• Journal of Biosystems Engineering
• /
• v.7 no.1
• /
• pp.42-52
• /
• 1982

This study was intended to develop a cost function for the natural air in-bin drying: system which could lead to an optimization of the drying system cost. Based on the cost function developed, a series of simulated drying tests were conducted with 10-year weather data (1970~1979) for 7 different regions by applying an appropriate levels of system factors. System performance factors treated in this study were initial moisture content, airflow rate, bin diameter and grain depth. An optimization procedure to find the least cost system was developed as follows: First, the worst year of the past decade was determined in consideration of the dryiang time and maximum dry matter loss. Second, the minimum airflow rate for a fixed bin diameter and grain depth was determined. Third, the optimum grain depth was found for the minimum airflow rate with different initial moisture contents and bin diameters. The results obtained in this study are summarized as follows: 1. The optimization procedure developed in this study was able to reduce the time and efforts significantly. 2. Optimum values of drying parameters including airflow rate, grain depth, and fan size were determined for different initial moisture contents and bin diameters in each region. The results are shown in Tables 3 to 9. 3. Optimum grain depths decreased as the initial moisture content and airflow rate increased. 4. Drying time for the least cost system should be reduced with higher initial moisture content and lower drying potential to prevent grain spoilage. 5. The fixed cost was 65 to 75 percent of the total system cost and the variable cost was 25 to 35 percent. To reduce the fixed cost it is desirable to use a drying bin 2 or 3 times a year.

• Interaction and multiscale mechanics
• /
• v.6 no.3
• /
• pp.287-300
• /
• 2013

In this paper, the effect of impulsive line on the propagation of shear waves in non-homogeneous elastic layer is investigated. The rigidity and density in the intermediate layer is assumed to vary quadratic as functions of depth. The dispersion equation is obtained by using the Fourier transform and Green's function technique. The study ends with the mathematical calculations for transmitted wave in the layer. These equations are in complete agreement with the classical results when the non-homogeneity parameters are neglected. Various curves are plotted to show the effects of non-homogeneities on shear waves in the intermediate layer.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.217-220
• /
• 2000

This paper studies a real-time VBR traffic characterization. There are two big approaches to determine traffic. One is a statistic approach and the other is a deterministic approach. This paper proposes a new constraint function, what we called “Sub-Sum Constraint Function”(SSCF). This function is mainly based on a deterministic approach and uses a statistic approach. It predicts and calculates the next rate with a present information about the stream. SSCF captures the intuitive bounded by a rate lower than its peak rate and closer to its long-term average rate. This model makes a order of the constraint function much less than any other works (O(n)). It can also be mapped on a token bucket algorithm which consists of r (token rate) and b (token depth). We use a concept, EB(effective bandwidth) for a utility of our function and comparing with other techniques such as CBR, average VBR. We simulated 21 multimedia sources for verifying the utility of our function.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.62-66
• /
• 2004

A study for investigating the effects of the cutting conditions(feed rate, radial depth of cut, cutting speed) and the tool diameter on the circumferential geometry of the cyl indrically end-mi1led workpiece is described. In this work, the circumferential geometry is characterized by the roundness error. Experimental results show that the circumferential geometry is directly affected by the material removal per tooth,which is defined as a function of the cutting speed, the feed rate and the radial depth of cut. And, the radial depth of cut is revealed to be the most critical condition among them. It is also found that the roundness error decreases when the tool diameter is larger under the same cutting conditions.

• Journal of Mechanical Science and Technology
• /
• v.16 no.4
• /
• pp.454-467
• /
• 2002

It has been established that a crack has an important effect on the dynamic behavior of a structure. This effect depends mainly on the location and depth of the crack. Toidentifythelocation and depth of a crack in a structure, a method is presented in this paper which uses neuro-fuzzy-evolutionary technique, that is, Adaptive-Network-based Fuzzy Inference System (ANFIS) solved via hybrid learning algorithm (the back-propagation gradient descent and the least-squares method) and Continuous Evolutionary Algorithms (CEAs) solving sir ale objective optimization problems with a continuous function and continuous search space efficiently are unified. With this ANFIS and CEAs, it is possible to formulate the inverse problem. ANFIS is used to obtain the input(the location and depth of a crack) - output(the structural Eigenfrequencies) relation of the structural system. CEAs are used to identify the crack location and depth by minimizing the difference from the measured frequencies. We have tried this new idea on beam structures and the results are promising.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.1
• /
• pp.9-16
• /
• 1987

