• Journal of Magnetics
• /
• 제13권3호
• /
• pp.97-101
• /
• 2008

We investigated the exchange bias fields at the NiFe/FeMn and FeMn/CoFe interfaces in 18.9-nm NiFe/15.0-nm FeMn/17.6-nm CoFe trilayer thin films as the annealing temperature was varied from room temperature to $250^{\circ}C$ in a vacuum for 1 hour in a magnetic field of 150 Oe. Interestingly, magnetic hysteresis (M-H) measurements showed that NiFe/FeMn/CoFe trilayer thin films exhibited a completely contrasting variation of the exchange bias fields at both the NiFe/FeMn and FeMn/CoFe interfaces with annealing temperatures. High-angle X-ray diffraction (XRD) measurements indicated the absence of any discernible effect of thermal treatment on the NiFe(111) and FeMn(111) peaks. The compositional depth profile obtained from X-ray photoelectron spectroscopy (XPS) results presented the asymmetric compositional depth profiles of the Mn and Fe atoms throughout the FeMn layer. We contend that this asymmetric compositional depth profile and the preferential Mn diffusion into the NiFe layer, compared to that into the CoFe layer, are conclusive experimental evidence of the contrasting variation of the exchange bias fields at two interfaces having a common polycrystalline FeMn(111) layer.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.218-222
• /
• 1996

STrained layers and strain depth profile of high dose As ion implanted (100) si wafer annealed at various temperatures have been investigated by means of X-ray double crystal diffractometry (X-ray DCD). The results obtained by x-ray rocking curve analysis showed a defect layer at the original amorphous /crystalline interface of 1400$\AA$ depth. In addition arsenic ion concentrtion profiles and defect distributions in depth were obtained by the SIMS and TRIM -code simulation . the positive strain depth profile determined from the rocking curve analysis were only presented under 0.14 $\mu$m from the surface for samples ananelaed at $600^{\circ}C$. The results was shown that the thickness of amprphous layer is 0.14 $\mu$m indirectry, and it was good agreement with the TRIM -Code simulation. Additionally, it could be thought that the positive strain have been affected residual intersitial atoms under the amorphous/crystalline interface formed by ion implantation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.425-432
• /
• 2004

In this paper, the results of the numerical analysis for the minimum depth of soil cover have been compared with those of currently suggested codes. Based on this comparison, the minimum depth of soil cover for the structures with long spans was suggested. Results showed that the actual depth of the soil cover required against soil failure over a circular and low-profile arch structure does not vary significantly with the size of the span and for the circular structure, the minimum depth of the soil cover was about 1.5m, and for the low-profile arch structures, below about 1.6m. And the previously established code in which the minimum depth of soil cover is defined to linearly increase with the increase in the span (CHBDC, 2001) was very conservative. For the structure with the relieving slab, the maximum live load thrust was reduced by about 36 percent and the maximum moment about 81 percent. The numerical analysis gave more conservative estimation of the live-load thrusts than the other design methods.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.45-55
• /
• 2012

PURPOSES : Skid resistance and noise of roads highly depend on the characteristics of pavement texture. Therefore, estimation of texture characteristics may give useful information for the skid resistance and noise of road. Generally, Sand Patch Test is performed in order to estimate MTD(Mean Texture Depth). However, it is time-consuming and needs traffic control. This study aimed to investigate the effectiveness of measurement texture depth using the Portable Laser Profiler that give the MPD(Mean Profile Depth). METHODS : MTD and MPD were collected on the number of expressway sections including Central Inland Test Road sections in Korea. Statistical analysis are performed to establish the relationship between MTD data based on Sand Patch Test and MPD data obtained by the Portable Laser Profiler. RESULTS : Linear relationship MPD and MTD is observed for both of asphalt pavement and concrete pavement such as R-square of 0.51 to 0.58. CONCLUSIONS : Even though, the test method and definition of MPD and MTD are different. EMTD(Estimated Mean Texture Depth) can be obtained by using the correlationship between MPD with MTD.

• 한국지형학회지
• /
• 제18권1호
• /
• pp.57-71
• /
• 2011

남해안의 고성에 위치하는 월치고개 단면은 10m 두께의 화강암 풍화층으로써, 10YR 4/4에 가까운 적색을 띠고 있어서 고온다습했던 고기후의 산물로 판단되기 쉬운 단면이다. 그러나 단면관찰과 박편분석, XRD 동정과 지화학적 분석을 통해 살펴본 결과, 열수변성의 대표광물인 할로이사이트가 단면 전체에서 보편적으로 나타나고 있으며, 한반도의 일반적 화강암 풍화층의 화학적 풍화율인 60~70%보다 훨씬 높은 97%에 달하였다. 이는 기후지형학적 풍화에 의해 형성된 적색풍화층이 아니라, 지열수에 의한 열수변성 가능성이 매우 높게 단면으로 판단된다.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1631-1638
• /
• 2013

포장파손과 IRI 등의 요소들은 포장상태를 평가하는 중요한 요소이다. 최근 들어 주행쾌적성에 영향을 주는 타이어-노면소음을 포장관리 시스템에 포함시키는 필요성이 대두되고 있다. PLP(Portable Laser Profiler)를 이용하여 주행 중 노면조직특성인 평균프로파일깊이(MPD)를 측정할 수 있는 기법이 개발되었다. 일반적으로 타이어-노면소음은 노면조직특성에 따라 다르게 발생하며, 타이어-노면소음을 예측하는 유용한 정보로 사용할 수 있다. 본 연구에서는 아스팔트 구간의 노면조직특성에 따른 타이어-노면소음을 평가하기 위해 다수의 아스팔트 구간에서 MPD와 타이어-노면소음을 동시에 측정하여 데이터를 획득하였으며, 통계학적 분석을 통해 타이어-노면소음 추정식을 제안하였다.

