• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.36-41
• /
• 2005

The smart space is composed of the wire and/or wireless network, multi-sensor-based environment, and many various controllers. For the smart space, this paper presents a new design method of multirate digital decentralized controller using the digital redesign technique. In specific, the proposed method is based on the delta-operator and the multirate sampling and takes the form of the LMIs. To shows the feasibility of the suggested method, the computer simulations for HVAC system are provided.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.91-92
• /
• 2006

For the CT specimen of 25.4mm thickness SS400 steel, the fracture toughness and the magnitude of constraint effect, $A_2$ on the non-linear elastoplastic fracture behaviors were experimentally estimated by crack tip opening displacement. In order to estimate constraint effect, displacement measurement position near crack front should be the existed within plastic region. But it is found that the displacement measurement positions by the ${\delta}_5$ method are in elastic region at crack growth initiation. Hence the estimate of constraint effect, $A_2$ by the ${\delta}_5$ method was not reliable.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1519-1525
• /
• 2014

This paper presents the shape design for reducing cogging torque and characteristic analysis in Brushless DC (BLDC) motor. In this BLDC motor, ${\Delta}$(delta)-winding is applied, and in order to obtain the $60^{\circ}$ trapezoidal phase back-EMF waveform, permanent magnet shape design is carried out. And then, a method on specifying design parameters to effectively reduce cogging torque is developed. back-EMF, input voltage and input current which are analyzed by the Finite Element Method (FEM) are validated by experimental results. Also, efficiency calculations based on analysis and experimental results are performed and analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2017-2020
• /
• 2011

Flicker, which is also known as voltage fluctuation, is an electromagnetic phenomenon generated by large scale nonlinear loads, such as arc furnaces and welding machines. Since a severe and continuous flicker can cause to some damages to electrically sensitive loads as well as human's visual irritations, it needs to be appropriately managed by being accurately measured, quantified and assessed. In Korea, an equivalent 10-Hz flicker index, shortly ${\Delta}V10$, is used to determine the permission limit of flicker. This paper presents an efficient calculation of the flicker index by using a half-cycle sliding window and a recursive method, showing a concrete calculating procedure of ${\Delta}V10$ from the viewpoint of signal processing.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2183-2187
• /
• 2005

In this paper we propose a new fault detection and isolation (FDI) method for those faults of parameter change type. First, we design a residual generator based on the ${\delta}$-operator model of the plant by using the stable pseudo inverse system. Second, the parameter change is estimated by using the property of the block Hankel operator. Third, reliability with respect to stability is quantified. Fourth, the limitations for the meaningful diagnosis in our method are given. The numerical examples demonstrate the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.463-468
• /
• 1992

In this paper, discrete-time H$_{\infty}$ controller design in .delta.- domaion using Normalized Coprime Factor plant description is proposed and the loop-shaping method developed by Mcfalane[2], which is known to be very simple and systematic method, is adopted here in H$_{\infty}$ controller design. In particular, we show that .delta.- H$_{\infty}$ controller proposed here is a unified form for the continuous and discrete-time cases.es.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.981-987
• /
• 1998

$La_{0.5}Sr_{0.5}MnO_{3-\delta}$ as air electrode for soild oxide fuel cell was synthesized by a citrate process and its cathodic polarization was determinated by the current interruption method on the Gd-doped ceria as electrolyte. The addition of citric acid increased the exothermic heat for the formation of $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ perovskite oxide. The degree of the initial particle agglomeration was affected by the exothermic heat. Also the increase of cal-cination temperature enlarged the particle size and the higher sintering temperature accelerated the den-sification of $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ layer after its being painted on $Ce_{0.8}Gd_{0.2}O_{1.9}$ electrolyte. In this study $La_{0.5}Sr_{0.5}MnO_{3-\delta}$ synthesized by citrate process of which the molar ratio of citric acid to metal nitrate was 2 calcined at $650^{\circ}C$ for 2hr and sintered at 1100 at $1200^{\circ}C$ for 4 hrs after slurry coating on Ce0.8Gd0.2O1.9 electrlyte showed the lowest cathodic polarization.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.3
• /
• pp.3539-3542
• /
• 1974

Maximum density and optimum moisture content of a soil may be one of the very important properties to be specified in the design of earth structures and their works. However, the determination of these soil properties may not be done without the necessary equipment and time-consuming field tests. This study was conducted to develop an easier method by determing the relations between the natural moisture content and optimum moisture content and between maximum density and optimum moisture content so determined. These velations are remarkably defferent according to the areas where the samples were taken, and thus analysis of the experimental results are shown by regions as follows: Eastern Districs:{{{{Tdmax= { 1} over {0.0090Wopt+0.417 } ( delta = +- 0.042, gamma =0.92) Wopt=0.251WN+8.5( delta = +- 2.41%, gamma =0.87) }}}} Southern Districts: {{{{Tdmax= { 1} over {0.0088Wopt+0.412 } (delta = +- 0.083, gamma =0.89) Wopt=0.332WN+8.42(delta = +- 3.41%, gamma =0.84)}}}}Central Districtsl1): {{{{Tdmax= { 1} over {0.0112Wopt+0.383} ( delta = +- 0.052, gamma =0.97) Wopt=0.758WN+2.606( delta = +- 4.72%, gamma =0.79)}}}}($\delta$:Standard Deviation, ${\gamma}$:Correlation Coefficient)

• The Korean Journal of Applied Statistics
• /
• v.4 no.1
• /
• pp.1-11
• /
• 1991

It is of great interest to consider the homogeniety of covariance matrices in MANOVA of discriminant analysis. If we lock at the problem of testing hypothesis, H : $\Sigma_1 = \Sigma_2$ from an invariance point of view where $\Sigma_i$ are the covariance matrix of two independent p-variate distribution, the testing problem is invariant under the group of nonsingular transformations and the hypothesis becomes H : $\delta_1 = \delta_2 = \cdots = \delta_p = 1$ where $\delta = (\delta_1, \delta_2, \cdots, \delta_p)$ is a vector of latent roots of $\Sigma$. Bias-corrected estimators of eigenvalues and sampling distribution of the test statistics proposed are obtained. Pooled-bootstrap method also considered for Bartlett's modified likelihood ratio statistics.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.5
• /
• pp.1693-1710
• /
• 2013

In this paper, we consider the biharmonic elliptic systems of the form $$\{{\Delta}^2u=F_u(u,v)+{\lambda}{\mid}u{\mid}^{q-2}u,\;x{\in}{\Omega},\\{\Delta}^2v=F_v(u,v)+{\delta}{\mid}v{\mid}^{q-2}v,\;x{\in}{\Omega},\\u=\frac{{\partial}u}{{\partial}n}=0,\; v=\frac{{\partial}v}{{\partial}n}=0,\;x{\in}{\partial}{\Omega},$$, where ${\Omega}{\subset}\mathbb{R}^N$ is a bounded domain with smooth boundary ${\partial}{\Omega}$, ${\Delta}^2$ is the biharmonic operator, $N{\geq}5$, $2{\leq}q$ < $2^*$, $2^*=\frac{2N}{N-4}$ denotes the critical Sobolev exponent, $F{\in}C^1(\mathbb{R}^2,\mathbb{R}^+)$ is homogeneous function of degree $2^*$. By using the variational methods and the Ljusternik-Schnirelmann theory, we obtain multiplicity result of nontrivial solutions under certain hypotheses on ${\lambda}$ and ${\delta}$.