• Journal of dental hygiene science
• /
• v.16 no.5
• /
• pp.349-354
• /
• 2016

The purpose of this study was to evaluate the efficacy of the newly-developed $Qraypen^{TM}$ (All In One Bio, Korea) system for the diagnosis of early proximal caries by comparing it with the conventional methods of visual inspection and periapical radiography. This study was carried out from July 2015 to April 2016 targeting 32 children aged 7~12 years who visited Y-Dental Clinic for school oral health examinations. Two investigators selected and examined a total of 153 primary molars that had not undergone restorative treatment. Comparisons were carried out between visual inspections, readings of posterior periapical radiography images, and readings of $Qraypen^{TM}$ images. This study revealed that the percentage of interproximal surfaces of primary molar teeth without caries incidence was 83.7% using $Qraypen^{TM}$ imaging and 84.9% using visual inspection and periapical radiography. The differences between the two methods were not statistically significant. Thus, $Qraypen^{TM}$ is expected to be a useful and convenient auxiliary diagnostic device that can facilitate the detection of hidden proximal caries in primary molars.

• Journal of Veterinary Clinics
• /
• v.22 no.3
• /
• pp.190-193
• /
• 2005

The concentration of tartrate resistant acid phosphatase (TRAP) in synovial fluid of normal stifle joint was investigated in order to establish a baseline data to distinguish between healthy joint and joint with injury of cranial cruciate ligament (CCL). Twenty three mixed-breed healthy dogs free from joint diseases (fourteen adult and nine young) were used in this study. The dogs were sedated and synovial fluid was collected from the femoropatellar compartment of stifle joints by direct arthrocentesis. The concentration of TRAP in synovial fluid was determined using the method of Lang. The concentration of TRAP were $0.083{\pm}0.039$ IU/ml in adult dogs, $0.064{\pm}0.023$ IU/ml in young dogs, $0.075{\pm}0.028$ IU/ml in large dogs (>22 kg), $0.076{\pm}0.046$ IU/ml in small dogs (<22 kg), $0.085{\pm}0.036$ IU/ml in neutered dogs and $0.056{\pm}0.022$ IU/ml in intact dogs. The concentration of TRAP in the neutered dogs was significantly (p<0.05) higher than the intact dogs. This data can be used baseline data for a comparison with joint with injury of cranial cruciate ligament.

• Journal of Technologic Dentistry
• /
• v.18 no.1
• /
• pp.73-94
• /
• 1996

This study was aimed for evaluating the validity of relative-productivity index on the basis of working hour(RPHW index) designed by author as new productivity index and drawing up a plan of bettering productivity to cope with financial difficulty of dental laboratories. Fortyeight dental laboratories extracted by cluster-sampling method form all the dental laboratories in Seoul were subjected for this study. And in each of them, the term of establishment which was divied into three group as short-term, mid-term and long-term group, the scale of dental laboratory which as divided into two group by number of dental technician as small-scale group and large-scale group, the salary system which was composed of salary criteria, pay according to ablility criteria and collectiveagree, the salary level, simple labor productivity index(SLP index), relative-productivity index on the basis of worker number(ROWN) and relative-productivity index on the basis of working hour(RPWH index) were surveyed through the self-administractive questionaires. The results as follows : Most of dental laboratories(93.6%) were managed by non-professional managers. The establishment rate per year of dental laboratory was the increase. The mean number of employees of dental laboratories was $7.00{\pm}3.90$ person. The ratio of smallscale group(under the 5 employees) was 42.6% and as the term of establishment was shorter, the ratio of small-scale group was higher. The mean establishment area of dental laboratories was $24.49{\pm}10.97$ unit and the mean establishment area per head of dental laboratories was $4.05{\pm}3.90$ unit. The estabilshment area and area per head were not significantly associted with the term of establishment, but as the term of establishment was shorter, the estabkishment area per head was slightly wider. The establishment area per head in small-scale group was significantly wider than large-scale group(over the 6 emplayees) The salary criteria(54.4%), pay according to ability(79.2)m ability criteria(77.1%) and collectiveagree(79.2%) as salary systems were used in the most of all dnetal laboratoies. The all salary systems were not significantly associated with the term of establishment and the scale of dental laboratories. The monthly mean salary level of dental laboratoies was $125.64{\pm}31.06$ milion won. The monthly salary level was not significantly associated with the term of establishment and the scale of dental laboratores. But the monthly salary level in the short-term group and the small-scale group were slightly lower than others. The SLP index, the RPWN index and the RPWH index of dental laboratories were $132.16{\pm}48.41$, $382.41{\pm}128.76$ and $76.06{\pm}25.11$, respectively. The SLP, the RPWN and the RPWH of dental laboratories were not significantly associated with the term SLP, the RPWN and the RPWH of dental laboratories were significantly associated with the area of dental laboratory and the salary level. Except for only the association salary criteria among salary system with RPWH of dental laboratories, all other salary system were not associated with the SLP, the RPWN and the RPWH of dental laboratories.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.37-45
• /
• 2011