• 한국해양학회지
• /
• 제29권3호
• /
• pp.287-295
• /
• 1994

1993년 4월 동해 남서해역에 발생한 난수성 소용돌이의 수온구조와 ADCP (Acoustical Doppler Current Profiler)의 음향자료를 이용하여 계산된 후방산란 강도 구조의 상관관계를 연구하였다. 후방산란 강도 계산 결과, 난수성 소용돌이 중심부와 1$0^{\circ}C$의 등온선 부근에서 산란체의 의한 산랑강도가 크게 나타나고 있다. 수온 구조와 의 비교시 남북단면의 경우 산란강도 구조는 수온 구조와 일치하는 모양을 보이고 있 으나, 동서단면의 경우 산란강도가 연안쪽에서 크게 나타나는 비대칭 구조를 보이고 있어 수온구조와 일치하지 않고 있다. 이같은 비대칭 현상은 동한난류의 유입축인 연 안쪽에서 해류와 산란체로 작용하는 부유생물(주로 동물성 플랑크톤)이 함께 이동하여 산란체의 양적 분포가 크기 때문이라 설명할 수 있다. 또한 같은 해 8월 관측된 CREAMS '93(Circulation Research of the East Asian Marginal Sea)의 ADCP 자료 분석 결과는 산란강도와 수온구조가 유사하게 나타나고 있다.

• 치과방사선
• /
• 제1권1호
• /
• pp.29-37
• /
• 1971

Modern orthodontics implies not only occlusal excellence, but also the positioning of teeth to produce optimal facial harmony for the individual patients. Several methods have been used in the study of facial height, width and depth were made from living subjects. These methods, however, complicate to control the subjects, therefore many investigators have used profile cephalometric technics. Practically, cephalometric technics were used m orthodontic treatment, maxillo-facial surgery and anthropometric studies. Author was studied to investigate the normal standards of soft tissue profile in Korean adolescences. The subjects consisted of 53 males and 54 females from 17 to 22 years of age and with normal occlusion and acceptable profile. Aluminum filter was designed to obtain both hard and soft tissue structures on a single film. Eight profile landmarks were plotted and drawn on the tracings of all cephalograms and eighteen depth, height and angles were measured from each landmarks of the cephalograms. The following conclusIOns were obtained from this studies; 1. Total facial convexity was 170. 75 in males and females samples and lower facial and: labiomandibular convexity were each of 141.44, 171.05. 2. Maxillary and mandibular sulcus angulations were 137.61, 129.52 and upper and lower lip inclinations were each of 123.26 and 49.56 in male and females. 3. Soft tissue depth of several points were as follows; Subnasale 18.74㎜ in males and 16.65㎜ in females Pogonion 13.40㎜ in males and 13.07㎜ in females upper lip 14.06㎜ in males and 11.91㎜ in females . lower lip 15.46㎜, 13.63㎜ in males and females 4. The protrusion of nose were 16.28㎜ in males and 15.56㎜ in females 5. The vertical length of upper and lower lips were 25.67㎜, 52.96㎜ and the lip posture was indicated 93.43 per cent (closed state) in centric occlusions.

• Steel and Composite Structures
• /
• 제7권1호
• /
• pp.71-85
• /
• 2007

This study suggests modular composite profile beams, where the prefab concept is applied to existing composite profile beams. The prefab concept produces a beam of desired size having two types of profile: side module and bottom module. Module section will improve construction efforts because it offers several benefits : reduction of deflections due to creep and shrinkage, which might be found in existing composite profile beams; increase in span/depth ratio; and free prefabrication of any required beams. Based on the established analysis theory of composite profile beams, an analysis theory of modular composite profile beams was suggested, and analysis values were compared with experimental ones. The behavior of individual modules with increase of load was measured with a strain gauge, and the shear connection ratio between modules was analyzed by using the measured values. As a result of experiment, it was found that theoretical flexural strength on condition of full connection was 57%-80% by connection of modules for each specimen, and it is expected that flexural strength will approximate the theoretical levels through further module improvement.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.603-603
• /
• 2012

최근에 전면 emitter의 doping profile이 다른 selective emitter solar cell은 실제 제작시단파장 영역에서 많은 gain을 얻을 수 없어 LBC 구조의 태양전지에 관한 연구가 많이 진행되고 있다. 본 연구는 TCAD simulation을 이용하여 후면에 형성되는 locally doped BSF(p++) region의 doping profile의 변화에 따른 태양전지 특성에 관한 연구이다. Al으로 형성되는 local back contact의 doping depth 및 surface concentration에 따른 전기적, 광학적 분석을 통해 주도적인 인자를 분석하고 최적화하였다. 특히 doping depth에 따른 변화보다는 surface concentration의 변화에 따른 특성변화가 주도적으로 나타났다.