• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.486-486
• /
• 2000

This paper is concerned with a transfer alignment method for the SDINS(StrapDown Inertial Navigation System) under ship motions. Major error sources of transfer alignment are data transfer time-delay, lever-arm velocity and ship body flexure. Specifically, to reduce alignment errors induced by measurement time-delay effects, the error compensation method through delay state augmentation is suggested. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then it is shown via observability analysis and computer simulations that the delay state can be estimated and compensated during ship motions resulting in considerably less alignment errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2494-2504
• /
• 1996

This paper describes about the spread specturm radio wave propagation characteristics in urban microcells. The experiments are carried out with respect to the mean excess delay, the RMS delay spread, and the received maximum peak power in the two kinds of geogrphical areas, LOS area and N-LOS area, especially whose variations are observed while varying the transmission distance and tilting the transmitting antenna. The typical results obtained in pariticular urban sites in Seoul are 300-600 nsec of mean excess delay and about 75 nsec of averaged RMS delay spread for LOS area, and 270-280 nsec of mean excess delay and about 100 nsec for N-LOS area. With the transmitting antenna gilted, obsered in the experiments are increase in RMS delay spread as expected, but increase of the received power at N-LOS areas in particular.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.371-377
• /
• 2021

This research proposes the best combination of tropospheric delay models for Korean Positioning System (KPS). The overall results are based on real observation data of Japanese Quasi-Zenith satellite system (QZSS), whose constellation is similar to the proposed constellation of KPS. The tropospheric delay models are constructed as the combinations of three types of zenith path delay (ZPD) models and four types of mapping functions (MFs). Two sets of International GNSS Service (IGS) stations with the same receiver are considered. Comparison of observation residuals reveals that the ZPD models are more influential to the measurement model rather than MFs, and that the best tropospheric delay model is the combination of GPT3 with 5 degrees grid and Vienna Mapping Function 1 (VMF1). While the bias of observation residual depends on the receivers, it still remains to be further analyzed.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2456-2467
• /
• 2018

Wireless multimedia sensor networks (WMSNs) require real-time quality-of-service (QoS) guarantees to be provided by the network. The end-to-end delay is very critical metric for QoS guarantees in WMSNs. In WMSNs, due to the transmission errors incurred over wireless channels, it is difficult to obtain reliable delivery of data in conjunction with low end-to-end delay. In order to improve the end-to-end delay performance, the system has to drop few packets during network congestion. In this article, our proposal is based on optimization of end-to end delay for WMSNs. We optimize end-to-end delay constraint by assuming that each packet is allowed fixed number of retransmissions. To optimize the end-to-end delay, first, we compute the performance measures of the system, such as end-to-end delay and reliability for different network topologies (e.g., linear topology, tree topology) and against different choices of system parameters (e.g., data rate, number of nodes, number of retransmissions). Second, we study the impact of the end-to-end delay and packet delivery ratio on indoor and outdoor environments in WMSNs. All scenarios are simulated with multiple run-times by using network simulator-2 (NS-2) and results are evaluated and discussed.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.437-442
• /
• 2005

The measurement of RTT (Round Trip Time) can be used for the analysis of Internet congestion. However, simple measuring of RTT which measures only hun around time of a packet can not infer a packet forward/backward delay variation. In this thesis, we present a new algorithm which can be used for the estimation of forward/backward delay variation of packets. These delay variations are implication of network congestion state. In this algorithm, the reference forward/backward delay can be determined based on the minimum RTT value. The delay variation of each packet can be calculated by comparing reference delay with the packet delay. We verified our proposed algorithm by NS-2 simulation and delay measuring in a real network.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1269-1289
• /
• 2014

With the sub-stepping technique, the numerical analysis in real-time dynamic hybrid testing is split into the response analysis and signal generation tasks. Two target computers that operate in real-time may be assigned to implement these two tasks, respectively, for fully extending the simulation scale of the numerical substructure. In this case, the integration time-step of solving the dynamic response of the numerical substructure can be dozens of times bigger than the sampling time-step of the controller. The time delay between the real and desired feedback forces becomes more striking, which challenges the well-developed delay compensation methods in real-time dynamic hybrid testing. This paper focuses on displacement prediction and force correction for delay compensation in the real-time dynamic hybrid testing with a large integration time-step. A new displacement prediction scheme is proposed based on recently-developed explicit integration algorithms and compared with several commonly-used prediction procedures. The evaluation of its prediction accuracy is carried out theoretically, numerically and experimentally. Results indicate that the accuracy and effectiveness of the proposed prediction method are of significance.

• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.28 no.1
• /
• pp.1-13
• /
• 2024

Hepatocellular carcinoma (HCC) is the sixth most diagnosed cancer worldwide. Healthcare resource constraints may predispose treatment delays. We aim to review existing literature on whether delayed treatment results in worse outcomes in HCC. PubMed, Embase, The Cochrane Library, and Scopus were systematically searched from inception till December 2022. Primary outcomes were overall survival (OS) and disease-free survival (DFS). Secondary outcomes included post-treatment mortality, readmission rates, and complications. Fourteen studies with a total of 135,389 patients (delayed n = 25,516, no delay n = 109,873) were included. Age, incidence of male patients, Child-Pugh B cirrhosis, and Barcelona Clinic Liver Cancer Stage 0/A HCC were comparable between delayed and no delay groups. Tumor size was significantly smaller in delayed versus no delay group (mean difference, -0.70 cm; 95% confidence interval [CI]: -1.14, 0.26; p = 0.002). More patients received radiofrequency ablation in delayed versus no delay group (OR, 1.22; 95% CI: 1.16, 1.27; p < 0.0001). OS was comparable between delayed and no delay in HCC treatment (hazard ratio [HR], 1.13; 95% CI: 0.99, 1.29; p = 0.07). Comparable DFS between delayed and no delay groups (HR, 0.99; 95% CI: 0.75, 1.30; p = 0.95) was observed. Subgroup analysis of studies that defined treatment delay as > 90 days showed comparable OS in the delayed group (HR, 1.04; 95% CI: 0.93, 1.16; p = 0.51). OS and DFS for delayed treatment were non-inferior compared to no delay, but might be due to better tumor biology/smaller tumor size in the delayed group.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.355-362
• /
• 2009

In real-time communication services, delay constraints are among the most important QoS (Quality of Service) factors. In particular, it is difficult to guarantee the delay requirement over wireless channels, since they exhibit dynamic time-varying behavior and even severe burst-errors during periods of deep fading. Channel throughput may be increased, but at the cost of the additional delays when ARQ (Automatic Repeat Request) schemes are used. For real-time communication services, it is very essential to predict data deliverability. This paper derives the delay distribution and the successful delivery probability within a given delay budget using a priori channel model and a posteriori information from the perspective of queueing theory. The Gilbert-Elliot burst-noise channel is employed as an a Priori channel model, where a two-state Markov-modulated Bernoulli process $(MMBP_2)$ is used. for a posteriori information, the channel parameters, the queue-length and the initial channel state are assumed to be given. The numerical derivation is verified and analyzed via Monte Carlo simulations. This numerical derivation is then applied to a rate control scheme for real-time video transmission, where an optimal encoding rate is determined based on the future channel capacity and the distortion of the reconstructed pictures.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.4
• /
• pp.274-284
• /
• 2000

In this paper, the design methodology of digital fuzzy controller(DFC) for the systems with time-delay is presented and the qualitative effects of the quantizers in digital implementation of a fuzzy controllers are investigated. We propose the fuzzy feed-back controller whose output is delayed with unit sampling period and period and predicted. the analysis and the design problem considering time-delay become very easy because the proposed controller is syncronized with the sampling time. The stabilization problem of the digital fuzzy system with time-delay is solved by linear matrix inequality(LMI) theory. Furthermore, we analyze the stability of the quantized fuzzy system. Our results prove that when quantization os taken into account, one only has convergence to some small neighborhood about origin. We develop a fuzzy control system for backing up a computer-simulated truck-trailer with the consideration of time-delay and quantization effect. By using the proposed method, we analyze the quantization effect to the system and design a DFC which guarantees the stability of the control system in the presence of time-delay.

• Explosives and Blasting
• /
• v.18 no.1
• /
• pp.53-58
• /
• 2000

Thermal analysis, analysis of combustion residue and combustion characteristics measure ment such as burning rate or temperature were carried out to clarify the combustion mechanism of a tungsten- potassium perchlorate-barium chromate chromate delay powder. The results obtained are as follows. The main reaction of the delay powder of tungsten-potassium perchlorate-barium chromate is the oxidation of tungsten by potassium perchlorate. Barium chromate acts as a burning rate modifier, and the smaller the larger is the burning rate. Three types of delay composition used in this study show characteristic burning behavior. A stoichiomertric or a oxidizer-rich composition has a small linear burning rate. although it is has a large heat of combustion. On the other hand, a tungsten-excess or a fuel-rich composition with a small heat of combustion has a larger linear burning rate than the former, showing a small fractional oxidation of tungeten (below 10%) contained in the delay powder. From these results, a surface combustion mechanism is proposed for the combustion mechanism of this delay powder.