• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.42-50
• /
• 2013

1980년대 중반 이후 국내 생산이 시작된 온돌마루(이하 합판마루)는 종전의 주택용 바닥재(PVC 바닥재)의 대체재로서 일반 소비자들의 폭발적인 수요를 얻어왔다. 그러나 최근 마루판 산업은 건축경기 악화 및 산업 환경의 변화로 인한 수요의 감소와 그에 따른 생산율의 저하 등의 근본적인 문제점이 있다. 최근 마루판용 합판의 원재료로 주로 사용된 동남아산 수종의 고갈 및 변화로 인한 양질의 합판원재료 확보가 어려워졌다. 이에 대한 대응책으로 중국산 유칼립투스를 원재료로 부분적으로 이용한 마루판용 합판의 대체이용이 시도되고 있다. 본 연구에서는 유칼립투스 단판을 부심판으로 제조한 복합합판의 마루판용 합판의 원재료로서의 사용 가능성을 실험을 통해 비교분석하였으며, 모든 단판이 동남아산 Meranti로 구성된 합판을 대조군으로 설정했다. 변형에 영향을 미치는 인자로 단판 간 밀도차이와 합판의 밀도경사를 이용하였다. 본 연구의 실험결과는 다음과 같다. 1) 남양재 시험편은 병판의 밀도가 다른 단판의 밀도보다 큰 M자형의 밀도경사, 유칼립투스 시험편은 반대성향의 W자형의 밀도경사를 나타내었다. 2) 종류에 따른 마루판의 변형은 마루 가공 시험편이 합판상태로 가공을 한 경우보다 최소 0.1~최대 6.25 mm 적게 나타났으며, Density Profile 측정 결과 단판 간의 밀도차가 클수록 변형이 많이 발생하였다.

• 대한디지털의료영상학회논문지
• /
• 제10권1호
• /
• pp.35-40
• /
• 2008

I.objective The composition method with acquiring 2${\sim}$5 image not only lack perfection in compensating the geometrical distortion but could also cause inaccurate connection problem of compensating the geometrical distortion but could also cause inaccurate connection problem of continuing bone structure due to the enlargement ratio difference of ruller and bone, density difference in image composition process. This paper studies those mentioned problems through the experiments. II. Object and method Experiment 1 After attaching 3 step wedge(Pb) on detector and 2 ruller on upper, lower part of the step wedge, we have exposed them to create density difference between 1st image and 2nd image, then examined if there were any errors. Experiment 2 1st 100cm ruller was attached on the center of detector, and by escalating the distance between 2nd 100cm ruller and detector 5cm, 10cm, 15cm respectively, we investigated if there any errors caused by enlargement ratio. Experiment 3 The ruller was placed on detector, a joint photographing was performed through spot photographing after fully operating the electric field photographing to include hip joint ${\sim}$ ankle joint part and we have compared the values from two methods. III. Result : A horizontal axis error was caused when photopraphing is not poerated in equal density since the image shifted horizontally in accordance with the difference of Pb step wedge 1 due to the density difference, as the result of Epperiment 1.

• 한국환경보건학회지
• /
• 제45권5호
• /
• pp.497-510
• /
• 2019

Objectives: The aim of this study was to secure the reliability of using the CalTOX model when evaluating LADD (or ADD) and Risk (or HQ) among local residents for the emission of BTEX (Benzene, Toluene, Ethylbenzene, Xylene) and by closely examining the difference in the confidence interval of the assessment outcomes according to the difference in the probability density function of input variables. Methods: The assessment was made by dividing it according to the method ($I^{\dagger}$) of inputting the probability density function in meteorological variables of the model with log-normal distribution and the method of inputting ($II^{\ddagger}$) after grasping the optimal probability density function using @Risk. A T-test was carried out in order to analyze the difference in confidence interval of the two assessment results. Results: It was evaluated to be 1.46E-03 mg/kg-d in LADD of Benzene, 1.96E-04 mg/kg-d in ADD of Toluene, 8.15E-05 mg/kg-d in ADD of Ethylbenzene, and 2.30E-04 mg/kg-d in ADD of Xylene. As for the predicted confidence interval in LADD and ADD, there was a significant difference between the $I^{\dagger}$ and $II^{\ddagger}$ methods in $LADD_{Inhalation}$ for Benzene, and in $ADD_{Inhalation}$ and ADD for Toluene and Xylene. It appeared to be 3.58E-05 for risk in Benzene, 3.78E-03 for HQ in Toluene, 1.48E-03 for HQ in Ethylbenzene, and 3.77E-03 for HQ in Xylene. As a result of the HQ in Toluene and Xylene, the difference in confidence interval between the $I^{\dagger}$ and $II^{\ddagger}$ methods was shown to be significant. Conclusions: The human risk assessment for BTEX was made by dividing it into the method ($I^{\dagger}$) of inputting the probability density function of meteorological variables for the CalTOX model with log-normal distribution, and the method of inputting ($II^{\ddagger}$) after grasping the optimal probability density function using @Risk. As a result, it was identified that Risk (or HQ) is the same, but that there is a significant difference in the confidence interval of Risk (or HQ) between the $I^{\dagger}$ and $II^{\ddagger}$ methods.

