• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.2
• /
• pp.429-436
• /
• 2018

Electronic documents are efficient to be created and managed, but they are liable to lose their originality because copies are created during distribution and delivery. For this reason, various security technologies for electronic documents have been applied. However, most security technologies currently used are for document management such as file access privilege control, file version and history management, and therefore can not be used in environments where authenticity is absolutely required, such as confidential documents. In this paper, we propose a method to detect document forgery and tampering through analysis of file system without installing an agent inside the instance operating system in cloud computing environment. BubbleDoc monitors the minimum amount of virtual volume storage in an instance, so it can efficiently detect forgery and tampering of documents. Experimental results show that the proposed technique has 0.16% disk read operation overhead when it is set to 1,000ms cycle for monitoring for document falsification and modulation detection.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.295-300
• /
• 1994

It was the purpose of present study to develop a new thermoseed for heating deep-seated tumors and assessment of the effect of magnetic control on thermoseeds. Aqueous suspension of iron micro spheres (Ferropolysaccharide) was injected directly into the VX-2 hepatoma and heated with 1.2 MHz inductive radiofrequency unit. Aqueous thermoseed suspension was delivered to the tumor by simple percutaneous injection. The limitation of the thermoseed heating method is the positional change of thermoseed particles in the tumor after implantation. The thermoseed particles could enter the systemic blood circulation and cause a severe embolization of a critical organ. To minimize this limitation, we have used the magnetic control after loading the thermoseed in the tumor, W hen ferropolysaccharides were exposed to a strong magnetic field, they magnetized and subsequently exerted a magnetic force on each other, forming larger aggregates of particles. The size of aggregated Particles were too big to enter the systemic blood circulation. Thus, unlike other thermoseed method, we hold the thermoseed particles stationary in the tumor. The temperature of the injected site and immediate vicinity elevated by $4-5^{\circ}C$. The temperature of the surrounding normal hepatic tissue elevated by $1-2^{circ}C$ only. The heating effect within the tumor was variable depending on the density of ferromagnetic aqueous suspension. Our results suggest that inductive heating of tumor injected with ferropolysaccharide solution offers the possibility of effective heat delivery to the defined tumor volume, which is difficult to heat with other heating devices.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.685-694
• /
• 2003

Recently as the mobile computing is burgeoning, multimedia services have become very popular. Multimedia services require large data volume and have to send the same data to several users. In order to provide efficient multimedia services that have those characteristic to mobile users, efficient multicast technique to support host mobility is required. Previous research that support multicast services in mobile computing based on Mobile IP have the non-optimization problem of data delivery path, overhead by frequent reconstruction of the multicast tree, and service disruption problem. In this paper, we propose the mobility pattern based multicast technique using variable service range according to the mobility of mobile hosts and resource reservation to solve this problems. The experimental results show that our proposed mechanism has improved performance than previous research.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.81-85
• /
• 2013

Wafer stacking technology becomes more important for the next generation IC technology. It requires new process development such as TSV, wafer bonding, and wafer thinning and also needs to resolve wafer warpage, power delivery, and thermo-mechanical reliability for high volume manufacturing. In this study, Cu CMP which is the key process for wafer bonding has been studied using Cu CMP and oxide CMP processes. Wafer samples were fabricated on 8" Si wafer using a damascene process. Cu dishing after Cu CMP and oxide CMP was $180{\AA}$ in average and the total height from wafer surface to bump surface was approximately $2000{\AA}$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.5 no.1
• /
• pp.33-38
• /
• 1978