Purpose: Heat pressed ceramics, used for all ceramic restorations, have the additional advantage of being technically less change through using of the lost-wax technique. Conceptually, combining the ceramic with the clinically proven reinforcing ability of a metal framework would be advantageous; however, cause of mismatching of fusion between ceramics and metal frameworks which from differences of casting temperature and coefficient of thermal expansion, pressed ceramics could not be used with a metal framework. The purpose of this study was to compare shear bond strength of press-to metal ceramic to porcelain fused non precious metal and feldspatic porcelain fused non precious metal. Methods: The 30 metal specimens were casted in a porcelain fused non precious metal nickel-chromium alloy. They were divided into 3 groups by surface treatment and applied ceramic: $125{\mu}m$ aluminium oxide sandblasting and veneered feldspatic porcelain (group FP), $125{\mu}m$ aluminium oxide sandblasting and had press-to-metal ceramic applied (group PC), porcelain bonder (gold bonder) fused on surface of metal specimens and had press-to-metal ceramic applied (group PCG). In each group 10 metal specimens were used. The press-to-metal ceramic applied 20 specimens had ash-free wax pattern applied, the metal-wax complexes invested, and were pressed with heat press ceramic. All specimens were subjected to shear bond strength test at a crosshead speed of 1.0 mm/min. Results: The results of measured in Mean SD and data were analyzed by one-way AVOVA (p= .05) and Tukey HSD test (p= .05).: group FP $16.090{\pm}1.841$ MPa, group PC $12.620{\pm}1.8256$ MPa, group PCG $10.920{\pm}0.9283$, significant differences between all groups (p < .05). Significant differences were found in each between group FP and group PC, group FP and group PCG (p < .05). Conclusion: The shear bond strength of press-to-metal ceramic to porcelain fused non precious metal was described higher in unused gold bonder group than used gold bonder groups.

• International Journal of Oral Biology
• /
• v.34 no.1
• /
• pp.1-6
• /
• 2009

The purpose of the present study was to examine the role of peripheral nitric oxide (NO) pathways in the onset of interleukin (IL)-1$\beta$-induced mechanical allodynia in the orofacial area. Experiments were carried out on male Sprague-Dawley rats weighing 230-280 gm and surgical procedures were performed under pentobarbital sodium (40 mg/kg, i.p.). Under anesthesia, a polyethylene tube (PE10) was implanted into the subcutaneous area of one vibrissa pad, which enabled the injection of IL-1$\beta$ or other chemicals. We subcutaneously injected 50 ${\mu}L$ of IL-1$\beta$ into a vibrissa pad through the implanted polyethylene tube with a 100 ${\mu}L$ Hamilton syringe. After the administration of 0.01, 0.1, 1, or 10 pg of IL-1$\beta$, withdrawal behavioral responses were examined. The subcutaneous injection of saline had no effects on the air-puff thresholds. Following the subcutaneous injection of 0.01, 0.1, 1, or 10 pg of IL-1$\beta$, the threshold of air puffs decreased significantly to 12 $\pm$ 3, 7 $\pm$ 2, 5 $\pm$ 1, or 5 $\pm$ 1 psi, respectively, in a dose dependent manner. Pretreatment with L-NAME, a nitric oxide synthase (NOS) inhibitor, blocked IL-1$\beta$-induced mechanical allodynia. However, neither D-NAME, an inactive isomer of L-NAME, nor vehicle affected the IL-1$\beta$-induced mechanical allodynia. Subcutaneous injection of IL-1$\beta$ increased the number of c-fos-like immunoreactive neurons, whereas pretreatment with L-NAME decreased this number, in the trigeminal caudal nucleus. These results suggest that pro-inflammatory cytokines and NO are important contributors to the pathogenesis of persistent and exaggerated IL-1$\beta$-induced pain states. Based on these observations, peripheral application of NOS inhibitors may be of therapeutic value in treating pain disorders in the clinic.

