• Journal of the Korean GEO-environmental Society
• /
• v.15 no.4
• /
• pp.29-36
• /
• 2014

The purpose of this study investigates the delivery characteristics according to the load of pollutants by calculating the delivery rate of targeted areas on pollutants in Sapkyo reservoir. The main rivers of Sapkyo reservoir are Namwoncheon, Dogocheon, Sapkyocheon, Muhancheon and Gokgyocheon. The delivery rate and their characteristics of five major rivers during rainfall season are investigated. As th result, biochemical oxygen demand (BOD), total nitrogen (T-N) and total phosphorous (T-P) of total delivery rate are calculated by 0.40, 0.34 and 0.08, respectively. The delivery rate of T-P compares to other water quality is investigated relatively low. Looked at the overall characteristics of the watershed, the delivery rate of T-N and T-P is little change in the rate of the year, too. The delivery rate of T-N is calculated from 0.2 to 0.3 in the dry season, and from 0.31 to 0.39 in a flood, respectively. The delivery rate of T-P is calculated to more than 0.3 in the dry season, and 0.11 in a flood. It is similar values which the average annual delivery rate of T-P is 0.08. Therefore, the measured delivery rate of Sapkyo reservoir can be applicable such as a delivery rate of similar features of the terrain and land use.

• Journal of the Korean Dietetic Association
• /
• v.14 no.1
• /
• pp.77-86
• /
• 2008

In Korea, delivery of preterm has increased gradually, preterm delivery rate was 6.4% in 1995 and 9.8% in 2002. The purpose of this study is to provide guidelines for preventing preterm delivery in aspect of health factors and food habits. The health factors and dietary habits were compared between preterm delivery group and full-term delivery group on to recognize risk factor of delivering premature. The results obtained are summarized as follows. The full-term delivery group showed a high rate of professionals and the preterm delivery group showed a high rate of the service industry, showing differences in kinds of occupation(p<0.05). Heights were higher in full-term delivery group(p<0.05). Among the nutrition supplements, iron supplement consumption was the most, period of the intake of iron was significantly longer for the full-term delivery group than for the preterm delivery group(p<0.05). Also, prevalence of coffee was higher in preterm delivery group(p<0.001). The activity level was higher in full-term delivery group(p<0.005).

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.77-86
• /
• 2000

In order to observe the pattern forming of copper plate and chemical corrosion reaction, a study on the effect of the process parameters on the formation of micro-pattern by a photochemical etching of copper plate was carried out. The results are as follows : 1) Etching rate increases as the concentration of etchant increases under the regular condition of the temperature by the increasing of diffusion rate to surface. 2) Etching rate increases as the temperature of etchant increases by the fast acting of the material delivery of diffusion to surface under the regular condition of concentration. 3) It was found that etching speed increases as the material delivery of convection rising increased when the aeration speed of etchant increases. This result was from the fact acted by the material delivery of convection rising rather than material delivery of diffusion to the surface.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.704-705
• /
• 2015

Recent research has been ongoing for modular buildings in the country, and interest increases. However, in accordance with legal restrictions in the country with regard to Project Delivery system of Modular Building, the activation of modular buildings industry is obstructed. In Korea, in accordance with national contract law, the construction contract is apply to the project delivery system of modular buildings, and in accordance with Framework Act on the Construction Industry, The project delivery system of modular buildings has to be a separate order. The definition of separate order in contract as defined in the law is that the electric work and Communication work and digestion facility work has to be separate each contract in order to be ensured professionalism. In accordance with law, the project delivery system of modular buildings is that the contract for construction is concluded with the Owner and the Construction Contractor and the contract for goods is concluded with the construction Contractor and modular manufacturer. Due to these project delivery system, the domestic factory production rate when making a modular unit is significantly reduced compared to the rate of factory production abroad and the domestic factory production rate is estimated to 10-20%. Due to the factory production rate is also low, despite what can be done at the factory the workload in construction field increases. According to the workload in field increases, the effect of the schedule reduction can be reduced. It resolved to form a consortium with a modular manufacturer and construction companies or the contract is concluded with Owner, modular manufacturer and construction companies in each. In this paper, we propose a specific project delivery system for modular building to solve the problem of the low factory production rate and the problem of schedule reduction. Through this paper, due to the variety of project delivery system on modular buildings is expected to contribute to the activation of modular buildings.

• Women's Health Nursing
• /
• v.18 no.3
• /
• pp.200-208
• /
• 2012

Purpose: This study was aimed to examine the gap between predicted cesarean section rate and real cesarean section rate and it's determining factors of 44 tertiary hospitals. Method: This study is a cross-sectional analysis using the data of 25,623 deliveries in 2009 drawn from homepage of Health Insurance Review and Assessment Service. Data were analyzed with t-test, F-test, Scheff$\acute{e}$ test, and logistic regression. Result: There were statistically significant differences in the gap of cesarean section rate (more gap indicates higher quality of delivery) by grade of nurse staffing and delivery cases. Hospitals with nurse staffing grade 1 to 2 had more possibility to be classified into higher grade in quality of delivery (OR 5.67, 95% CI 1.07-30.08). Also hospitals with over 500 delivery cases had more possibility be classified into higher grade in quality of delivery (OR 4.92, 95% CI 1.14-21.23, respectively). Conclusion: The finding suggests that grade of nurse staffing may influence the real cesarean section rate because nurses do a vital role to prevent unnecessary cesarean section. Further study is required to provide evidence that nurse staffing influence on patient outcome and cost-effectiveness in order to obtain adequate number of nursing staffs.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.75-80
• /
• 1999

