• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.295-300
• /
• 1994

It was the purpose of present study to develop a new thermoseed for heating deep-seated tumors and assessment of the effect of magnetic control on thermoseeds. Aqueous suspension of iron micro spheres (Ferropolysaccharide) was injected directly into the VX-2 hepatoma and heated with 1.2 MHz inductive radiofrequency unit. Aqueous thermoseed suspension was delivered to the tumor by simple percutaneous injection. The limitation of the thermoseed heating method is the positional change of thermoseed particles in the tumor after implantation. The thermoseed particles could enter the systemic blood circulation and cause a severe embolization of a critical organ. To minimize this limitation, we have used the magnetic control after loading the thermoseed in the tumor, W hen ferropolysaccharides were exposed to a strong magnetic field, they magnetized and subsequently exerted a magnetic force on each other, forming larger aggregates of particles. The size of aggregated Particles were too big to enter the systemic blood circulation. Thus, unlike other thermoseed method, we hold the thermoseed particles stationary in the tumor. The temperature of the injected site and immediate vicinity elevated by $4-5^{\circ}C$. The temperature of the surrounding normal hepatic tissue elevated by $1-2^{circ}C$ only. The heating effect within the tumor was variable depending on the density of ferromagnetic aqueous suspension. Our results suggest that inductive heating of tumor injected with ferropolysaccharide solution offers the possibility of effective heat delivery to the defined tumor volume, which is difficult to heat with other heating devices.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.3
• /
• pp.26-38
• /
• 2006

For both a healthy environment and sustainable development, we frame a habitat assessment method, concerning biodiversity and physical characteristics. With the method, we set up and extract conservation areas from Peace Valley Resort Development Areas which can function as habitats. Absolute and relative assessment items which are the size of area, habitation of species with conservation value, distribution of communities, functions of habitats, ratio of non-native plants, connectivity of habitats, vegetation layers of forests and age of forests, and water systems are considered on newly extracted conservation areas, and the habitat value assessment was calculated on the items in a 3-point scale. By comparing and examining 3 existing proposals for extracted conservation areas, we assess existing proposals, make an alternative proposal, and try to verify the possibility of applicability to extracted conservation areas. Proposal A and C must not be adopted since almost all conservation areas would be developed in the proposals. Proposal B, consisting of 53% development areas and 47% non-development areas, does not have enough development areas, so high density building arrangements should be encouraged in order to preserve conservation areas. Therefore, proposal B would be the best in ecological terms among the 3 proposals, if 3 conditions are considered : 1) new extracted conservation areas should be conserved; 2) 10~15m wide green-zones on both sides of the water system, which can play a role as ecological corridors, should be considered in development areas; 3) building arrangement should not interrupt the ecological corridors.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.61-71
• /
• 2006

Environment-friendly shock-absorbing (cushioning) materials were made using a vacuum forming method from waste wood collected from local mountains in Korea. The waste wood was pulped by thermomechanical pulping. The TMP cushions showed superior shock-absorbing properties with lower elastic moduli compared to EPS(Expanded Polystyrene) and pulp mold. Even though the TMP cushions made using at different suction times had many free voids in their inner fiber structures, their apparent densities were a little higher than EPS and much lower than pulp mold. The addition of cationic starch improved elastic modulus of the TMP cushions without increasing the apparent density, which was different from surface sizing with starch. The porosity of the TMP cushions was a little greater than EPS and much less than pulp mold. Finally, the TMP cushions have great potential to endure external impacts occurring during goods distribution.

• Smart Structures and Systems
• /
• v.14 no.5
• /
• pp.901-916
• /
• 2014

Magnetorheological (MR) fluid is one of the field-responsive fluids that is of interest to many researchers due to its high yield stress value, which depends on the magnetic field strength. Similar to electrorheological (ER) fluid, the combination of working modes is one of the techniques to increase the performance of the fluids with limited focus on MR fluids. In this paper, a novel MR testing cell incorporated with valve, shear and squeeze operational modes is designed and constructed in order to investigate the behaviour of MR fluid in combined mode. The magnetic field distribution in the design concept was analyzed using finite element method in order to verify the effective areas of each mode have the acceptable range of flux density. The annular gap of valve and shear were fixed at 1 mm, while the squeeze gap between the parallel circular surfaces was varied up to 20 mm. Three different coil configurations, which were made up from 23 SWG copper wires were set up in the MR cell. The simulation results indicated that the magnetic field distributed in the squeeze gap was the highest among the other gaps with all coils were subjected to a constant applied current of 1 A. Moreover, the magnetic flux densities in all gaps were in a good range of magnitude based on the simulations that validated the proposed design concept. Hence, the 3D model of the MR testing cell was designed using Solidworks for manufacturing processes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.497-504
• /
• 2020

