• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1054-1060
• /
• 2013

Fuel tank of a rotorcraft has a great influence on the survivability of crews. For a long time, US army has tried to develop the proper material for fuel cell of a military rotorcraft. As a result, the design specification of fuel cell, MIL-T-27422A, was issued for the first time on 1961. Through a few revisions, it has been developed to ML-DTL-27422D in 2007. It should be assured that fuel cell satisfies the requirement defined in MIL-DTL-27422D. The qualification test of this specification is classified into Phase I test for material and Phase II for fuel cell itself. This paper studies test conditions and procedures of slosh & vibration, gunfire resistance and crash impact test. They are considered as the most important tests which have a high possibility of failure. The rational consideration of this paper can improve the ability for estimating not only the validity of test procedure and test condition but test result. Based on the rational consideration, it is expected that the ability of the systematic development can be improved.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.199-206
• /
• 2006

Today the harbor oscillation problems are the most significant factor to design harbors serving the very large ships. Large vessels moored in the elastic hawsers at the coastal harbors are often displaced due to the resonance between the long period waves and mooring system. The cargo handling may be interrupted and the hawsers may be broken, especially when the amplification becomes remarkable. The most significant harbor which is confronted with harbor oscillation problem in Korea is the Pohang New Port. Many cases of problems are being notified by the pilot association and local office of MOMAF. However, it is difficult to prevent the arrival of long waves causing oscillation within this harbor. Moreover, Government already started new port plan at the mouth of YoungIl Bay without treating problems occurred in the Pohang New Port. This study deals with the variation of harbor oscillation due to the construction of 4.1km breakwater at the bay mouth and new port plan. Numerical method used are fairly standard form from the extended mild slope equation. The obtained numerical results were compared with the field measurement from the previous study and this will bring a certain level of discussion and consideration of variation in the future port development.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.5-22
• /
• 2002

With the rapid advance of internet service and the corresponding migration of service environment from the text-based one to WWW (World Wide Web) environment, the number of internet users is growing rapidly due to its easy usage. Accordingly, usage of internet as services for sending electronic mails to the other party over the network is becoming increasingly prevalent. Web-based electronic mailing system is comprised of a server and a client. The former provides the users with e-mail accounts and services, while the latter serves as a user interface. In other words, it enables those public users who dos not own e-mail accounts on the existing mail server to have an access to the mailing service through the web. In this paper, we designed a effective web-based electronic mailing system which is based on the internet explorer and linux operating system, which overcomes limitations of the existing e-mail systems and meets the need of a cost-efficient alternative. Our electronic mailing system also supports the convenience of users through appropriate handling of preregistered spam e-mails and multiple e-mails, and this facilitates the development of a stable e-mail system by being able to avoiding the low system performance due to the bursty characteristics of e-mail messages and the increasing number of users

• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.387-396
• /
• 2013

Non-point pollution source is difficult to control due to uncertain outflow path and emission. So, There are many development and research to Best Management Practices(BMP) established to manage the Non-point pollution source. Besides, various methods of estimated efficiency to exact assessment of BMP is presented. In this study, the impact about length of Grassed Swale on reduction efficiency based on monitoring results of Grassed Swale by length is studied. By estimating Grassed Swale reduction efficiency in a variety of methods, the difference between the methods of estimated efficiency was compared with those that. Estimated efficiency method using ER, SOL, ROL, ROF, SOLF, and ROLF methods is analyzed. EMC analysis result is high inflow and outflow concentration distinction organic compound for nutritive salts The result of efficiency analysis along Grassed Swale length sharply increases in a Grassed Swale inlet. After this increase, the efficiency gradually decreases. This is expected that cistern installed in the end of the front. To obtain a stable reduction efficiency of Grassed Swale, minimum length 30m of Grassed Swale should be enough. Also, in order to efficiently and economically design Grassed Swale, the researches on length of Grassed Swale are needed rather than simple analysis of efficiency.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.175-179
• /
• 1997

bliniaturization oi microwave circuit components is an important issue with the development in the mobile communication. Capacitors, inductors anti hybrid devices of these are building blocks of electric circuits, and the fabrication of these devices using thin film technology will influence on the miniaturization of electronic devices In this paper, we report the successful fabrication of the inductors, capacitors and LC hybrid devices using a ferroelectric and a ferromagnetic oxide thin iilm. Au, stable at high temperatures in oxidizing ambient, is patterned by lift-off process, and oxide thin films are deposited by ion beam sputtering and chemical vapor deposition. These devices are characterized by a network analyzer in 0.5-15GtIz range We got the inductance of 5nH, capacitance oi 10, 000 pF and resonant frequencies of $10^{6}-10^{9}Hz$.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.139-149
• /
• 2012

Black garlic and Gaeddongssuk (Artemisia annua L.) were extracted using central composite design by response surface methodology (RSM) in 11 conditions (A~K) with $110{\sim}130^{\circ}C$ and 2~4 hr, and then each extracts were monitored for the total phenol, flavonoid contents and antioxidant activities. The optimum extraction conditions for black garlic and Gaeddongssuk are selected 3 conditions ($130^{\circ}C$, 4 hr; $120^{\circ}C$, 3 hr; $130^{\circ}C$, 3 hr) and 1 condition ($120^{\circ}C$, 3 hr), respectively. They were mixed according to the following ratio; 1:0.5, 1:1, 1:1.5 and 1:2 (black garlic: Gaeddongssuk extract, w/w), and then these composites were tested to the total phenol, flavonoid contents and antioxidant activities. Antioxidant activities of black garlic and Gaeddongssuk extracts by $120^{\circ}C$, 3 hr condition were higher. And the optimal mixture ratio of black garlic and Gaeddongssuk was 1:1.5 (w/w).