The second-order steady horizontal force and vertical moment are derived for a freely-floating body in water of finite depth. Momentum relations are used in terms of the Kochin function in the fluid region far from the body. The general results look very similar to those for deep water. The water depth is formally reflected in terms of the ratio between the phase and group velocities of incident waves. Computations are made for a Series 60 hull($C_B=0.6$) and are compared with the corresponding results of deep water. It is shown that the vertical drift moment for slender ships becomes completely free from water depth when the wave-ship length ratio is taken as parameter.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.99-103
• /
• 2011

The stereoscopic vision system is the algorithm to obtain the depth of target object of stereo vision image. This paper presents an efficient disparity matching method using blue edge filter and graph cut algorithm. We do recommend the use of the simple sobel edge operator. The application of B band sobel edge operator over image demonstrates result with somewhat noisy (distinct border). The basic technique is to construct a specialized graph for the energy function to be minimized such that the minimum cut on the graph also minimizes the energy (either globally or locally). This method has the advantage of saving a lot of data. We propose a preprocessing effective stereo matching method based on sobel algorithm which uses blue edge information and the graph cut, we could obtain effective depth map.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.67-71
• /
• 2016

This paper addresses a problem of defocus map recovery from single image. We describe a simple effective approach to estimate the spatial value of defocus blur at the edge location of the image. At first, we perform a re-blurring process using Gaussian function with input image, and calculate a gradient magnitude ratio with blurring amount between input image and re-blurred image. Then we get a full defocus map by propagating the blur amount at the edge location. Experimental result reveals that our method outperforms a reliable estimation of depth map, and shows that our algorithm is robust to noise, inaccurate edge location and interferences of neighboring edges within input image.

• Economic and Environmental Geology
• /
• v.31 no.4
• /
• pp.339-347
• /
• 1998

The purpose of this study is to find P-wave crustal velocity structure and the Moho characteristics beneath Seoul (SEO) and Inchon (INCN) stations using broadband teleseismic records. The use of broadband receiver function analysis is increasing to estimate the fine-scale velocity structure of the lithosphere. The broadband receiver functions are developed from teleseismic events of P waveforms recorded at Seoul (SEO) and Inchon (INCN) stations, and are analyzed to examine the crustal structure beneath the stations. The teleseismic receiver functions are inverted in the time domain of the vertical P wave velocity structures beneath the stations. The crustal velocity structures beneath the stations are estimated using the receiver function inversion method (Ammon et al., 1990). The general features of inversion results are as follows: (1) For the Seoul station, the Conrad and Moho discontinuities exist at 22 km and 30 km depth in the south ($BAZ=180^{\circ}$) direction. (2) For the Inchon station, the Conrad discontinuity exists at 22 km depth in the direction of SE ($BAZ=145^{\circ}$) and the Moho discontinuity exists at 30~34 km depth with a 4 km thick, which consists of a laminated velocity transition layers with thickness, whereas a crust-mantle boundary beneath the Seoul station consists of a more sharp boundary compared with the Moho shape of INCN station.

• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.55-64
• /
• 2017

The paper concerns concrete carbonation, the phenomena that occurs in every type of climate, especially in urban-industrial areas. In European Standards, including Eurocode (EC) for concrete structures the demanded durability of construction located in the conditions of the carbonation threat is mainly assured by the selection of suitable thickness of reinforcement cover. According to EC0 and EC2, the thickness of the cover in the particular class of exposure depends on the structural class/category and concrete compressive strength class which is determined by cement content and water-cement ratio (thus the quantitative composition) but it is not differentiated for various cements, nor additives (i.e., qualitative composition), nor technological types of concrete. As a consequence the selected thickness of concrete cover is in fact a far estimation - sometimes too exaggerated (too safe or too risky). The paper presents the elaborated "self-terminated carbonation model" that includes abovementioned factors and enables to indicate the maximal possible depth of carbonation. This is possible because presented model is a hyperbolic function of carbonation depth in time (the other models published in the literature use the parabolic function that theoretically assume the infinite increase of carbonation depth value). The paper discusses the presented model in comparison to other models published in the literature, moreover it contains the algorithm of concrete cover design with use of the model as well as an example of calculation of the cover thickness.