• Journal of Preventive Medicine and Public Health
• /
• v.49 no.3
• /
• pp.165-175
• /
• 2016

Objectives: The present study was undertaken to study the maternal risk factors for preterm birth (PTB) and low birth weight (LBW) with a special emphasis on assessing the proportions of maternal genitourinary and periodontal infections among Indian women and their association with adverse pregnancy outcomes. Methods: A hospital-based prospective study comprising 790 pregnant women visiting the obstetrics clinic for a routine antenatal check-up was undertaken. Once recruited, all study participants underwent clinical and microbiological investigations for genitourinary infections followed by a dental check-up for the presence of periodontitis. The study participants were followed up until their delivery to record the pregnancy outcomes. Infectious and non-infectious risk factors for PTB and LBW were assessed using univariate and multivariate Cox regression analysis. Independent risk factors for PTB and LBW were reported in terms of adjusted relative risk (ARR) with the 95% confidence interval (CI). Results: Rates of PTB and LBW in the study population were 7.6% and 11.4%, respectively. Previous preterm delivery (ARR, 5.37; 95% CI, 1.5 to 19.1), periodontitis (ARR, 2.39; 95% CI, 1.1 to 4.9), Oligohydramnios (ARR, 5.23; 95% CI, 2.4 to 11.5), presence of Nugent's intermediate vaginal flora (ARR, 2.75; 95% CI, 1.4 to 5.1), gestational diabetes mellitus (ARR, 2.91; 95% CI, 1.0 to 8.3), and maternal height <1.50 m (ARR, 2.21; 95% CI, 1.1 to 4.1) were risk factors for PTB, while periodontitis (ARR, 3.38; 95% CI, 1.6 to 6.9), gestational hypertension (ARR, 3.70; 95% CI, 1.3 to 10.8), maternal height <1.50 m (ARR, 2.66; 95% CI, 1.3 to 5.1) and genital infection during later stages of pregnancy (ARR, 2.79; 95% CI, 1.2 to 6.1) were independent risk factors for LBW. Conclusions: Our study findings underscore the need to consider screening for potential genitourinary and periodontal infections during routine antenatal care in developing countries.

• Journal of the Korean Society of School Health
• /
• v.13 no.1
• /
• pp.131-145
• /
• 2000

For the purpose of strengthening Dental Hygiene students' confidence and motivation in the Dental Hygiene Department and helping construct proper professionalism, survey on Dental Hygiene students' consciousness of attitude to and satisfaction of the course, career plan and occupation mind set was carried out. 530 three year students in 8 Dental Hygiene academies in Seoul and Kyonggi province were questioned. The results of the survery are as follows:. 1. Dental Hygiene students' motives consisted primarily of employment and a desire for professionalism 25% of them entered the course after one failure in the entrance examination and 17% had family members engaging in the dentistry field 84%, the largest portion, were from an academic high school. 24% had some knowledge of Dental Hygiene, which they had acquired from seniors, friends, and teachers. 2. Patient care and treatment assistance related matters were not considered important in the course. The weak points of the course turned out to be education in computers and foreign languages, but the weakest was the ability of patient care during clinical training. 53% had experiences had thought of changing their major while in the course because it didn't match their aptitude and interest. 3. As for a career after graduation, 49% worried about it Most students wanted to work at a dental hospital or general hospital, The most favored duty was coordination or reception or oral disease preventive work. They wanted to work untill they had a stable living. 68% answered they would get a job at an oral clinic and 70% said they would continue studying for self-realization. 4. Satisfaction with the major was high in students whose aptitude and interest matched the course, who had background knowledge of the major, and who. didn't think of changing the major but would continue studying resulting in statistically slight difference(p<0.001). As to satisfaction with the faculties, it was high in the students whose aptitude and interest matched the major and who didn't think about a career after graduation showing a slight difference(p<05, p<0l). As for satisfaction with clinical training, students whose aptitude and interest matched the major and who didn't consider changing the major answered positively showing a statistically slight difference(p<.001, p<.01). As to satisfaction with the course, it was high in the students who entered with aptitude and interest, who had preliminary knowledge, who didn't consider changing the major, and who didn't think about a career after graduation showing a statistically slight difference(p<.001, p<.05). 5. Occupation mind-set was positive for students who entered with interest and aptitude, who had preliminary knowledge, and who had not considered changing the major showing a statistically slight difference(P<.001). The higher the satisfaction with the major, faculty and clinical training was, the more positive the occupation mind-set was(p<.001).

