that modern fabrics which are printed in such a style were influenced by Abstract Expressionism. The slides also show that these abstract prints are well suited to modern fashion design.

  • PDF

The Conditions for Wearing and Purchasing Brassieres by Korean Women - Based on the Female College Students in their Early 20's - (한국 성인여성의 브래지어 착용 및 구매실태 조사연구 - 20대 전반 여대생을 중심으로 -)

  • Cha, Su-Joung;Sohn, Hee-Soon
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.34 no.2
    • /
    • pp.303-317
    • /
    • 2010
  • This study helps in the production of brassieres suitable for female adults by researching the actual wearing conditions and purchasing status, satisfaction rate, and preferences of female college students in their early 20's. The collected data was analyzed by a SPSSWIN 13.0 Program and the results of the research are as follows. 1. There is a noticeable difference between the breast satisfaction rate and breast size, in addition the satisfactory rate was higher in the normal breast size or a little ample size than in the very small or very big size. According to the shape, the satisfactory rate for the breast appeared to be high in the case of the recognition and evaluation of the hemisphere type than the flat, cone, pop out, and downward type. 2. For fitness, the looseness at the top of the cup (pressed between the breasts at the upper part of the front middle), pressing and looseness at the upper sides of the cup, inappropriate size of the cup, tightness of the wings, tightness at the bottom round of the breasts, the narrow width of the wire, wide space of the shoulder strings, and the sliding of the shoulder strings had problems that needed improvement. 3. The major priorities for purchasing brassieres are size, fitness, and aesthetic qualities. As a result, the size and the fitness are more important than the trend or decorations since the brassiere has the function to support the breasts that shows that hygiene and sanitation are recognized as an important standard for undergarment selection. The size and the fitness are important factors regardless of breast types in the examination of the selection standards of the brassieres for each breast type, but the cone and hemisphere types have higher preferences for design; the pop out type has more considerations for the material of the cloth. The result show that appearance is more important for smaller breasts, but the functionality of the brassier is more important than the appearance for medium and larger breast sizes.

Living Conditions of the Rural Elderly: Clothing, Nutrition, Housing, and Psychological Adjustment (농촌지역 노인의 생활실태 조사연구 -의.식.주생활 및 심리적 적응을 중심으로-)

  • 윤복자
    • Journal of the Korean Home Economics Association
    • /
    • v.28 no.4
    • /
    • pp.65-86
    • /
    • 1990
  • Living conditions of the rural elderly were assessed in terms of clothing behavior, health and nutritional status, housing and envioronmental condition, and psychological adjustment. The subjects were eighty individuals over sixty residing in the rural community of Iksan-kun, Chollabukdo. The interview method using questionnaires, direct measurement, and observation was used for this study. Data were compared with those obtained from a previous study of the elderly residing in an urban area. Clothing behavior showed that the elderly residing in the rural community were more concerned about plain and conservative design of clothes than their urban counterparts. Special protective clothes for cropdusting with agricultural chemicals had not been prepared. The following urgent needs were pointed out: development and supply of agricultural chemical protective clothing and development and education of appropriate washing and clothing care methods. The health status of the elderly was generally good, but poor eating habits were found more frequently in the rural elderly than among the urban dwellers. Several dietary nutrient intakes were insufficient. Contrasting the urban elderly with the rural group, it was found that the urban group lacked sufficient vitamin A and vitamin C and the urban women had insufficient calorie whereas the rural group was deficient in protein, vitamin A, calorie, and fat. A significant relationship was found between dietary nutrient intake and health index, food habit points, self recognized health status, meal satisfaction, and economic status. Urgent needs of the development of a nutrition education program for the elderly were pointed out. Most of elderly residing in the surveyed rural communities were living alone or with their spouse only, therefore only one room was used among the three or four available rooms. Most of the rural elderly were living either in a traditional Korean house built with differing floor levels or in a modified Korean style house. Minimal modernization had been made for kitchen facilities such as sink and gas range or for heating facilities with the briquette boiler. However, sanitary space such as lavatory and bathroom had not been remodeled. A housing welfare program for rural communities should be implemented at the national level. The comparison of psychological characteristics of the rural elderly with their city counterparts revealed that the rural elderly have a more stable psychological status and optimistic attitude than those living in a city. However, it was found that most of the elderly did not have any future plan. Community programs for the elderly including hobbies or leisure activities or education programs to generate close interpersonal relationships with their children should be developed and provided.

  • PDF