• 한국치위생학회지
• /
• 제14권3호
• /
• pp.319-326
• /
• 2014

Objectives : The purpose of the study is to investigate the factors affecting the bone density and the relationship between bone density and remaining teeth by using data from 2007 to 2009 of the 4th Korean National Health and Nutrition Examination Survey(KNHANES). Methods : The subjects were 1,829 postmenopausal women over 50 years old from the data of the 4th KNHANES. Results : The bone density had the significant difference in 'age' and 'level of education' and remaining teeth had the significant difference in age, monthly income and level of education. The bone mineral density and remaining teeth had the significantly different from subjective general health, smoking, drinking, physical activity. The oral health behaviors and remaining teeth had the significantly associated in subjective oral health status, frequency of tooth brushing, use of auxiliary oral hygiene product, and recent oral examination. Conclusions : The number of remaining teeth is below 9.27 compared with the normal group.

• 한국식품영양학회지
• /
• 제27권4호
• /
• pp.732-741
• /
• 2014

Korean foods have the strengths to addresssome of the health problems of modern man. To assess the properties of Korean noodles, daily value %, DVS, DDS and energy density were compared between many kinds of noodles from around the world. Using a variety of reference materials, a nutritional database of noodles was built for this study. For carbohydrate, lipid, vitamin A, vitamin K, vitamin C, niacin, zinc, and copper, the daily values % of western noodles were significantly higher. Also, the serving size of Korean noodles was significantly small. Comparing the average energy density of the noodles, they showed $1.87{\pm}0.93kcal/g$ (Korean noodles), $2.42{\pm}1.08kcal/g$ (western noodles) and $1.84{\pm}0.84kcal/g$ (other noodles). The dietary fiber, polyphenols, and flavonoids content of the noodles showed no significant difference. Neither DVS nor DDS showed a statistically significant difference. In the Korean noodles, the GMDFV pattern showed a diverse choice of food groups. Korean noodles show a lower energy density, and the small serving size to have favorable for the prevention of obesity. Thus, Korean noodles are an excellent choice in terms of diversity and energy density.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.183-190
• /
• 2012

PURPOSES : The fundamental diagram provides basic information necessary in the analysis of traffic flow and highway operation. When traffic flow is congested, the density-flow points in the fundamental diagram are widely scattered and move in a stochastic manner. This paper investigates the pattern of density-flow point transitions and identifies car-following behaviors underlying the density-flow transitions. METHODS : From a microscopic analysis of 722 fundamental diagrams of NGSIM data, a total of 20 transition patterns of fundamental diagrams are identified. Prominent features of the transition patterns are explained by the behavior of the leader and follower. RESULTS : It is found out that the average speed and the speed difference between the leader and the follower critically determine the density-flow transition pattern. The density-flow path is very sensitive to the values of vehicle speed and spacing especially at low speed and high density such that most fluctuations in the fundamental diagram in the congested regime is due to the noise of speed and spacing variations. CONCLUSIONS : The result of this study suggests that the average speed, the speed difference between the leader and the follower, and the random variations of speed and spacing are dominant factors that explain the transition patterns of a fundamental diagram.

