• 한국정보교육학회:학술대회논문집
• /
• 2011.01a
• /
• pp.219-226
• /
• 2011

The purpose of this paper is to design improving electronic notetaking interface on pen-based learning contents. For this study, we apply requirement analysis which includes heuristic analysis, conceptual mapping, surveying, and derive the functional requirements. After functional requirements process, we design a persona, scenario, storyboard and wireframe. By making a paper prototyping from wireframe, maternalize the improving electronic notetaking interface, and assess the usability test. Through the assessment, compensate the defect and complete the design

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.159-169
• /
• 2016

In order to realize the virtual prototyping (VP) of digital products, it is important to provide the people involved in product development with the appropriate visualization and interaction of the products, and the vivid simulation of user interface (UI) behaviors in an interactive 3D virtual environment. In this paper, we propose an approach to web-based 3D virtual experience using Unity and Leap Motion. We adopt Unity as an implementation platform which easily and rapidly implements the visualization of the products and the design and simulation of their UI behaviors, and allows remote users to get an easy access to the virtual environment. Additionally, we combine Leap Motion with Unity to embody natural and immersive interaction using the user's hand gesture. Based on the proposed approach, we have developed a testbed system for web-based 3D virtual experience and applied it for the design evaluation of various digital products. Button selection test was done to investigate the quality of the interaction using Leap Motion, and a preliminary user study was also performed to show the usefulness of the proposed approach.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.151-156
• /
• 2016

The IoT technology and sensors used for collecting the environment information has rapidly increased the number and type. With the increasing need for this type of sensor effective system for selecting and testing the sensor nodes for the IoT to develop products and services. In this study, we design and implement IoT sensor testing system for IoT service and product. In order to support rapid prototyping, the proposed system provides testing and management tools for IoT sensor nodes. We analyze the requirements of the proposed system and design the system based on the functional component-specific design. Finally, we implement testing application to verify the functional elements of the proposed system.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.203-208
• /
• 2006

디자인의 여러 프로세스중 중요 행위는 사용자가 바라는 점을 파악하여, 제안하는 행위 중심으로 이루어진다. 사용자의 니즈를 파악하는데 있어, 사용성 평가를 활용하면, 논리적이고, 구체적인 불편요소를 파악하는데 도움을 받을 수 있다. 또한, 디자인 개선안의 효용성을 파악하는데도 디자이너에게 유용한 디자인 개발 프로세스로 자리 잡았다. 사용성 평가를 통해 사용자의 불편요소를 파악하는 방법으로는 크게 두가지 방법이 있는데, 하나는 데스크 탑 컴퓨터를 활용한 시뮬레이션 기법을 들수 있고 다른 하나는 모바일 폰을 활용하는 모습을 직접 촬영하여, 분석하는 방법을 들 수 있다. 데스크 탑 컴퓨터를 활용한 시뮬레이션 기법은 화면의 해상도와 인터렉션 방법이 상이하고, 직접 촬영 방법의 경우, 피 시험자가 카메라를 의식하거나, 분석상에 연구자의 바이어스가 개입할 여지가 많아 각각의 단점이 있다. 본 연구에서는 디자이너가 해결안을 프로토타이핑 하는 방법으로 모바일 폰의 프로세서를 활용한 로그를 남기는 방법으로 사용성 평가를 진행할 수 있는 도구를 만들고 이를 통한 사용성 평가 기법의 방안을 제안하였다. Mobile phone 의 Software User Interface 의 개선안을 검증할 수 있는 툴로 제작된 Interactive Mobile Phone Logger 라는 프로그램을Visual Basic 과 JAVA를 이용하여 개발하였다. 이를 활용하면, 디자이너의 해결안을 자동으로 JAVA Class 파일의 패키지로 생성해주고, 서버를 이용하여 패키지를 전송, JAVA를 지원하는 모바일 폰이면 어떠한 모델이든 실험에 참가할 수 있도록 제작 되어있다. 또한, 실험의 결과 데이터는 종료시 자동으로 실험자의 서버를 통해 분석될 수있도록 제작되었다.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.39-47
• /
• 2016

We conducted a multi-stage optimization to secure the desired performance of a centrifugal fan for home appliance in an early stage of product development. In optimization, the static pressure at the outlet of the fan is chosen as an objective function that is to be maximized, providing the required flow rate at the operating point of the fan. The optimization procedure begins with parameters for an initial baseline fan design. The baseline design is optimized by using a commercial optimization package. Accordingly, the corresponding blade models with a set of geometrical parameters are generated. Flow through a fan is simulated by solving the Reynolds-averaged Navier-Stokes equations. A multi-stage optimization scheme is employed to determine the family of optimum values for the parameters, leading to the pressure increase at the outlet of the fan. To validate the numerically obtained optimal design parameters, we fabricated the three types of fans using rapid prototyping and assessed the performance using a fan tester. Experimental results show that the design parameters at each stage satisfy the goal of optimization. The multi-stage optimization process turned out to be a useful tool in the development of a centrifugal fan.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.108-113
• /
• 2020

Pinions are generally heavy and integrated with a shaft. Thus, fabricating a pinion is a material- and machining-intensive task characterized by low productivity. Contact of the output pinion with a sliding surface or a cloud contact causes loss of power because of friction. Consequently, the output pinion undergoes considerable wear and tear at its ends, which adversely affects the overall transmission efficiency of decelerators. To improve transmission efficiency and extend gear life, an optimum output pinion design is required. To this end, in this study, an output pinion for worm gear decelerators was designed and optimized by means of product verification through prototyping and performance evaluation to improve gear life and productivity. The optimized design was validated and subjected to structural analysis.

