• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.1
• /
• pp.64-72
• /
• 2001

This paper is on a design of the high-speed cipher IC using IDEA algorithm. The chip is consists of six functional blocks. The principal blocks are encryption and decryption key generator, input data circuit, encryption processor, output data circuit, operation mode controller. In subkey generator, the design goal is rather decrease of its area than increase of its computation speed. On the other hand, the design of encryption processor is focused on rather increase of its computation speed than decrease of its area. Therefore, the pipeline architecture for repeated processing and the modular multiplier for improving computation speed are adopted. Specially, there are used the carry select adder and modified Booth algorithm to increase its computation speed at modular multiplier. To input the data by 8-bit, 16-bit, 32-bit according to the operation mode, it is designed so that buffer shifts by 8-bit, 16-bit, 32-bit. As a result of simulation by 0.25 $\mu\textrm{m}$ process, this IC has achieved the throughput of 1Gbps in addition to its small area, and used 12,000gates in implementing the algorithm.

• Journal of the Korean Institute of Navigation
• /
• v.6 no.1
• /
• pp.1-18
• /
• 1982

In this paper, author studied on the elementary data required for the design of the receiver of Pseudo Noise (PN) phase modulation communication adopted in Global Positioning System(GPS). By computer simulation technique, the phase modulator, filters, and PN generator are designed, and also required bandwidth of R-F amplifier for carrier frequency in phase modulation system is investigated. It is verified that the optimum bandwidth is about 3 times of the PN frequency and almost independent of the carrier frequency. And the low pass filter required for demodulation of slow Boolean data is also found to be about 60 times of the data signal frequency.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.792-795
• /
• 1999

Since the inception of fuzzy control, lots of methods to design fuzzy controller have been reported, However, it is admitted that these methods are tailored to special problems and cannot be used in general control situation. Therefore this paper proposes auromatic generation algorithm of fuzzy control system and develops an automatic fuzzy controller generator. For that purpose, the genetic algorithm is used and it searches for the optimal parameters to design the fuzzy controller

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.275-275
• /
• 2000

This paper designs a digital correlator for the integrated GPS/GLONASS receiver consisting of DCO, carrier cycle counter, code generator, code phase counter, mixer, epoch counter, accumulator. It is designed using Verilog-HDL(Verilog-Hardware Description Language) and synthesized using EDA(Electronic Design Automation) tools. The performance of the designed digital correlator is verified by the functional simulation and real satellite tracking experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.42-46
• /
• 2003

In this study, to measure the moisture of compaction, it is designed to use the 2neutron detectors. To perform the optimal design of their circuit, it is planned high voltage generator and voltage stable circuit and they are very suitable for detection demand. Also, it can be count to data calibration excluded count of ripple.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.260-266
• /
• 2015

Twenty sodium-cooled fast reactors (SFRs) have provided valuable experience in design, licensing, and operation. This paper summarizes the important safety criteria and safety guidelines of intermediate sodium systems, steam generators, decay heat removal systems and associated construction materials and in-service inspection. The safety criteria and guidelines provide a sufficient framework for design and licensing, in particular by new entrants in SFRs.

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.47-48
• /
• 1985

This paper is concerned with the problem of designing satisfactory low-order controller starting with a high-order, state space model. The success of a design approach is rooted in the Choice of a model reduction procedure. The powerful new reduction method of a modal approach was already evaluated /1/. Application of the technique to a simulated steam generator is demonstrated for the case of modal control with low-order controllers.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.12
• /
• pp.472-484
• /
• 1985

A design of robust voltage controller for high speed excitation of synchronous machine was carried out by pole assignment techniques. An affine map from characteristic polynomial coefficients to feedback parameters is formulated in order to place the system eigen values in the desired region. The feedback parameters determined from linearized model are tested on nonlinear model subjecting it to small disturbances and system faults to show the effectiveness of the controller designed by the proposed technique. The results obtained indicate that the controller presented improves the dynamic stability and system performances of conventionally controlled synchronous machine significantly.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.321-322
• /
• 2015

Thermoelectric power generation has emerged as a promising alternative technology because it offers a potential application in the direct conversion of waste heat into electric energy. The performance of thermoelectric power generator depends on thermoelectric materials and thermoelectric power module designs. The main objective of this study is to design a 100W thermoelectric generation (TEG) module and to get optimal operating conditions of the module. The design and performance of the TEG module will be presented.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.6
• /
• pp.187-196
• /
• 2001

In this study, by using the natural language processing of the field of artificial intelligence, automated index was performed. And then, the Natural Language Processing Interface for knowledge representation(NALPI) has been developed. Furthermore, the DEsign KnOwledge DataBase(DEKODB) has been also developed, which is designed to interlock the knowledge base. The DEKODB processes both the documented design-data, like a concrete standard specification, and the design knowledge from an expert. The DEKODB is also simulates the design space of structures accordance with the production rule, and thus it is determined that DEKODB can be used as a engine to retrieve new knowledge and to implement knowledge base that is necessary to the development of automatic design system. The application field of the system, which has been developed in this study, can be expanded by supplement of the design knowledge at DEKODB and developing dictionaries for foreign languages. Furthermore, the perfect automation at the data accumulation and development of the automatic rule generator should benefit the unified design automation.