• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.5
• /
• pp.41-49
• /
• 1998

This paper deals with the self-excited oscillation of a system that is controlled by a dynamic nonlinear fuzzy controller. The self-excited oscillation can be observed in the systems composed of nonlinear elements and its analysis is as important as that of stability in the design of nonlinear systems. by using the frequency transfer function analysis known as the describing function method in nonlinear control theory, the oscillation is theoretically predicted. First, the describing function of a dynamic fuzzy controller is derived and then, based on the derived describing fuction, self-excited oscillation of the system controlled by a dynamic fuzzy controller is predicted. To obtain the describing function of the dynamic fuzzy controller, a simple structure is assumed for the fuzzy controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.168-175
• /
• 2010

The issue of rejecting periodic disturbances arises in various applications dealing with rotating machinery. A new method using DIDF (Dual-Input Describing Function) is presented for the rejection of periodic disturbances with uncertain frequency. This can be added to an existing feedback control system without altering the closed-loop system stability. The objective is to design a nonlinear compensator to secure specified oscillation amplitude and frequency which are the same as disturbances. We suggest two procedures to determine coefficients for DIDF's synthesis. The structure of the proposed DIDF is so simple that we can easily synthesize. A number of computer simulations were carried out to demonstrate the salient feature of the proposed DIDF compared to the conventional ones(that is, adaptive algorithms).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.3
• /
• pp.1-14
• /
• 1971

A relay servo, one of the nonlinear sytsems, is inherently compact compared to a linear system for an equivalent control problem. The power element or actuator is not adjusted proportionally in accordance with an error signals but rather is switched abruptly between several discrete conditions. Usually switched conditions are off, full, forward or full reverse. The relay system is a particularly simple and compact one, but probably more effort has been expended on its analysis and design than on all other systems together. Early studies in the art were made by Goldfarb, austin, Oppelt and Kochenburger on the describing function method, which can be used as an approximate check on the stability of the system. The describing function method is based on the assumption that any periodic wave could be approximated as a fundamental one in wide ranges of practical applications. A relay servo system usually operates on a limit cycle condition as the loop gain increases. The stability analysis compensation or any improvement effort based on the describing function method sometimes may present considerable discrepancies on physically realized practical systems. An approach to exact periodic solutions of a relay servo system is much important for the analysis, design and system improvement. This paper dells with periodic solutions of a relay servo system on the basis of describing function and generalized chopper wave form which is composed of infinite number of harmonic series. Various ways of graphical representation were attempted to get periodic solutions, some of which have shown its validity in rapid approach to exact solutions and also in judgement of system behavior.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1741-1747
• /
• 2011

Though various techniques have been studied as a way of adjusting parameters of PID controllers, no perfect method of determining parameters is available to date. This paper proposes a new method for enhancing performance of PID controllers by using the characteristics of dual-input describing function (DIDF). In other words, if nonlinear elements with two inputs (DIDF) are connected in series to the plant, the critical point (-1+j0) for Nyquist stability theory can be moved to a position arbitrarily selected on the complex plane by determining necessary coefficients of the DIDF appropriately. This makes the application of the existing conventional PID parameter tuning methods a lot easier, and stability and robustness of the system are improved simultaneously due to the DIDF inserted.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.227-235
• /
• 1999

In this paper a vibration control fo a one-link flexible beam is considered. At first a state-space model for a flexible beam is derived by using the assumed-modes approach. Based on this model the transfer function between the applied torque and the tip deflection fo the beam is presented because it is convenient to apply our method. In general there exist some control difference due to flexibility of the beam so we adop a forward-passive controller to reduce these phenomena. And a complex dual-input describing function compensator is used to control the tip deflection. The stabiltiy and the performance of the closed-loop system are analyzed. Finally the validity of the derived model and the effectiveness of proposed controller are confirmed throuth simula-tions and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.574-578
• /
• 2004

In this paper, a nonlinear feedback system is analyzed for a surface micromachined resonant accelerometer. For this, a brief illustration of the plant dynamics is given. In the analysis, the periodic signal in the nonlinear feedback loop is obtained by the limit cycle point, which is best approximated via the describing function method. Considering the characteristic feature of plant dynamics, a simple phase shifted relay with finite slope is designed for the nonlinearity implementation. With a describing function for random plus sinusoidal input, we analyzed the effect of a white Gaussian noise on oscillation frequency. Finally, simulation and experimental result is given.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.706-713
• /
• 1985

It is clear that when the amplitude of grinding chatter increases enough the contact between grinding wheel and workpiece cannot be sustained and the loss of contact occurs during a period of grinding chatter. In this paper the behavior of nonlinear grinding chatter due to the loss of contact has been studied. A nonlinear grinding chatter loop is developed where the loss of contact is considered as a nonlinear element of asymmetrical gain. The analysis is carried out in the time domain by numerical simulation and also in the complex domain by use of describing function method. The results show that two typical patterns of nonlinear grinding chatter can originate from the nonlinearity. One is an irregular chatter frequency at starting stage decreases to the natural frequency of grinding structure while the chatter amplitude increases and decreases repeatedly. The other is a limit cycle chatter of which the amplitude and frequency converge to constant and remain. This nonlinear behavior of grinding chatter has been well analyzed by the describing function method and confirmed by the numerical simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.509-518
• /
• 2014

Though various techniques have been studied as a way of adjusting parameters of PID controllers, no perfect method of determining parameters is available to date. Especially the deign of PID controller for unstable processes with dead time(UPWDT) is even more difficult due to various reasons. Generally the existing design procedures for UPWDT involve deriving formulas to meet gain and phase margin specifications, or using inner loop to stabilize UPWDT before applying PID controller. In this paper, the dual-input describing function(DIDF) method is proposed, by which the performance and robustness of the closed-loop system can be improved. The method is based on moving the critical point (-1+j0) of Nyquist stability to a new position arbitrarily selected on the complex plane. This can be done by determining appropriate coefficients of the DIDF. As a result, we can easily determine parameters of PID-type controller by using existing conventional tuning methods for stable or unstable systems. Simulation results are included to show the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.67.5-67
• /
• 2001

A closed loop system with a linear plant and nonlinearity in the feedback connection is analyzed for its quasi-static orbital stability by a state-space approach. First a periodic orbit is assumed to exist in the loop which is determined by describing function method for the given nonlinearity. This is possible by selecting a proper nonlinearity and a rigorous justification of the describing function method.[1-3, 18, 20]. Then by introducing residual operator, a linear perturbed model can be formulated. Using various transformations like a modified eigenstructure decomposition, periodic-averaging, charge of variables and coordinate transformation, the stability of the periodic orbit, as a solution of harmonic balance, can be shown by investigating a simple scalar function and result of linear algebra. This is ...

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.4
• /
• pp.339-345
• /
• 1992

Estimates of maximum amplitudes of conductor galloping are needed in order to determine appropriate phase-to-phase clearances on the overhead lines. One approach to obtaining these estimates is through the use of mathematical models of conductor galloping. Unfortunately, the models that consider both vertical conductor motion (Den Hartog type) and torsional conductor motion are often too complex for practical use. However, the estimates of maximum amplitude obtained from galloping models that assume only vertical (Den Hartog type) conductor motion tend to be too conservative. This paper presents the DF method to obtain the estimates of the amplitude and the frequency of galloping limit cycle, along with the wind pressure at which they occur, from a nonlinear dynamic model that considers both Den Hartog type and torsional conductor motion. From these results, the useful data for the line design guide and further insight into the mechanism of the conductor galloping are obtained.