A technique was developed for analysis on sonic boom created by supersonic flight and for prediction of its sound level and atmospheric propagation characteristics. It is of great importance to anticipate sound level of sonic boom because it causes environmental issue. For that purpose, the simplified sonic-boom prediction method was applied to calculate sound pressure according to physical properties and flight information of the object and distance to measurement site, in this study. Propagation characteristics of shock wave emanated from a flying object was analyzed by using line-of-sight vector and ray tracing method which dealt with refraction of wave due to atmospheric density distribution along altitude. Predicted results agreed well with measured data from real flight.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.175-181
• /
• 1999

There are issues regarding how some of traffic parameters should be set so that ATM and non-ATM service parameters can be compatible. For example, policing method used by frame relay based on CIR(committed information rate) will not exactly match the ATM UPC(Usage Parameter Control) method. ATM and the frame relay have different transfer modes and traffic parameters. The cells and frames are police by their own traffic control schemes. For the same information, the real traffic of the ATM side takes greater bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. IN both networks this bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. In both networks this bandwidth ratio should be considered on traffic parameter mapping to maintain their QoS and to perform efficient network resource management. In this paper we describe traffic parameter mapping schemes between frame relay and ATM in ATM network and how to expect the bandwidth ratio to maintain FR QoS in ATM network. We assumed frame length distribution to Erlang or Exponential probability density function.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.15-22
• /
• 2011

It is necessary to describe the hysteresis characteristics of magnetic material precisely for the analysis or design of system with ferromagnetic materials. Although Preisach model is regarded as the most accurate method to describe the hysteresis characteristics, it is not widely applied to the real systems because of some difficulties. The conventional Preisach model shows the numerical instabilities during the iterative computations because the density distribution obtained from the sets of M-H curves are strongly localized. To remove such numerical instabilities, M-B instead of M-H is adopted as an implementation variable in normal Preisach modeling. The two dimensional computations with hysteresis characteristics by using normal Preisach modeling are tested and the result showed that the modeling by using M-B variables showed better stabilities than M-H variables.

• Journal of Hydrogen and New Energy
• /
• v.26 no.3
• /
• pp.227-233
• /
• 2015

In this study, we evaluate catalytic activity of Pd/C catalyst that is synthesized by modified polyol method. With such formed Pd/C is used as anodic catalyst for direct formic acid fuel cell (DFAFC) and performances of the DFAFC are measured to verify whether the new catalyst is effective for enhancing DFAFC performance and to determine optimal loadings of the Pd/C needed for obtaining best DFAFC performance. Pd particle distribution of the Pd/C catalyst is analyzed by TEM, while its catalytic activity is estimated by using cyclic voltammogram (CV) as measuring formic acid oxidation reaction and active surface area. As a result of that, the Pd/C catalyst synthesized by modified polyol shows better catalytic activity and DFAFC performance with small loading amount of Pd/C. When loading amount of Pd/C is $1.5mgcm^{-2}$, maximum power density of DFAFC adopting the catalyst is $122mWcm^{-2}$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.215-221
• /
• 2014

In this paper, the improved power durability test system and method for an reliability analysis of SAW device is proposed and the failure mechanism through failure analysis is analyzed. As a result of the failure analysis using microscope, SEM and EDX, the failure mechanism of the SAW device is electromigration due to joule heating under high current density and high temperature condition. The electromigration makes voids and hillocks in the IDT electrode and the voids and hillocks can lead to short circuit and open circuit faults, respectively, increasing the insertion loss of an SAW filter. The accelerated life testing of the SAW filter for 450MHz CDMA application using the proposed power durability test system and method is carried out. $B_{10}$ lifetime of the SAW filter using Eyring model and Weibull distribution is estimated as about 98,500 hours.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.23-33
• /
• 1991

Mn - Zn Ferrite has the natural characteristics of incongruent melting and the zinc oxide evaporation while the crystal is being grown. As a result of these, it comes into existence to be a non-uniform distribution of cations along the crystal growth axis and also Pt particles are usually precipitated into the crystals in Bridgman method since the melt zone is maintained for a long time in the crucible. These have bad effects on the magnetic properties of ferrites. But, to overcome these faults and then acquire the better single crystals. new modified growth method was developed and the growth factors were investigated as following: melt height in the crucible, surface tension and density of melt, the behavior of melt at interface, the shapes of crucible and solid -liquid interface, powder feeding rate, and the crystal growing speed. In additon, when we analyzed the compositional fluctuations of grown crystals, they were supressed within 1.5 mol% $Fe_20_3$, 2 mol% MnO, ZnO respectively with comparing to initial composition of crystal and the microstructures of crystals on the(110) plane were observed by optical microscope through the chemical etching technique and the magnetic properties were determined.