• Title/Summary/Keyword: Delay-time

Search Result 6,755, Processing Time 0.033 seconds

Effect of Lipid Constituents on the Amylograph Characteristics of Barley Flour (지방질성분(脂肪質成分)이 보리가루의 Amylograph특성(特性)에 미치는 영향)

  • Choi, In-Sook;Lee, Su-Rae
    • Korean Journal of Food Science and Technology
    • /
    • v.16 no.1
    • /
    • pp.99-107
    • /
    • 1984
  • Naked barley flour(Baekdong cultivar) was examined with respect to its pasting properties by means of Brabender amylograph after adding barley lipids, fatty acids, vegetable oils and emulsifiers at 1% level. Amylogram of barley flour showed a similar gelatinization temperature but higher paste viscosities at all reference points as compared with wheat flour. Barley flour showed lower amylograph curves by defatting with n-hexane, namely reductions in initial gelatinization point, maximum viscosity and setback value. But re-addition of n-hexane extract to the defatted flour essentially reproduced the curve obtained in the undefatted flour. Addition of polar and nonpolar lipids exhibited different effects on the pasting properties of barley flour. Polar lipids generally increased maximum viscosity a little while non-polar lipids increased the maximum viscosity substantially. Addition of increasing amounts of nonpolar lipids was found to progressively increase the maximum viscosity. Addition of fatty acids increaed th maximum viscosity and delayed the peak time. The maximum viscosity of defatted barley flour impregnated with unsaturated fatty acids was higher than that of defatted barley flour impregnated with saturated fatty acids Increasing amounts of linoleic acid were fount to progressively increase the maximum viscosity and to delay the peak time of defatted barley flour. Addition of six vegetable oils lowered the gelatinization temperature and rasied the maximum viscosity and temperature at maximum viscosity. Addition of increasing amount of peanut oil was found to decrease the maximum viscosity. The effect of emulsifiers was greater in undefatted flour than in defatted flour. The maximum viscosity of defatted flour was slightly affected by Methocel 50, Methocel 1500 and Emulthin, and substantially increased by Methocel 4000, sodium polyacrylate and calcium stearyl lactylate.

  • PDF

Properties of Hot Weather Nuclear Power Plant Concrete with Water Cooling Method and Retarding used (배합수 냉각방법 및 지연제 사용에 따른 서중 원전콘크리트의 특성)

  • Lee, Seung-Han;Jung, Yong-Wook;Jang, Seok-Soo;Yeo, In-Dong;Choi, Jong-Oh
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.9
    • /
    • pp.4602-4609
    • /
    • 2013
  • In summer and winter, the difference between the temperature during the day and that during the night is high, which leads to various problems during concrete placement, such as cracks and defects in the concrete as well as low durability and strength. Although nuclear power plant concrete is widely used for placement in all seasons, particular attention must be paid to its quality during the summer. Therefore, we evaluated the effects of a cooling method for mixing water, which is a commonly used hot weather precooling method, and the use of a retarder, on the characteristics of Nuclear Power Plant concrete. In the cooling method for mixing water, cold water at 5 was used, with 50% of the water content consisting of ice flakes. The effects of using a retarder were evaluated by reviewing the characteristics of the cement at the unset stage and after hardening. To evaluate the characteristics of the unset cement, we measured the slump, air volumes, setting times, and pressure strengths after hardening. Furthermore, we measured the heat of hydration at different temperatures; the loss of heat was minimized using insulation. Both the slump time and the complete ageing time of the air volume were found to be 120 min at $20^{\circ}C$ and 40 min at $40^{\circ}C$. In the case when the cooling method for mixing water was used and in the case when a retarder was used, the initial and final sets by penetration resistance were delayed, and the delay decreased with increasing air temperature. For the heat of hydration, the cooling method for mixing water not only lowered the maximum temperature but also delayed its attainment. However, the use of a retarder had no effect on the maximum temperature. Moreover, in the early ages (e.g., 3 and 7 days), the pressure strength of the concrete was lower than that of plain cement. However, the strength of 28-day concrete met the standard construction specifications.