The formation of $n-TiO_2$ powder by oxidation of Ti-ethoxied vapor in a flat flame burner reactor maintained under 20 torr has been studied. The produced powder were characterized in terms of crystal structure, chemical composition by XRD and TEM. The results showed that the powder consisted of loose agglomerated anatase and rutile particles and their size were about 10 nm and 20 nm, respectively. In the course of synthesis, changes of the flame color were happened to each condition during heating up the bubbler. The flame color transition phenomena reveled that a critical precursor delivery rate was needed for the powder formation (obtainable powder yield). The critical precursor delivery rate was estimated by a simple function of the bubbler temperature and the carrier gas flow rate. The critical precursor delivery rate was reviewed as an important variable of the nanopowder synthesis.

• Clinical and Experimental Reproductive Medicine
• /
• v.51 no.1
• /
• pp.63-68
• /
• 2024

Objective: This study was conducted to investigate the impact of previous delivery mode on pregnancy outcomes in patients with secondary infertility after frozen-thawed embryo transfer. Methods: This prospective observational study included 140 patients experiencing secondary infertility. Of these, 70 patients had a previous cesarean delivery (CD), while the remaining 70 patients had a previous normal vaginal delivery (NVD). The primary outcome was the implantation rate. The secondary outcomes included rates of clinical pregnancy, chemical pregnancy, miscarriage, and ectopic pregnancy. Results: The comparison of all fertility outcomes between the two groups revealed no statistically significant differences. The implantation rate was 40.4% in the CD group and 41.7% in the NVD group (p=0.842). The clinical pregnancy rate was 50% in the CD group and 49.3% in the NVD group (p=0.932), while the chemical pregnancy rate was 14.6% in the CD group and 19% in the NVD group (p=0.591). The miscarriage rates in the CD and NVD groups were 20% and 17.6%, respectively (p=0.803). One case of tubal ectopic pregnancy occurred in the NVD group (1.4%). Conclusion: The mode of prior delivery did not significantly impact pregnancy outcomes following frozen-thawed embryo transfer.

• Journal of Industrial Convergence
• /
• v.13 no.1
• /
• pp.25-40
• /
• 2015

The aim of this study is to a study on the effects of fertile women on the low fertility in Korea. It is designed to research a model and established hypothesis with emphasis on major variables based on theoretical discussions. However, the result of the study is as follows. Firstly, this brought in delivery avoid phenomenon thus resulting in lower delivery phenomenon. The government should propose reasonable solutions to persuade female personal value and important elements of delivery rate at the same time. Secondly, Patriarchal stereotypes weighting household labor to female traditionally pressures working female with double burden as dual stance of work and family worsen the delivery will. Such atmosphere within a family generates female with an ability to get pregnancy to avoid marriage and delivery. Lastly, the research has pointed out the delivery support policy as most ineffective policy among government policies. To solve this problem, the government policy to recover delivery rate must be reviewed continuously and to be exercised immediately.

• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.656-666
• /
• 2014

In delay tolerant networks (DTNs), delay is inevitable; thus, making better use of buffer space to maximize the packet delivery rate is more important than delay reduction. In DTNs, epidemic routing is a well-known routing protocol. However, epidemic routing is very sensitive to buffer size. Once the buffer size in nodes is insufficient, the performance of epidemic routing will be drastically reduced. In this paper, we propose a buffer scheme to optimize the performance of epidemic routing on the basis of the Lagrangian and dual problem models. By using the proposed optimal buffer scheme, the packet delivery rate in epidemic routing is considerably improved. Our simulation results show that epidemic routing with the proposed optimal buffer scheme outperforms the original epidemic routing in terms of packet delivery rate and average end-to-end delay. It is worth noting that the improved epidemic routing needs much less buffer size compared to that of the original epidemic routing for ensuring the same packet delivery rate. In particular, even though the buffer size is very small (e.g., 50), the packet delivery rate in epidemic routing with the proposed optimal buffer scheme is still 95.8%, which can satisfy general communication demand.

• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.151-161
• /
• 2010

Recently, as the era of ubiquitous has arrived, an infrastructure for the short-distance wireless communication has been extended socially, and thus a variety of services are being proposed. The Multimedia Contents Delivery System using the ZigBee, in particular, has an important stance in enlargement of a variety of services in the aspect of individual-oriented service support though Wireless Personal Area Network (WPAN). Nonetheless, the ZigBee, or the IEEE 802.15.4 Standard, has many restrictions on the Multimedia Contents Delivery System due to the low data transport rate. In order to improve the ZigBee which presents a limit on the transport rate at the IEEE 802.15.4 Standard, this thesis has designed the burst mode which is a method of transmitting a certain amount of data in block units at a high speed without any stoppage until the completion of the transmission. Also, to provide a Multimedia Contents Delivery Service with an application of the normal data transmission mode, it improved the transmission performance of the ZigBee. In addition, for the Multimedia Contents Delivery Service under the ubiquitous environment, it designed and implemented a broadcasting Multimedia Contents Delivery System based on the ZigBee to conduct a comparative analysis on the data transmission performance according to the transmission method.