• 한국물환경학회지
• /
• 제35권6호
• /
• pp.557-566
• /
• 2019

Paldang is a river reservoir in the Midwest of Korea, which is a drinking water source for the metropolitan area. Since the Paldang Reservoir is shallow, and has a short hydraulic residence time, its water quality is directly impacted by two incoming rivers, the north Han River (NHR) and the south Han River (SHR). The NHR has different seasonal patterns of water temperature from the SHR because the NHR is greatly impacted by the discharge water from upstream dams. The electrical conductivity (EC) and other material concentrations of the SHR are usually higher than those of the NHR because its basin is limestone-based. The difference in water temperature in the two rivers causes density flow, and the distribution of the EC within the reservoir can be an indicator for monitoring density flow. From the vertical gradient of the EC at the dam site, from spring to fall, it was confirmed that the SHR flowed into the upper layer, and the NHR flowed into the lower layer, and vice versa at other times. The relative difference (RD) of the EC between the upper layer and the lower layer at the dam site was used as an indicator for density flow. The RD of the EC showed a very significant correlation with the RD of total organic carbon (r = 0.70, p < 0.001) and the RD of total nitrogen (r = 0.58, p < 0.01). This relationship is based on the assumption that the difference in electrical conductivity and water quality between the SHR and the NHR is constant. However, in many cases this assumption is inconsistent. Thus, further study is needed on more suitable indicators to evaluate the impact of density flow on water quality.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.181-182
• /
• 2003

A preconditioned numerical method for gas-liquid to-phase flow is applied to solve cavitating flow. The present method employs a density based finite-difference method of dual time-stepping integration procedure and Roe's flux difference splitting approximation with MUSCL-TVD scheme. A homogeneous equilibrium cavitation model is used. The method permits simple treatment of the whole gas-liquid two-phase flow field including wave propagation, large density changes and incompressible flow characteristics at low Mach number. By this method, two-dimensional internal flows through a venturi tuve and decelerating cascades are computed and discussed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.229-235
• /
• 2010

Purpose: This study examined the significance of increased bone density according to time after implantation on maxilla using demographic data with CBCT and compared the bone density between before vs. after implantation using the Hounsfield index. Materials and Methods: Twenty-five implant site on maxilla were selected. Cone-beam computerized tomography (CBCT) scans were used for the analysis. The implant sites were evaluated digitally using the Hounsfield scale with EzImplant TM and the results were compared over time. Statistical data over time was carried out to determine the correlation between the recorded Hounsfield unit (HU) over time and gender difference using repeated ANOVA. Results: The bone density of implantation site over time showed an increase in the HU mean values. Immediately after implantation, bone density was significantly increased than bone density before implantation. Until 6 month follow-up, bone density showed stable increasement. There is no significant difference on gender. Conclusions: Using CBCT, bone density increased over time after implantation on maxilla. Bone density measurements using CBCT might provide an objective assessment of the bone quality as well as the correlation between bone density and stability of implant.

• 한국정보통신학회논문지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2020

FCM(Fuzzy C-Means)으로 대표되는 퍼지 클러스터링은 간단하면서도 효율적인 클러스터링 방법이지만, FCM에서 사용하는 목적 함수에서는 밀도가 높은 클러스터가 클러스터링 결과에 많은 영향을 미치도록 함으로써 클러스터 사이의 밀도 차에 의해 클러스터링 결과에 왜곡이 발생할 수 있다. 이러한 밀도 문제를 완화하는 방법의 하나로 FCM의 목적 함수에 밀도 차이를 보정할 수 있는 항을 추가한 EDI-FCM(Extended Density-Independent FCM)이 있다. 이 논문에서는 레귤러라이제이션을 이용하여 EDI-FCM을 보완한 Regularized EDI-FCM을 제안한다. 레귤러라이제이션은 해공간을 평탄화하고 잡음 민감성을 줄이기 위해 흔히 사용되는 방법으로, 클러스터링에서는 특정 클러스터가 클러스터링 결과에 미치는 영향을 줄이는 역할을 한다. 제안하는 방법은 FCM이나 EDI-FCM과 비교했을 때 실제 클러스터 중심에 빠르고 정확하게 수렴한다는 것을 실험 결과를 통해 확인할 수 있다.