A Study on the Application of Bushings Fire Prevent Structure to Prevent Fire Spread of Transformer (변압기의 화재확산 방지를 위한 부싱 방화구조체 적용에 관한 연구)

  • Kim, Do-Hyun;Cho, Nam-Wook;Yoon, Choung-Ho;Park, Pil-Yong;Park, Keun-Sung
    • Fire Science and Engineering
    • /
    • v.31 no.5
    • /
    • pp.53-62
    • /
    • 2017
  • Electric power which is the energy source of economy and industries requires long distance transportation due to regional difference between its production and consumption, and it is supplied through the multi-loop transmission and distribution system. Prior to its actual use, electric power flows through several transformations by voltage transformers in substations depending on the characteristics of each usage, and a transformer has the structure consisting of the main body, winding wire, insulating oil and bushings. A transformer fire that breaks out in substations entails the primary damage that interrupts the power supply to houses and commercial facilities and causes various safety accidents as well as the secondary economic losses. It is considered that causes of such fire include the leak of insulating oil resulting from the destruction of bottom part of bushings, and the chain reaction of fire due to insulating oil that reaches its ignition point within 1 second. The smoke detector and automatic fire extinguishing system are established in order to minimize fire damage, but a difficulty in securing golden time for extinguishing fire due to delay in the operation of detector and release of gas from the extinguishing system has become a problem. Accordingly, this study was carried out according to needs of active mechanism to prevent the spread of fire and block the leak of insulating oil, in accordance with the importance of securing golden time in extinguishing a fire in its early stage. A bushings fireproof structure was developed by applying the high temperature shape retention materials, which are expanded by flame, and mechanical flame cutoff devices. The bushings fireproof structure was installed on the transformer model produced by applying the actual standards of bushings and flange, and the full scale fire test was carried out. It was confirmed that the bushings fireproof structure operated at accurate position and height within 3 seconds from the flame initiation. It is considered that it could block the spread of flame effectively in the event of actual transformer fire.

Impact and significance of Nongak(農樂) education in Agricultural High School since 1950 on the modern Korean Nongak History (1950년대 중반 이후 농림/농업고등학교에서의 농악(農樂) 교육이 한국농악 현대사에 끼친 영향과 의의)

  • Yang, Ok-Kyung
    • (The) Research of the performance art and culture
    • /
    • no.40
    • /
    • pp.111-136
    • /
    • 2020
  • Agricultural high schools are undergoing a change their name from the mid-1950s to the 2000s. Although it varies slightly depending on the case, it has been changed from 'rural forests' to 'agricultural farms' or 'agricultural industries' and 'life sciences high schools' in turn. In several aricultural high schools had managed Nongak Department(class), it's guarantees the continuity of Korea's traditional folk art. Examples include entertainment and farming in Honam region of Jeonju aricultural high School in North Jeolla Province, Geumsan aricultural high School in South Chungcheong Province, Gimcheon aricultural high School in North Gyeongsang Province. Therefore, the interpretation and significance of studies should follow. This method of Nongak education in modern school institutions is a new phenomenon in the history of Nongak after modern time, the emergence of a whole new pattern of professional entertainment Nongak after paving and Female-Nongak, as well as local traditional folk music. Education here was conducted in such a way that the best performers of the time were invited as guidance teachers among traditional folk artists. Thus, various local and professional music and entertainment were able to be promoted Apart from the social relations of delay, social progress, and economy, the education of farming and music, which consists of teachers and students in public schools, has provided an environment where unlimited freedom is allowed for art forms. In other words, the conditions for a new performance style experiment and creative fusion were met, and the foundation for the development of professional musical performers who had acquired individualized talents from previous generations was laid down in the context of the phenomenon of active stage music and theater performance of outstanding in the culture of Nongak. In other words, the Department of Agriculture and aricultural high school was a very free space compared to other communities' and economic community's agricultural music in social relationships bound by traditional cultural customs. This is why they have created a new style of performance through a new experiment and a different traditional performance repertoire, and their activities have led to a more stylistic expansion from traditional farming. More importantly, the figures who came across Agricultural Nongak department became the main experts of traditional Korean folk music nowdays. Thus, Nongak Department, operated by the Agriculture and Forestry High School, was a space where would give a very important meaning in terms of Nongak history.

