• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.210-216
• /
• 1990

This study was performed to obtain fundamental data on temperature increases in the dental tissues irradiated by IO.opm laser radiation. For this purpose a experimental facility was established. which was composed of a CO2 laser. a shutter unit and a temperature sensing device. The temperature changes in the pulp chamber of extracted molars. during and after the laser irradiation. were measured as function of laser power. the time of irradration and the thickness of the sample. An empirical formula for the maximum temperature increases, $\DeltaT_m$ was derived from the measured data as follows; $\DeltaT_m=\alphaP\Delta\tauexp(-\betad)$$ where P. $\Delta\tau$ and d are the laser power(W). irradiation time{sec) and the thickness(mm) between pulp chamber and occlusal surface. respectively. Also a theoretical calculation model based on simplified assumptions were established and the results from the calculation were compared with the measured temperature data. A fairly good agreement was obtained.obtained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.669-675
• /
• 2005

This paper proposes coordinates transformation and calibration algorithm using 3D parabolic coordinate transformation and delta-bar-delta neural algorithm for the omni-directional image captured by catadioptric camera. Experimental results shows that the proposed algorithm has accuracy and confidence in coordinate transformation which is sensitive to environmental variables.

• Journal of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.157-170
• /
• 1974

The effects of ionic strength on the polynucleation reaction of tungstate ions and the protonized reaction of polytungstate ions have been investigated in the range of ionic strength from 1 M to 4 M KCl.The hexatungstate ions and the protonized forms of hexatungstate ions are formed in the tungstate solutions whose ionic strengths are 1 M to 4 M KCl. The equilibrium constants for the formation of hexatungstate ions and the protonized forms of hexatungstate ions are calculated in the range of ionic strength from 1 M to 4M KCl. The enthalpy changes for the formation of hexatungstate ions and the protonized forms of hexatungstate ions are as follows; $7H^++{6WO_4}^{2-}={HW_6O_{21}}^{5-}+3H_2O\;\;{\Delta}H^{\circ}=-62.4{\pm}0.6$$H^++{HW_6O_{21}}^{5-}={H_2W_6O_{21}}^{4-}\;\;{\Delta}H+_1^{\circ}=-4.12{\pm}0.10$$H^++{H_2W_6O_{21}}^{4-}={ H_3W_6O_{21}}^{3-}\;\;{\Delta}H_2^{\circ}=-4.36{\pm}0.30$ The free energy and entropy changes for the above reactions have been also calculated. A linear relation is formed between $log k_{6,7}$ and ionic strength, and $log k_1\;or\;log k_2\;vs{\cdot}{\mu}.$ $log k_{6,7}\;=\;D{\mu}+I,\;\;where\;D\;=\;1.66{\pm}0.02$$log k_1\;=\;D_1{\mu}+I_1,\;\;where\;D_1\;=\;-8.065{\pm}0.001$$log k_2\;=\;D_2{\mu}+I_2,\;\;where\;D_2\;=\;-0.376{\pm}0.006$

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.133-142
• /
• 1984

With the weld-joined compact tension specimens compared with each other, that is, transverse and lengthwise about the crack propagation direction, high and low in the input heat level, same as and lower than the base metal in the strength of weld material, the fatigue test were performed. With these data, the log-log curves between the fatigue crack propagation rate ${\frac{da}{dN}}$ and the transition range of the stress intensity factor ${\Delta}K$ ahead the crack tip were drawed. These curves were compared and estimated among each compared specimens, among each zones, that is, the base metal, the heat-affected metal and the weld-mixed metal, and between this study and the past studies. Basically, Little difference in the slope of the $da/dN-{\Delta}K$ relation was showed in all the welded directions, all the input heat levels and all the zones. But, First, to comparison with in the past studies about the base metals, it was showed that da/dN started in the much later rate, increased faster and stoped in the little faster rate. Second, it was showed that, near the time the crack's going from the heat-affected zone to the weld-mixed metal da/dN decreased a little for a while. Third, in the lengthwise weld compared with the transverse weld, in the high input heat weld compared with the low input heat weld in the case used the weld material of the same strength as the base metal, in the opposite case in the case used the one of the lower strength than the base metal, in the case used the weld material of the same strength as compared with the lower strength than the base metal beside the high input heat and the lengthwise weld, it was showed that the crack occured earlier in lower ${\Delta}K$ and later da/dN, the curves went with the same slope. Forth, in the lengthwise weld compared with the transverse weld in the low input heat weld, in the low input heat weld compared with the high input heat weld, it was showed that da/dN went with the lower level.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.2
• /
• pp.165-172
• /
• 2000