• Smart Structures and Systems
• /
• v.24 no.2
• /
• pp.223-231
• /
• 2019

The properties of Electroactive Polymer (EAP) materials are attracting the attention of engineers and scientists from many different disciplines. From the point-of-view of robotics, Ionic Polymer Metal Composites (IPMC) belong to the most developed group of the EAP class. To allow effective design of IPMC-actuated mechanisms with large induced strains, it is necessary to have adequate analytical tools for predicting the behavior of IPMC actuators as well as simulating their response as part of prototyping methodologies. This paper presents a novel IPMC motor construction. To simulate the bending behavior that is the dominant phenomenon of motor movement process, a nonlinear model is used. To accomplish the motor design, the IPMC model was identified via a series of experiments. In the proposed model, the curvature output and current transient fields accurately track the measured responses, which is verified by measurements. In this research, a three-dimensional Finite Element Method (FEM) model of the IPMC motor, composed of IPMC actuators, simultaneously determines the mechanical and electrical characteristics of the device and achieves reliable analysis results. The principle of the proposed drive and the output signals are illustrated in this paper. The proposed modelling approach can be used to design a variety of controllers and motors for effective micro-robotic applications, where soft and complex motion are required.

• Wind and Structures
• /
• v.28 no.5
• /
• pp.271-284
• /
• 2019

This paper describes the application of a novel virtual prototyping methodology to wind turbine blade design. Numeric modelling data and experimental data about turbine blade geometry and structural/dynamical behaviour are combined to obtain an affordable digital twin model useful in reducing the undesirable uncertainties during the entire turbine lifecycle. Moreover, this model can be used to track and predict blade structural changes, due for example to structural damage, and to assess its remaining life. A new interactive and recursive process is proposed. It includes CAD geometry generation and finite element analyses, combined with experimental data gathered from the structural testing of a new generation wind turbine blade. The goal of the research is to show how the unique features of a complex wind turbine blade are considered in the virtual model updating process, fully exploiting the computational capabilities available to the designer in modern engineering. A composite Sandia National Laboratories Blade System Design Study (BSDS) turbine blade is used to exemplify the proposed process. Static, modal and fatigue experimental testing are conducted at Clarkson University Blade Test Facility. A digital model was created and updated to conform to all the information available from experimental testing. When an updated virtual digital model is available the performance of the blade during operation can be assessed with higher confidence.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.249-257
• /
• 2013

Rapid prototyping was used to design and develop a three-dimensional (3D) scaffold for tissue engineering application. In this study, the nozzle guide (TB-CP-HN, MUSASHI ENGINEERING, INC., JAPAN) used with the syringe of the polymer deposition system (PDS) was evaluated by measuring the scaffold line width and height. 3D scaffolds were fabricated using a biodegradable polymer called poly-caprolactone (PCL). The PCL polymer can be deposited from the needle of a syringe using a 200-${\mu}m$ precision nozzle, at a pressure of 600 kPa and temperature of $125^{\circ}C$. The advantages and improvements in this nozzle guide were addressed through washer scaffold fabrication. Overall, this research indicated that the fabrication of a complex-shaped scaffold using an enhanced polymer deposition system may have potential for tissue engineering.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2170-2174
• /
• 2005

Selective Laser Sintering (SLS) is a useful rapid prototyping technique for the manufacture of three dimensional (3D) solid objects directly from a scanning data. A new approach called a Selective Multi-Laser Sintering (SMLS) system has been developed at Korea Institute Machinery & Materials (KIMM) as an industrial type SFFS. This SMLS machine is built with a frame, heaters, nitrogen supply part, laser system. This system uses the dual laser and 3D scanner made in $Solutionix^{TM}$ to improve the precision and speed for large objects. The three-dimensional solid objects are made of polyamide powder. The investigation on each part of SMLS system is performed to determine the proper theirs design and the effect of experimental parameters on making the 3D objects. The temperature of the system has a great influence on sintering the polymer. Because the stability of the powder temperature prevents the deformation of each layer, the controls of the temperature in both the system and the powders are very important during the process. Therefore, we simulated the temperature distribution of build room using the temperature analysis with ANSYS program. Selected radiant heater is used to raise temperature of powder to melting point temperature. The laser parameters such as scan spacing, scan speed, laser power and laser delay time affect the production the 3D objects too. The combination of the slow scan speed and the high laser power shows the good results without the layer curling. The work is under way to evaluate the effect of experimental parameters on process and to produce the various objects. We are going to experiment continuously to improve the size accuracy and surface roughness.