A multidisciplinary approach for the treatment of child abuse in Korea (병원 기반 학대아동보호팀의 20년간의 활동 경험)

  • Song, Bong Kyu;Kim, Do Kyun;Park, Hye Young;Hwang, Jun Won;Kwak, Young Ho
    • Clinical and Experimental Pediatrics
    • /
    • v.52 no.11
    • /
    • pp.1207-1215
    • /
    • 2009
  • Purpose:To review and determine the complications in 76 child abuse cases recorded by a multidisciplinary hospital-based child protection team between 1987 and 2007. Methods:We retrospectively reviewed the reports and medical records of child abuse cases maintained by a university hospital-based child protection team. We devised a questionnaire for standardized interviews with the victims' guardians to determine the current physical and mental status of the children; questionnaires were answered by social workers of the child protection team who interviewed the present fosterers of 24 (35.8%) children. Results:Of the 76 children, 6 were infants, 10 were 1-3 years old, were 3-10 years old, and 19 were over 10 years old. Seven children (9.2%) were neglected and 27 (35.5%) and 44 (57.9%) were sexually and physically abused, respectively. In more than half of the cases, the perpetrators were the father or mother of the children. Most children (41 cases, 53.9%) were abused at their homes. The mean follow-up duration from the time of abuse infliction was $54.3{\pm}49.2$ months, and the current mean age of the children was $8.3{\pm}6.4$ years. Moderate and severe developmental delay and physical disability were observed in 6 (25.0%) and 3 (12.5%) cases, respectively. In 13 children (54.2%), the Global Assessment of Functioning Scale (GAF) score was less than 60, which indicates mild mental disability. Conclusion:A hospital-based child protection team may witness the different proportion of abuse types and patterns by conducting a nation-wide survey of child abuse cases.

Clinical Results and Risk Factor Analysis of Surgical Treatment for Esophageal Perforation (식도천공의 수술적 치료의 임상결과와 위험인자 분석)

  • Cho, Sung-Woo;Hong, Ki-Woo;Kim, Shin;Lee, Hee-Sung;Kim, Hyoung-Soo;Lee, Jae-Woong;Choi, Goang-Min;Shin, Yoon-Cheol;Shin, Ho-Seung;Lee, Won-Yong
    • Journal of Chest Surgery
    • /
    • v.41 no.3
    • /
    • pp.347-353
    • /
    • 2008
  • Background: Esophageal perforation is an emergency that. requires early diagnosis and effective treatment. A delay in diagnosis and treatment. significantly increases morbidity and mortality. Material and Method: Thirty-seven patients with esophageal perforation were surgically treated at our institutions between January 1990 and December 2006. We retrospectively reviewed the results of surgical treatment for esophageal perforation to understand the risk factors affecting survival inpatients. Result: Patients ranged in age from 21 to 87 years, with an average age of $52.7{\pm}16.98$ years. Thirty-one of the patients were men and six were women. There were 23 patients (62%) with spontaneous perforations, 10 patients (27%) with a traumatic perforation, and 4 patients (11%) with an iatrogenic perforation. The site of esophageal perforation was the cervical esophagus in 5 patients, the thoracic esophagus in 31 patients, and the abdominal esophagus in one patient. Twenty-nine patients underwent primary closure of the perforation and five patients had T-tube drainage. Exclusion-diversion procedures were performed in two patients and an esophagectomy was performed in one patient. There were six cases of mortality (16.22%) and 25 cases of postoperative complications in 15 patients (40.5%). Patients that were treated later than 24 hours after detection of the perforation showed a statistically significant high morbidity and mortality rate (p<0.05). Conclusion: The most important risk factor of esophageal perforation was the time interval between detection of the perforation and the initiation of treatment. A prompt diagnosis and effective treatment are necessary to decrease morbidity and mortality.

Recognition and Request for Medical Direction by 119 Emergency Medical Technicians (119 구급대원들이 지각하는 의료지도의 필요성 인식과 요구도)

