• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.284-291
• /
• 2011

Numerical experiments on biological interfacial layer, DEJ by finite element software ABAQUS have been conducted to study its fracture behavior including crack bridging / arresting characteristics in the model. Crack growth simulation has been carried out by numerical tool, XFEM, devoted to study cracks and discontinuities. The fracture toughness of DEJ has been estimated before and after crack bridging. The implications of bridging in numerical study of fracture behavior of DEJ-like biological interface have been discussed. It has been observed that the results provided by the numerical studies without proper accommodation of bridging phenomenon can mislead. This study can be helpful for understanding the DEJ-like biological interface in terms of its fracture toughness, an important material characteristics. This property of the material is an important measure that has to be taken care during design and manufacturing processes.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.207-211
• /
• 2007

Many studies reported that the presence of cervical enamel projection (CEP) in cemento-enamel junction(CEJ) is greatly related to periodontal disease. The aim of this study was to investigate the prevalence of enamel projections in buccal, mesial, distal and lingual(palatal) surface of maxillary and mandibular first and second molars on extracted teeth. Among 660 teeth extracted due to the periodontal disease and dental caries in Seoul National University Dental Hospital was examined, 530 teeth which has distinct CEJ were examined with 8 times x electronic magnifier by one examiner. The prevalence of CEP for maxillary teeth (45.49%) was higher than that of mandible (39.62%). The first molar (45.22%) had more CEP than second (39.89%). Furthermore, buccal surface had highest incidence of CEP than other surfaces. The results of this study imply that the clinicians should take good care of the prevalence of CEP when scaling or root planning, plaque control instruction and periodontal surgery.

• The Journal of the Korean dental association
• /
• v.56 no.1
• /
• pp.8-16
• /
• 2018

Purpose: The aim of in vitro study was to compare the diagnostic accuracy to detect non-cavitated enamel caries on smooth surface by using four kinds of the QLF devices. Materials and Methods: A total of 52 human permanent premolars and molars were used. Fluorescence images were captured by the QLF devices (Inspektor Pro, QLF-D, Qraycam, and Qraypen). Fluorescence loss of the QLF was calculated. The severity of lesions was categorized into the following 3 scores using polarized light microscopy: normal (S), enamel demineralization to outer half of enamel (D1), and inner half of the enamel up to the dentin-enamel junction (D2). The Kruskal-Wallis test was used to compare the fluorescence loss among the QLF devices. Spearman rank correlation coefficient between histological scores and fluorescence loss of the devices was calculated. The sensitivity, specificity, and area under the receiver operating curve (AUROC) were calculated to compare their diagnostic accuracies. Results: The correlation coefficients between histological scores and the fluorescence loss of the devices showed 0.77 to 0.81 (P < 0.001). All histological scores, the fluorescence loss among the devices showed no statistical difference. Among the devices, sensitivity, specificity, and AUC values of the fluorescence loss showed 0.84 to 0.94, 0.76 to 0.90, and 0.90 to 0.92, respectively. Conclusions: All QLF devices had no difference with excellent diagnostic accuracies to detect non-cavitated enamel caries on smooth surface.

• Journal of Korean Dental Science
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2011

Purpose: Exact knowledge of the location and dimension of the pulp chamber help to maintain the pulp healthy during operative procedure and also reduces the risk of perforation of pulp chamber during root canal treatment. This in-vivo study was carried out to measure critical morphology of pulp chamber of mandibular molar using intra-oral periapical radiograph. Materials and Methods: Mandibular molar teeth of 56 patients were evaluated. The mandibular molar teeth whose pulp chamber was not violated by caries, restoration, fracture crown and those having closed apex were included in the study. The intraoral periapical radiographs were taken with paralleling angle technique using radio-opaque grid with 1 mm space. This grid was placed directly on the film. Results: In 94% of the mandibular first molars specimens the pulp chamber ceiling was at the level of the cemento-enamel junction. The measurements showing the lowest percentage variance were buccal cusp to furcation (approximately 11%) and buccal cusp to pulp chamber ceiling (approximately 15%). The distance from the cusp tip to pulp chamber ceiling height was approximately 6.0 mm, the distance from the pulpal floor to the furcation was approximately 3.0 mm, and the average height of a pulp chamber was 1.5 to 2.0 mm. Conclusion: The exact knowledge of distances of pulp chamber from various anatomical landmarks helps in proper assessment of root canals and ultimately avoids the failure of root canal treatment.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.297-307
• /
• 2010

Noncarious cervical lesions(NCCLs) are characterized as structural defects found on the tooth surface of the cement-enamel junction. Loss of tooth structure through noncarious mechanisms may vary in etiology and clinical presentation for each individual but presently many clinician now classify this as tooth failure of abfraction due to the stress applied in the cervical area of the tooth under oral physiological and pathological loads. In the current study, we investigated the stress distribution of maxillary premolar with NCCL using simulated 3D finite element analysis. The results were as follows: 1. In the sound maxillary premolar, the stresses were highly concentrated at cervical enamel surface of the mesiobuccal line angle, asymmetrically. 2. Once the lesion has been formed, the highest stress concentration was observed around the apex of the wedge shaped lesion. 3. In four types of NCCL, the patterns of stress distribution were similar and the peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 4. Lesion cavity modification of rounding apex, reduced stress of lesion apex. 5. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.290-295
• /
• 2011

