• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.60-69
• /
• 2003

The simplified two-color method is proposed which can estimate the temperature distribution and the soot density of the whole flame with the image analysis of the high-speed photographs. The factors influenced on its processing were examined, for example, the selection of the wave length, the kind of films, the preparation of the calibration curve between the radiance of flame and the luminance temperature. The simplified two-color method reported in this paper can be used as a tool for the improvement of the combustion process in direct injection diesel engine.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.885-897
• /
• 2009

In order to make sure the impact of spatial resolution of wind energy map on the estimation of wind power density in the Korean Peninsula, the comparison studies on the characteristics of wind energy map with three different spatial resolutions were carried out. Numerical model used in the establishment of wind map is MM5 (5th generation Mesoscale Model) with RBAPS (Regional Data Assimilation and Prediction System) as initial and boundary data. Analyzed Period are four months (March, August, October, and December), which are representative of four seasons. Since high spatial resolution of wind map make the undulation of topography be clear, wind pattern in high resolution wind map is correspond well with topography pattern and maximum value of wind speed is also increase. Indication of island and mountains in wind energy map depends on the its spatial resolution, so wind patterns in Heuksan island and Jiri mountains are clearly different in high and low resolutions. And area averaged power density can be changed by estimation method of wind speed for unit area in the numerical model and by treatment of air density. Therefore the studiable resolution for the topography should be evaluated and set before the estimation of wind resources in the Korean Peninsula.

• Computers and Concrete
• /
• v.7 no.3
• /
• pp.271-283
• /
• 2010

Testing of ultrasonic pulse velocity (UPV) is one of the most popular and actual non-destructive techniques used in the estimation of the concrete properties in structures. In this paper, artificial neural network (ANN) approach has been proposed for the evaluation of relationship between concrete compressive strength, UPV, and density values by using the experimental data obtained from many cores taken from different reinforced concrete structures with different ages and unknown ratios of concrete mixtures. The presented approach enables to find practically concrete strengths in the reinforced concrete structures, whose records of concrete mixture ratios are not yet available. Thus, researchers can easily evaluate the compressive strength of concrete specimens by using UPV values. The method can be used in conditions including too many numbers of the structures and examinations to be done in restricted time duration. This method also contributes to a remarkable reduction of the computational time without any significant loss of accuracy. Statistic measures are used to evaluate the performance of the models. The comparison of the results clearly shows that the ANN approach can be used effectively to predict the compressive strength of concrete by using UPV and density data. In addition, the model architecture can be used as a non-destructive procedure for health monitoring of structural elements.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.103-110
• /
• 2012

The population growth along with the urbanization, has caused more problems in many public areas, such as subway airport terminals, hospital, etc. Many surveillance systems have been installed in the public areas, but not all of those can be monitored in real-time, because the operators that observe the monitors are very small compared with the number of the monitors. For example, the observer can miss some crucial accidents or detect after considerable delays. Thus, intelligent surveillance system for preventing the accidents are needed, such as Intelligent Surveillance Systems. in this paper, we propose a new crowd density estimation method which aims at estimating moving crowd using images from surveillance cameras situated in outdoor locations. The moving crowd is estimated from the area where using optical flow. The edge information is also used as feature to measure the crowd density, so we improve the accuracy of estimation of crowd density. A multilayer neural network is designed to classify crowd density into 5 classes. Finally the proposed method is experimented with PETS 2009 images.

• Journal of applied mathematics & informatics
• /
• v.41 no.6
• /
• pp.1341-1364
• /
• 2023

This article introduces a method for estimating the conditional hazard function of a real-valued response variable based on a functional variable. The method uses local linear estimation of the conditional density and cumulative distribution function and is applied to a functional stationary ergodic process where the explanatory variable is in a semi-metric space and the response is a scalar value. We also examine the uniform almost complete convergence of this estimation technique.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.531-536
• /
• 2022

This paper compared the performance of the parametric method and the nonparametric method when estimating the distribution for the tail of the distribution with heavy tails. For the parametric method, the generalized extreme value distribution and the generalized Pareto distribution were used, and for the nonparametric method, the kernel density estimation method was applied. For comparison of the two approaches, the results of function estimation by applying the block maximum value model and the threshold excess model using daily fine dust public data for each observatory in Seoul from 2014 to 2018 are shown together. In addition, the area where high concentrations of fine dust will occur was predicted through the return level.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.396-401
• /
• 2002

A practical method for evaluating the possibility of the occurrence of cracking in actual thick-plate T-joint weldments is presented in this study. Systematic experiments based on the method of the design of experiment are conducted in order to investigate the crack tendency in relation to typical welding parameters such as diffusible hydrogen, restraint intensity, preheating temperature and so on. The elastic analysis using the [mite element techniques is employed to quantify the restraint intensities of the specimens. The defined restraint intensities are treated in numerical way for the sake of considering the most uncertain factor among some major factors that govern the cracking phenomena due to welding. The critical plane for judgment of the crack occurrence or crack density is presented as a function of typical welding parameters including determined restraint intensities. The results of numerical estimation by the proposed method for the experimental specimens show the usefulness as a practical tool in welding induced crack problem having extensive uncertainties.

• The Korean Journal of Applied Statistics
• /
• v.28 no.5
• /
• pp.895-906
• /
• 2015

Diffusion is a mathematical tool to explain the fluctuation of financial assets and the movement of particles in a micro time scale. There are ongoing statistical trials to develop an estimation method for diffusion models based on likelihood. When we estimate diffusion models by applying the maximum likelihood estimation method on data observed at discrete time points, we need to know the transition density of the diffusion. In order to approximate the transition densities of diffusion models, we suggests the method to approximate the path integral of the random process with normal random variables, and compare the numerical properties of the method with other approximation methods.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.460-475
• /
• 2018

In the variable-speed wind energy system, to achieve maximum power point tracking (MPPT), the wind turbine should run close to its optimal angular speed according to the wind speed. Non-linear control methods that consider the dynamic behavior of wind speed are generally used to provide maximum power and improved efficiency. In this perspective, the mechanical power is estimated using Kalman filter. And then, from the estimated mechanical power, the wind speed is estimated with Newton-Raphson method to achieve maximum power without anemometer. However, the blade shape and air density get changed with time and the generator efficiency is also degraded. This results in incorrect estimation of wind speed and MPPT. It causes not only the power loss but also incorrect wind resource assessment of site. In this paper, the adaptive maximum power point tracking control algorithm for wind turbine system based on the estimation of wind speed is proposed. The proposed method applies correction factor to wind turbine system to have accurate wind speed estimation for exact MPPT. The proposed method is validated with numerical simulations and the results show an improved performance.

• Land and Housing Review
• /
• v.2 no.3
• /
• pp.217-226
• /
• 2011

The Seoul Metropolitan Government is striving to minimize the amount of traffic according to the supply of apartment houses along with the solution of housing shortage for the low income people through high density development near the subway area. Therefore, a stronger policy is necessary to control the traffic of the passenger cars in a subway area for the successful high density development focusing on public transportation, and especially, the estimation of the demand of cars with high reliability is necessary to control the demand of parking such as the limited supply of parking lot. Accordingly, this study developed car ownership forecasting model using Look-up Table among category analyses which are easy to be applied and have high reliability. The estimation method using Look-up-Table is possible to be applied to both measurable and immeasurable types, easy to accumulate data, and features the flexible responding depending on the changes of conditions. This study established Look-up-Table model through the survey of geographical location, the scale of housing, the accessible distance to a subway station and to a bus station, the number of bus routes, and the number of car owned with data regarding 242 blocks in Seoul City as subjects.