  • Park, Joo-Ho
    • The Korean Journal of Emergency Medical Services
    • /
    • v.15 no.3
    • /
    • pp.31-44
    • /
    • 2011
  • Purpose : The purpose of emergency medical services(EMS) is to save human lives and assure the completeness of the body in emergency situations. Those who have been qualified on medical practice to perform such treatment as there is the risk of human life and possibility of major physical and mental injuries that could result from the urgency of time and invasiveness inflicted upon the body. In the emergency medical activities, 119 emergency medical technicians mainly perform the task but they are not able to perform such task independently and they are mandatory to receive medical direction. The purpose of this study is to examine the recognition and request for medical direction by 119 emergency medical technicians in order to provide basic information on the development of medical direction program suitable to the characteristics of EMS as well as for the studies on EMS for the sake of efficient operation of pre-hospital EMS. Method : Questionnaire via e-mail was conducted during July 1-31, 2010 for 675 participants who are emergency medical technicians, nurses and other emergency crews in Gyeongbuk. The effective 171 responses were used for the final analysis. In regards to the emergency medical technicians' scope of responsibilities defined in Attached Form 14, Enforcement regulations of EMS, t-test analysis was conducted by using the means and standard deviation of the level of request for medical direction on the scope of responsibilities of Level 1 & Level 2 emergency medical technicians as the scale of medical direction request. The general characteristics, experience result, the reason for necessity, emergency medical technicians & medical director request level, medical direction method, the place of work of the medical director, feedback content and improvement plan request level were analyzed through frequency and percentage. The level of experience in medical direction and necessity were analyzed through ${\chi}^2$ test. Results : In regards to the medical direction experience per qualification, the experience was the highest with 53.3% for Level 1 emergency medical technicians and 80.3% responded that experience was helpful. As for the recognition on the necessity of medical direction, 71.3% responded as "necessary" and it turned out to be the highest of 76.9% in nurses. As for the reason for responding "necessary", the reason for reducing the risk and side-effects from EMS for patients was the largest(75.4%), and the reason of EMS delay due to the request of medical direction was the highest(71.4%) for the reason for responding "not necessary". In regards to the request level of the task scope of emergency medical technicians, injection of certain amount of solution during a state of shock was the highest($3.10{\pm}.96$) for Level 1 emergency rescuers, and the endotracheal intubation was the highest($3.12{\pm}1.03$) for nurses, and the sublingual administration of nitroglycerine(NTG) during chest pain was the highest($2.62{\pm}1.02$) for Level 2 emergency medical technicians, and regulation of heartbeat using AED was the highest($2.76{\pm}.99$) for other emergency crews. For the revitalization of medical direction, the improvement in the capability of EMS(78.9%) was requested from emergency crew, and the ability to evaluate the medical state of patient was the highest(80.1%) in the level of request for medical director. The prehospital and direct medical direction was the highest(60.8%) for medical direction method, and the emergency medical facility was the highest(52.0%) for the placement of medical director, and the evaluation of appropriateness of EMS was the highest(66.1%) for the feedback content, and the reinforcement of emergency crew(emergency medical technicians) personnel was the highest(69.0%) for the improvement plan. Conclusion : The medical direction is an important policy in the prehospital EMS activity because 119 emergency medical technicians agreed the necessity of medical direction and over 80% of those who experienced medical direction said it was helpful. In addition, the simulation training program using algorithm and case study through feedback are necessary in order to enhance the technical capability of ambulance teams on the item of professional EMS with high level of request in the task scope of emergency medical technicians, and recognition of medical direction is the essence of the EMS field. In regards to revitalizing medical direction, the improvement of the task performance capability of 119 emergency medical technicians and medical directors, reinforcement of emergency medical activity personnel, assurance of trust between emergency medical technicians and the emergency physician, and search for professional operation plan of medical direction center are needed to expand the direct medical direction method for possible treatment beforehand through the participation by medical director even at the step in which emergency situation report is received.

An Exploratory Study of Purchasing Decision Making and Adoption on the RFID Purchasing Customer (RFID 구매고객의 구매 의사결정과 수용에 대한 탐색적 연구)

  • Seo, Pil-Su;Jang, Jang-Yi;Shim, Kyeng-Su
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.3 no.4
    • /
    • pp.89-116
    • /
    • 2008
  • RFID (Radio Frequency Identification) is regarded as a core technology of ubiquitous computing. Although it has some technical limitations such as technological standardization of RFID tags as well as economical limitations, many companies around the world have already accepted RFID to improve their management efficiency. In this regard, this study is to meet with results that the adoption of RFID technology willbring opportunities that companies' operational process are improved and customer satisfaction is highly strengthened. This research focuses on providing more understanding for building RFID marketing strategy to suppliers who want to sell their RFID products to customers through analyzing purchasing process. The findings are as follows; First, the study shows that buying center members usually take product reliability and precision of technical specification in the case of new-task buying situation while they put their first purchasing priority on prices in the straight rebuy. Second, the finding presents that in new-task buying situation and the straight rebuy purchasing personnel get information about new products through product performance test, organizational engineers, opinions from other companies' purchasing personnel, and checking out samples. Third, this research demonstrates when it comes to purchasing risk in their first purchasing, the persons who are in charge of material purchasing are inclined to be aware of the risk most in technical problems, followed by financial problems and time delay problems in order. And in addition to those risks are mentioned above, once-again-purchasers take the risk like an opportunity loss for better products into consideration. Fourth, the study shows that the role of concerning departments makes no difference in each purchasing stage. Accordingly marketers need to beef up the differentiated strategy to persuade their customers Fifth, the findings of this study demonstrate that purchasing decision making is much influenced by the final users. So suppliers are supposed to perform the most active marketing strategy at the first stage of purchasing through various resources. Finally, the study presents that the suppliers who will have had close relationships with their customers need to give consistent information to them so that their customers can have lower motive in purchasing products from competitors.