This study was carried out to investigate relationship between plasma $\delta$ - aminolevulinic acid (ALAP) and lead exposure indices in exposure to lead. The subjects were 218 male workers in 2 storage battery companies and 2 secondary smelting companies. Blood lead(PbB), blood zinc-protoporphyrin( ZPP), urinary $\delta$ - aminolevulinic acid (ALAU), hemoglobin(Hb), and hematocrit(Hct) were measured as lead exposure indices. The results were as follows, 1. The means of blood lead and blood ZPP concentration of subjects were $27.2{\pm}14.0{\mu}g/d{\ell}$ and $55.1{\pm}47.6{\mu}g/d{\ell}$, respectively. The means of plasma $\delta$ - ALA and urinary $\delta$ - ALA concentration were $18.9{\pm}25.1{\mu}g/d{\ell}$ and $2.1{\pm}4.6mg/{\ell}$, respectively. 2. The concentration of ALAP was $11.2{\mu}g/{\ell}$ for below $20{\mu}g/d{\ell}$ PbB, $12.8{\mu}g/{\ell}$ for from $21-40{\mu}g/d{\ell}$ PbB, and $51.2{\mu}g/{\ell}$ for over $40{\mu}g/d{\ell}$ PbB, respectively. 3. ALAP was significantly correlated with ALAU(r=0.829, p<0.01), ZPP(r=0.724, p<0.01) and PbB(r=0.552, p<0.01).

• Molecules and Cells
• /
• v.40 no.12
• /
• pp.945-953
• /
• 2017

We report the biological functions of a zebrafish homologue of RING-finger protein 152 (rnf152) during embryogenesis. rnf152 was initially identified as a brain-enriched E3 ligase involved in early embryogenesis of zebrafish. Expression of rnf152 was ubiquitous in the brain at 24 hpf but restricted to the eyes, midbrain-hindbrain boundary (MHB), and rhombomeres at 48 hpf. Knockdown of rnf152 in zebrafish embryos caused defects in the eyes, MHB, and rhombomeres (r1-7) at 24 hpf. These defects in rnf152-deficient embryos were analyzed by whole-mount in situ hybridization (WISH) using neuroD, deltaD, notch1a, and notch3 probes. NeuroD expression was abolished in the marginal zone, outer nuclear layer (ONL), inner nuclear layer (INL), and ganglion cell layer (GCL) of the eyes at 27 hpf. Furthermore, deltaD and notch1a expression was remarkably reduced in the ONL, INL, subpallium, tectum, cerebellum, and rhombomeres (r1-7) at 24 hpf, whereas notch3 expression was reduced in the tectum, cerebellum, and rhombomeres at 24 hpf. Finally, we confirmed that expression of Notch target genes, her4 and ascl1a, also decreased significantly in these areas at 24 hpf. Thus, we propose that Rnf152 is essential for development of the eyes, midbrain and hindbrain, and that Delta-Notch signaling is involved.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.87-93
• /
• 2015

In this paper, a $145{\mu}W$, 87dB SNR, Low power 3rd order Sigma-Delta Modulator with Op-amp sharing is proposed. Conventional architecture with analog path and digital path is improved by adding a delayed feed -forward path for disadvantages that coefficient value of the first integrator is small. Proposed architecture has a larger coefficient value of the first integrator to remove the digital path. Power consumption of proposed architecture using op-amp sharing is lower than conventional architecture. Simulation results for the proposed SDM designed in $0.18{\mu}m$ CMOS technology with power supply voltage 1.8V, signal bandwidth 20KHz and sampling frequency 2.8224MHz shows SNR(Signal to Noise Ratio) of 87dB, the power consumption of $145{\mu}W$.