It has been studied that aminoacetonitrile was associated with the inhibition of collagen fiber, argyrophilic fiber and oxytalan fiber synthesis. This experiment was performed, by the basic knowledge of above mentioned study, to study on the biological effect of aminoacetonitrile to the developing periodontal ligament in Sprague Dawley rat. twenty two of female rats weighing about 200gm were gestated. In 7 days after gestation, the experimental rats were injected aminoacetonitrile 7 times intraperitoneally. After parturition, delivered fJtuses were divided into 4 groups and each group was sacrificed to 1 day, 7 days, 14 days, and 21 days after delivery, schematically. All the fetuses were observed on their periodontal ligament by histological and histo chemical methods. To study on the components of periodontal ligament fiber in these experimental study van Gieson, Masson's trichrom, argyrophilic fiber, oxytalan fiber, methyl green pyronin and periodic acid-Shiff staining were performed. Results were as follows; 1) Retardation of functional orientation in periodontal ligament collagen fiber was observed in 1 day fetuses hut this appearance was diminished gradually and recovered in normal condition in 7 days fetuses. 2) Distribution of argyrophilic fiber in 1 day fetuses was oriented delicately and loosely but volume of this fiber was gradually thickened and distributed densely. 3) Oxytalan fiber was oriented dendritic ally and contradictorily in 14 days fetuses but their orientation was changed into oblique form in middle portion of roof and their numbers were increased gradually. 4) Pyronin-philic stain of fibroblast was gradually deepened in 7 days fetuses and this finding also suggested to the depreciation of collagen synthesis in this specimen. 5) PAS positive line was observed continuousely at the portion of cervical to the middle root surface.

• Biomolecules & Therapeutics
• /
• v.25 no.4
• /
• pp.411-416
• /
• 2017

Paclitaxel (PTX) is a effectively chemotherapeutic agent which is extensively able to treat the non-small cell lung, pancreatic, breast and other cancers. But it is a practically insoluble drug with water solubility less than $1{\mu}g/mL$, which restricts its therapeutic application. To overcome the problem, hyaluronic acid-complexed paclitaxel nanoemulsions (HPNs) were prepared by ionic complexation of paclitaxel (PTX) nanoemulsions and hyaluronic acid (HA) to specifically target non-small cell lung cancer. HPNs were composed of ${\small{DL}}-{\alpha}$-tocopheryl acetate, soybean oil, polysorbate 80, ferric chloride, and HA and fabricated by high-pressure homogenization. The HPNs were $85.2{\pm}7.55nm$ in diameter and had a zeta potential of $-35.7{\pm}0.25mV$. The encapsulation efficiency was almost 100%, and the PTX content was 3.0 mg/mL. We assessed the in vivo antitumor efficacy of the HPNs by measuring changes in tumor volume and body weight in nude mice transplanted with CD44-overexpressing NCI-H460 xenografts and treated with a bolus dose of saline, $Taxol^{(R)}$, PTX nanoemulsions (PNs), or HPNs at a dose of 25 mg/kg. Suppression of cancer cell growth was higher in the PN- and HPN-treated groups than in the $Taxol^{(R)}$ group. In particular, HPN treatment dramatically inhibited tumor growth, likely because of the specific tumor-targeting affinity of HA for CD44-overexpressed cancer cells. The loss of body weight and organ weight did not vary significantly between the groups. It is suggest that HPNs should be used to effective nanocarrier system for targeting delivery of non-small cell lung cancer overexpressing CD44 and high solubilization of poorly soluble drug.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.6
• /
• pp.373-387
• /
• 2017

Objectives: The purpose of this study was to introduce our three experiments on bone morphogenetic protein (BMP) and its carriers performed using the critical sized segmental defect (CSD) model in rat fibula and to investigate development of animal models and carriers for more effective bone regeneration. Materials and Methods: For the experiments, 14, 16, and 24 rats with CSDs on both fibulae were used in Experiments 1, 2, and 3, respectively. BMP-2 with absorbable collagen sponge (ACS) (Experiments 1 and 2), autoclaved autogenous bone (AAB) and fibrin glue (FG) (Experiment 3), and xenogenic bone (Experiment 2) were used in the experimental groups. Radiographic and histomorphological evaluations were performed during the follow-up period of each experiment. Results: Significant new bone formation was commonly observed in all experimental groups using BMP-2 compared to control and xenograft (porcine bone) groups. Although there was some difference based on BMP carrier, regenerated bone volume was typically reduced by remodeling after initially forming excessive bone. Conclusion: BMP-2 demonstrates excellent ability for bone regeneration because of its osteoinductivity, but efficacy can be significantly different depending on its delivery system. ACS and FG showed relatively good bone regeneration capacity, satisfying the essential conditions of localization and release-control when used as BMP carriers. AAB could not provide release-control as a BMP carrier, but its space-maintenance role was remarkable. Carriers and scaffolds that can provide sufficient support to the BMP/carrier complex are necessary for large bone defects, and AAB is thought to be able to act as an effective scaffold. The CSD model of rat fibula is simple and useful for initial estimate of bone regeneration by agents including BMPs.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.2
• /
• pp.146-153
• /
• 2006