  • PDF

Quality Evaluation by the Addition of Pine Needle and Artemisia princeps Extracts in Vinegared Kochujang (솔잎, 약쑥추출물을 첨가한 초고추장의 품질평가)

  • Kim, Eun-Lyang;Kang, Sun-Chul
    • Applied Biological Chemistry
    • /
    • v.50 no.3
    • /
    • pp.167-177
    • /
    • 2007
  • This study was carried out to develop natural vinegared kochujang. We first formulated vinegared kochujang containing pine needle (PN) and Artemisia princeps (AP) extracts. A dominant strain was isolated from the vinegared kochujang and identified as Bacillus amyloliquefaciens ER282 based on the 16S rDNA sequence. The plant extracts of PN and AP were also investigated for their antibacterial activity and showed enough good activities to use for vinegared kochujang as a natural preservative. Quality characteristics of vinegared kochujang were evaluated, based on total cell numbers, pH, acidity, sugar content, color and sensory evaluation during storage at $25^{\circ}C$ and $37^{\circ}C$, respectively, for 3 weeks. No significant differences were found in the pHs and acidities of vinegared kochujang added with the plant extracts of PN and AP during their storage compared to starting time; however, total cell numbers were gradually decreased during the storage at $25^{\circ}C$ and $37^{\circ}C$, as the storage period was increased. For sensory evaluation, overall preference continuously declined depending on storage period, but the addition of 3% extracts of PN could delay the quality loss of vinegared kochujang during storage at $25^{\circ}C$ and $37^{\circ}C$ for 3 weeks.

Studies on Selection of Freezing Resistant Clones of Cryptomeria japonica (삼(杉)나무 내한성(耐寒性) 품종(品種) 선발(選拔)에 관한 연구(硏究))

  • Hong, Sung Gak;Cho, Tae Hwan;Hwang, Jeung
    • Journal of Korean Society of Forest Science
    • /
    • v.51 no.1
    • /
    • pp.22-35
    • /
    • 1981
  • This study was designed to know difference in degree of dehardening and rehardening respectively by artificial high and low temperature treatments among different clonal seedlings and seedlings from different seed sources of Cryptomeria japonica which have been grown under the cold areas in Japan and Korea. High temperature treatment was done with 15 to $20^{\circ}C$ under 100% relative humidity for one to nine days and low temperature treatment was carried with $-7^{\circ}C$ for one to three days. Occasionaly, high temperature treatment was combined and followed by low temperature treatment. The ability of stem section to delay dehardening by high temperature treatment and/or to hasten rehardening by low temperature treatment was used as an indicator of adaptability under extreme temperature fluctuation in nature. Clones and seedlings from different seed sources which showed greater freezing resistance than others after artificial high and/or low temperature treatments were selected over two to three time periods: early winter, mid winter and early spring in 1977 to 1980. These were Seoul #7, and #9, Namboo #3, and #4, Sung-Kang #11, Chung-Sam #8 and Huek-Suk #9. These selected seedlings might have survival advantage to withstand early and late frost damage, especially the critical frost damage of the basal stem, since it was known to be induced by lowering freezing resistance of the basal part when exposed to the high temperature near the ground during the day. Large variation in freezing resistance and degree of dehardening and rehardening was found among clonal or seed sources and among individuals within a seed source, but was not related to the difference in climatic conditions where the parent trees was selected. These indicated the possibility of future breeding work for more cold resistant family of Cryptomeria japonica.

  • PDF