• Journal of Environmental Science International
• /
• v.25 no.11
• /
• pp.1485-1491
• /
• 2016

PSf/D2EHPA/CNT beads were prepared by immobilizing di-(2-ethylhexyl)-phosphoric acid (D2EHPA) and carbon nanotubes (CNT) on polysulfone (PSf) and used to remove Cu(II) from aqueous solutions. Optimum pH was in the range of 4 to 6. The removal kinetic of Cu(II) by the prepared PSf/D2EHPA/CNT beads was mainly governed by internal diffusion, and the diffusion coefficient of Cu(II) by PSf/D2EHPA/CNT beads was found to be $2.19{\times}10^{-4}{\sim}2.64{\times}10^{-4}cm^2/s$. The Langmuir isotherm model predicted the experimented data well. The maximum removal capacity of Cu(II) obtained from this isotherm was 7.32 mg/g. Calculated thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ showed that the adsorption of Cu(II) ions onto PSf/D2EHPA/CNT beads was feasible, spontaneous and endothermic at 293-323 K.

• The KIPS Transactions:PartB
• /
• v.12B no.1 s.97
• /
• pp.9-16
• /
• 2005

This paper focuses on the study of the face authentication system and the robustness of fact authentication methods under illumination changes. Four different face authentication methods are tried. These methods are as fellows; PCA(Principal Component Analysis), GMM(Gaussian Mixture Modeis), 1D HMM(1 Dimensional Hidden Markov Models), Pseudo 2D HMM(Pseudo 2 Dimensional Hidden Markov Models). Experiment results involving an artificial illumination change to fate images are compared with each other. Face feature vector extraction based on the 2D DCT(2 Dimensional Discrete Cosine Transform) if used. Experiments to evaluate the above four different fate authentication methods are carried out on the ORL(Olivetti Research Laboratory) face database. Experiment results show the EER(Equal Error Rate) performance degrade in ail occasions for the varying ${\delta}$. For the non illumination changes, Pseudo 2D HMM is $2.54{\%}$,1D HMM is $3.18{\%}$, PCA is $11.7{\%}$, GMM is $13.38{\%}$. The 1D HMM have the bettor performance than PCA where there is no illumination changes. But the 1D HMM have worse performance than PCA where there is large illumination changes(${\delta}{\geq}40$). For the Pseudo 2D HMM, The best EER performance is observed regardless of the illumination changes.

• Journal of Acupuncture Research
• /
• v.31 no.1
• /
• pp.149-158
• /
• 2014

Objectives : The aim of this study is to investigate the influence of anxiety and depression on motor recovery of acute Bell's palsy to estimate how much psychological factors affect the clinical prognosis. Methods : A total of 20 inpatients with acute unilateral Bell's palsy within 1 week of onset participated in this study. The severity of participants' facial palsy was measured by Yanagihara(Y-system) score, FDI and House-Brackmann scale at the time of 1 week and 3 weeks from the onset. The motor recovery of acute Bell's palsy is defined as ${\Delta}Y$-system during 2 weeks. Beck anxiety scale(BAI) and the center for epidermiologic studies depression scale(CES-D) were adopted to assess anxiety and depression, respectively. Correlation analysis and linear regression analysis were conducted between ${\Delta}Y$-system and prognostic factors including anxiety and depression. Results : Significant associations were found between ${\Delta}Y$-system and depression(CES-D) but no significant associations were found between ${\Delta}Y$-system and other prognostic factors, hypertension, diabetes, postauricular pain, disgeusia, age, degree of initial palsy and anxiety(BAI). And a regression equation with 0.295 for coefficient of determination was obtained. Through this analysis, the ${\Delta}Y$-system can be predicted using regression equation which cover 29.5 % of depression index(CES-D). Conclusion : Depression is a significant clinical prognostic factor on motor recovery of acute Bell's palsy. So, Bell's palsy treatment should be combined with psychological care and support.