A passive microfluidic delivery system using hydrophobic valving and pneumatic control was devised for microfluidic handling on a chip. The microfluidic metering, cutting, transport, and merging of two liquids on the chip were correctly performed. The error range of the accuracy of microfluid metering was below 4% on a 20 nL scale, which showed that microfluid was easily manipulated with the desired volume on a chip. For a study of the feasibility of biochemical reactions on the chip, a single enzymatic reaction, such as ${\beta}-galactosidase$ reaction, was performed. The detection limit of the substrate, i.e. fluorescein $di-{\beta}-galactopyranoside$ (FDG) of the ${\beta}-galactosidase$ (6.7 fM), was about 76 pM. Additionally, multiple biochemical reactions such as in vitro protein synthesis of enhanced green fluorescence protein (EGFP) were successfully demonstrated at the nanoliter scale, which suggests that our microfluidic chip can be applied not only to miniaturization of various biochemical reactions, but also to development of the microfluidic biochemical reaction system requiring a precise nano-scale control.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.15-22
• /
• 2011

An experimental variable rate nursery sprayer was developed to adjust application rates for canopy volume in real time. The sprayer consisted of two vertical booms integrated with ultrasonic sensors, and variable rate nozzles coupled with pulse width modulation (PMW) based solenoid valves. A custom-designed microcontroller instructed the sensors to detect canopy size and occurrence and then controlled nozzles to achieve variable application rates. A spray delivery system, which consisted of diaphragm pump, pressure regulator and 4-cycle gasoline engine, offered the spray discharge function. Spray delay time, time adjustment in spray trigger for the leading distance of the sensor, was measured with a high-speed camera, and it was from 50 to 140 ms earlier than the desired time (398 ms) at 3.2 km/h under indoor conditions. Consequently, the sprayer triggered 4.5 to 12.5 cm prior to detected targets. Duty cycles of the sprayer were from 20 to 34 ms for senor-to-canopy (STC) distance from 0.30 to 0.76 m. Outdoor test confirmed that the nozzles were triggered from 290 to 380 ms after detecting tree canopy at 3.2 km/h. The spray rate of the new sprayer was 58.4 to 85.2% of the constant application rate (935 L/ha). Spray coverage was collected at four areas of evergreen canopy by water sensitive papers (WSP), and ranged from 1.9 to 41.1% and 1.8 to 34.7% for variable and constant rate applications, respectively. One WSP area had significant (P < 0.05) difference in mean spray coverage between two application conditions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.157-165
• /
• 2005

The purpose of this research is to investigate the actual conditions of the manufacturer's design processes. Questionnaires were sent out, and 57 interviews were used as research methods including designers, programmers, and merchandisers working for a knit manufacturer in Seoul, followed by a frequency analysis using SPSS 12.0. The results are as follows: knitted fabric goods were the top choices in casual wear. Brand image depended on 'elegance', 'modernity', and 'romanticism', among other lifestyle pursuits. The distribution ratio of the 'basic' and the 'trendy' knit was at 3:7 or 7:3, while the ratio of 6:4 or 4:6 was more common. Knit structure was proven to be the most important factor in the changes in designs. Style and yam ranked second and third, respectively. In addition, details (embroidery and beading), color, pattern, and processing were among the other factors, in order of importance. Based on the difficulty in designing and manufacturing knitted fabric goods, 'manufacturing cost:' 'lack of a manufacturing facility for small production,' and 'limited delivery time' were among the reasons cited in the questionnaire. These results appeared to have been caused by small-scale manufacturers or small-scale manufacturing facilities that made small volume production difficult. The results of the interviews on knitted fabrics that were most frequently used and with the highest sales volumes showed that plain, lace, links & links, miss, and 1:1 rib were ranked accordingly for S/S use, while jacquard, cable, 1:1 rib, links & links, milano, plain, and half cardigan were ranked accordingly for F/W use.