• Journal of Korean Academy of Dental Administration
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2020

Dental settings have unique characteristics that warrant specific infection control considerations, including (1) prioritizing the most critical dental services and provide care in a way that minimizes harm to patients due to delayed care, or harm to personnel from potential exposure to persons infected with the COVID-19 disease, and (2) proactively communicate to both personnel and patients the need for them to stay at home if sick. For health care, an interim infection prevention and control recommendation (COVID-19) is recommended for patients suspected of having coronavirus or those whose status has been confirmed. SARS-CoV-2, which is the virus that causes COVID-19, is thought to be spread primarily between people who are in close contact with one another (within 6 feet) through respiratory droplets that are produced when an infected person coughs, sneezes, or talks. Airborne transmission from person-to-person over long distances is unlikely. However, COVID-19 is a new disease, and there remain uncertainties about its mode of spreads and the severity of illness it causes. The virus has been shown to persist in aerosols for several hours, and on some surfaces for days under laboratory conditions. COVID-19 may also be spread by people who are asymptomatic. The practice of dentistry involves the use of rotary dental and surgical instruments, such as handpieces or ultrasonic scalers, and air-water syringes. These instruments create a visible spray that can contain particle droplets of water, saliva, blood, microorganisms, and other debris. While KF 94 masks protect the mucous membranes of the mouth and nose from droplet spatter, they do not provide complete protection against the inhalation of airborne infectious agents. If the patient is afebrile (temperature <100.4°F)* and otherwise without symptoms consistent with COVID-19, then dental care may be provided using appropriate engineering and administrative controls, work practices, and infection control considerations. It is necessary to provide supplies for respiratory hygiene and cough etiquette, including alcohol-based hand rub (ABHR) with 60%~95% alcohol, tissues, and no-touch receptacles for disposal, at healthcare facility entrances, waiting rooms, and patient check-ins. There is also the need to install physical barriers (e.g., glass or plastic windows) in reception areas to limit close contact between triage personnel and potentially infectious patients. Ideally, dental treatment should be provided in individual rooms whenever possible, with a spacing of at least 6 feet between the patient chairs. Further, the use of easy-to-clean floor-to-ceiling barriers will enhance the effectiveness of portable HEPA air filtration systems. Before and after all patient contact, contact with potentially infectious material, and before putting on and after removing personal protective equipment, including gloves, hand hygiene after removal is particularly important to remove any pathogens that may have been transferred to the bare hands during the removal process. ABHR with 60~95% alcohol is to be used, or hands should be washed with soap and water for at least 20 s.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.242-253
• /
• 2020

Purpose: The aim of this study was to compare the accuracy of dies fabricated using 3D printing system to conventional method and to evaluate overall volumetric changes by arranging the superimposed surfaces. Materials and Methods: A mandibular right first molar from a dental model was prepared, scanned and fabricated with composites of polyetherketoneketone (PEKK). Master dies were classified into 4 groups. For the conventional method, the impression was taken with polyvinylsiloxane and the impression was poured with Type IV dental stone. For the 3D printing, the standard die was scanned and converted into models using three different 3D printers. Each of four methods was used to make 10 specimens. Scanned files were superimposed with the standard die by using 3D surface matching software. For statistical analysis, Kruskal-Wallis test and Mann-Whitney U test were done (P < 0.05). Results: Compared to the standard model, the volumetric changes of dies fabricated by each method were significantly different except the models fabricated by conventional method and 3D printer of Stereolithography (P < 0.05). The conventional dies showed the lowest volumetric change than 3D printed dies (P < 0.05). 3D printed dies fabricated by Stereolithography showed the lowest volumetric change among the different 3D printers (P < 0.05). Conclusion: The conventional dies were more accurate than 3D printed dies, though 3D printed dies were within clinically acceptable range. Thus, 3D printed dies can be used for fabricating restorations.

• Journal of dental hygiene science
• /
• v.9 no.3
• /
• pp.295-302
• /
• 2009

The purpose of this study is to provide fundamental data for managing occupational stress and promoting health by investigating the factors of dental hygienists' occupational stress and the relationship among occupational stress, health status and somatization. The subjects in this study are 28 dental hygienists who have worked at dental clinic in the metropolitan area. The findings of this study are as follows: 1. The average age of the subjects is 25.1 and the average working career is 42.8 months. 8-9 hours is the most frequent average working time as 55.5% and a 6-day workweek appears most frequently with 33.8%. 2. The total average of occupational stress is 45.24 points and out of the seven sub-factors, job demand is the highest as 56.17 points. 3. A group of working at dental university hospitals scores significantly high and a group of working over 10 hours per day scores significantly low in health status (p<0.05). 4. A group of a 5-day workweek. night and holiday duty scores 18.64 which is significantly high in somatization(p<0.05). 5. Occupational stress have slightly negative correlation (-.341, p<0.01) with health status and slightly positive correlation (.330, p<0.01) with somatization. There is a strong, negative correlation between health status and somatization(-.762, p<0.01 ). 6. Health status and somatization have a slightly positive correlation with every other sub-factor of occupational stress except job self-control.