During tooth formation, tooth development can be affected by physical action or metabolic changes around dental follicle. Especially trauma to primary dentition is the most representative physical factor that can cause development disorders of succedaneous tooth. Enamel hypoplasia and crown discoloration of succedaneous tooth are common complications of trauma. And impaction, ectopic eruption, arrest of root formation and root dilaceration of succedaneous tooth are rare. In this case, a 6-year and 5-month-old female patient visited for dental evaluation after trauma. She was diagnosed with alveolar bone fracture near upper front teeth, extrusion of the upper right and left primary central incisors, intrusion of the upper right primary lateral incisor, and palatal luxation of the upper left primary lateral incisor. Upper right and left primary central incisors with severe mobility were extracted, with gingival suture on the day of the visit. During 24 months check up, root dilacerations were found near the cemento enamel junction in the upper lateral incisors and arrests of root formation were found on the coronal 1/3 of the root in the upper central incisors. Although alveolar bone fracture is rare type of trauma in children, a thorough examination of alveolar bone is essential for prognosis and following treatment in patients with trauma.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.86-91
• /
• 2022

Two-photon fluorescence microscopy was performed on the enamel-dentin junction area of a human tooth using a femtosecond pulsed laser. We obtained a clear image contrast between the bright dentin and dark tubules with the autofluorescence generated from the endogenous fluorophores in dentin. The autofluorescence shows a broad spectrum due to complex cross links between dentinal collagens, which extend from blue to orange wavelengths (470-590 nm), but a gradual autofluorescence loss in photobleaching was observed for a long-term exposure under strong excitation. For increasing excitation power, we found that two-step decay becomes significant in the spectrally integrated autofluorescence.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.155-161
• /
• 2017

Teeth and bones are highly mineralized tissues containing inorganic minerals such as calcium phosphate, and a growing number of evidences show that their mineral content is associated with many diseases. Although the quantification of mineral contents by micro-computed tomography(micro- CT) has been used in diagnosis and evaluation for treating bone diseases, its application for teeth diseases has not been well established. In this study, we attempted to estimate a usefulness of a high-resolution micro-CT in analysis of human teeth. The teeth were scanned by using the Skyscan 1172 micro-CT. In order to measure tooth mineral content, beam hardening effect of the machine was corrected with a radiopaque iodine-containing substance, iodoacetamide. Under the maximum resolution of $6.6{\mu}m$, X-ray densities in teeth and hydroxyapatite standards were obtained with Hounsfield unit (HU), and they were then converted to an absolute mineral concentration by a CT Analyzer software. In enamel layer of cusp area, the mean mineral concentration was about $2.14mg/mm^3$ and there was a constant mineral concentration gradient from the enamel surface to the dentinoenamel junction. In the dentin of middle 1/3 of tooth, the mean mineral concentration was approximately $1.27mg/mm^3$ and there was a constant mineral concentration gradient from the outer of root to the pulp side, ranging from 1.3 to $1.06mg/mm^3$. In decay region of dentin, the mineral content was gradually decreased from the intact inner side to the decayed surface. These results suggest that high-resolution micro-CT can be as a useful tool for non-invasive measurement of mineral concentration in teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.152-157
• /
• 2005

Hypophosphatemia rickets, also known as Vitamin D-resistant rickets(VDRR) and refractory rickets, is a form of rickets which is resistant to the usual doses of vitamin D. VDRR is characterized by decreased renal tubular reabsorption of inorganic phosphate and is easily diagnosed by a normal blood calcium, hypophosphatemia, and slightly elevated alkaline phosphatase. Clinical features of Hypophosphatemia rickets included lateral bowing deformities of the legs, short stature, scoliosis, and enlargement of wrist and ankles. Dental finding in patient with VDRR were spontaneous dental abscesses in caries free teeth and other dental findings included delayed eruption, delayed apical closure, thin and hypoplastic enamel, absent or poorly defined lamina dura, enlarged pulp chambers, and numerous accessory canals and pulp horns that extend up and into the dentinoenamel junction. we reported the clinical feature and treatment of VDRR child who was referred from the department of pediatrics for early loss of primary teeth and its treatment.

• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.87-94
• /
• 2017

Objectives: Chitosan has been widely investigated and used. However, the literature does not refer to the shelf life of this solution. This study evaluated, through the colorimetric titration technique and an analysis of dentin micro-hardness, the shelf life of 0.2% chitosan solution. Materials and Methods: Thirty human canines were sectioned, and specimens were obtained from the second and third slices, from cemento-enamel junction to the apex. A 0.2% chitosan solution was prepared and distributed in 3 identical glass bottles (v1, v2, and v3) and 3 plastic bottles (p1, p2, and p3). At 0, 7, 15, 30, 45, 60, 90, 120, 150, and 180 days, the specimens were immersed in each solution for 5 minutes (n = 3 each). The chelating effect of the solution was assessed by micro-hardness and colorimetric analysis of the dentin specimens. 17% EDTA and distilled water were used as controls. Data were analyzed statistically by two-way and Tukey-Kramer multiple comparison (${\alpha}=0.05$). Results: There was no statistically significant difference among the solutions with respect to the study time (p = 0.113) and micro-hardness/time interaction (p = 0.329). Chitosan solutions and EDTA reduced the micro-hardness in a similar manner and differed significantly from the control group (p < 0.001). Chitosan solutions chelated calcium ions throughout the entire experiment. Conclusions: Regardless of the storage form, chitosan demonstrates a chelating property for a minimum period of 6 months.