• Korean Journal of Social Welfare Studies
• /
• v.40 no.3
• /
• pp.181-211
• /
• 2009

Asian Americans are one of the fastest growing minority groups in the United States. One of the stereotypes associated with Asians is that they are more likely to choose careers in science, medicine, and engineering rather than social science, inclusive of social work, mass communication, or humanities (Leong & Serafica, 1995; Tang et al., 1999). This occupational stereotyping of Asians is not just a myth in that only a few Asians choose social work as a career (Lennon, 2005; NASW, 2006). Few studies exist on Asian Americans who do not choose Asian stereotypical career choices, such as social work. Acknowledging this lack of research, the present study was developed to explore the relationships between factors that may influence Asian Americans who choose social work as their career. Based on Social Cognitive Career Theory (Lent, Brown, & Hackett, 1994), it was hypothesized that acculturation and family immigration status influenced parental involvement, disapproval by significant others as a perceived career barrier among Asian American social workers. A cross-sectional survey design was used in this study. The sample was derived from the members'database of the National Association of Social Workers (NASW). A total of 900 were randomly chosen among 1,802 of Asian American social workers in the NASW database, and 370 Asian American social workers participated in this study with 41 percent of a return rate. Quantitative data were collected through standardized measurements: Suinn-Lew Asian Self-Identity Acculturation Scale (Suinn, Rickard-Figueroa, Lew, & Vigil, 1987); Career Barriers Inventory Revised (Swanson, et al., 1996); and eight items from Tang et al.'s (1999) Asian American Career Development Questionnaire. The data were collected through a combined method of an online survey with option of a paper mail-return questionnaire. Results of the study found significant group differences among family immigration status groups on parental involvement, and perceived likelihood and hindrance of disapproval by significant others. The group of the 2nd generation reported the highest scores of parental involvement among the family immigration status groups. Also, Asian American social workers who represented the 3rd and higher generation of immigration reported lowest perceived likelihood and hindrance scores of disapproval by significant others. However, there was no significant multivariate effect of acculturation on parental involvement, and perceived likelihood and hindrance of disapproval by significant others. Implications and limitations of this study, as well as suggestions for future research, are discussed.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.343-352
• /
• 2021

A convergence study was conducted to develop a smartphone application for self-practice of core nursing skills and evaluate its usefulness for undergraduate nursing students. Mobile Application Rating Scale and seven essay questionnaire were used to for usability evaluation among 22 undergraduate nursing students. The score of the information domain was the highest with 4.19(SD 0.79). The subjective quality domain showed the lowest score of 3.08(SD 0.87). Participants' performance confidence score was 8.23(SD 1.60), and learning satisfaction score was 7.89(SD 0.87). Participants reported that the convenience and repetitive self-learning were the strengths of the app. In addition, design and technical supplementation, and lecturer-feedback would improve effectiveness of the current educational app. Findings of this convergent study would be helpful to promote the application of mobile apps for effective self-learning of core nursing skills in undergraduate nursing education. Future resesarch is needed to examine effectiveness study of mobile app on the performance of core nursing skills.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.10-18
• /
• 2021

CO₂ storage technology in an aquifer is one of the most effective way to decrease global warming due to a high storage capacity and economics. A demonstration-scale offshore CO₂ storage project was performed in a geological deep aquifer in the Pohang Basin, Korea for a technological development of large-scale CO₂ storage. A challenging issue in the early design stage of the project was to establish the proper injectivity during CO₂ injection. To solve this issue, injection conditions were calculated by calculating injection rate, pressure, temperature, CO₂ phase change, and thermodynamic properties. For this study, we simulated and numerically analyzed CO₂ phase change from gas to supercritical phase and flow behavior in transport piping and injection tubing using OLGA program. Our results provide the injectivity conditions of CO₂ injection system combined with a bottomhole pressure of an aquifer.

• Korean Journal of Optics and Photonics
• /
• v.32 no.2
• /
• pp.49-54
• /
• 2021

In this paper, we design and construct the equipment to manufacture large-diameter optical fiber end caps, which are the core parts of high-power fiber lasers, and we fabricate large-diameter optical fiber end caps using the home-made equipment. This equipment consists of a CO2 laser as a fusion-splice heat source, a precision stage assembly for transferring the position of a large-diameter optical fiber and an end cap, and a vision system used for alignment when the fusion splice is interlocked with the stage assembly. The output of the laser source is interlocked with the stage assembly to control the output, and the equipment is manufactured to align the polarization axis of the large-diameter polarization-maintaining optical fiber with the vision system. Optical fiber end caps were manufactured by laser fusion splicing of a large-diameter polarization-maintaining optical fiber with a clad diameter of 400 ㎛ and an end cap of 10×5×2 ㎣ (W×D×H) using home-made equipment. Signal-light insertion loss, polarization extinction ratio, and beam quality M2 of the fabricated large-diameter optical fiber end caps were measured to be 0.6%, 16.7 dB, and 1.21, respectively.