• 대한산업공학회지
• /
• 제29권3호
• /
• pp.206-212
• /
• 2003

In this paper, we propose a mathematical optimization model with a suitable algorithm to determine delivery and backlogging quantities by minimizing the total cost including the penalty costs for delay. The system has fixed transshipment costs and demands are fulfilled by some delivery units that represent the volume of delivery amount to be shipped in a single time period. Since, backlogging is allowed, demands could be delivered later at the expense of some penalty costs. The model provides the optimal decisions on when and how much to he delivered while minimizing the total costs. To solve the problem, we propose an algorithm that uses the Lagrangian dual in conjunction with some primal heuristic techniques that exploit the special structure of the problem. Finally, we present some computational test results along with comments on the further study.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권2호
• /
• pp.127-134
• /
• 2022

In this paper, a low-cost, flexible GPS simulator based on USRP is designed as a general-purpose software wireless front-end. The simulator consists of a software GPS signal generator and a USRP-based RF transmitter. The simulator supports various scenarios including specified reception time, quantization bit level, I/Q data types, IF frequency, sampling frequency, SNR, ionospheric delay and user dynamics. The generated GPS RF signal is verified using the spectrum analyzer and off-the-shelf GNSS receivers such as U-blox M8T. The experimental results shows that the difference between generated and real live signal is ignorable. It is expected that designed GPS simulator can be used to GNSS signal design, receiver design and signal processing algorithms such as anti-jamming.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.85-86
• /
• 2013

Weakness of fine powder of blast furnace slags includes the decrease of initial intensity and delay of setting time. To solve this problem, there has been research on the alkali activation to induce hardening using alkaline chemical. However, the use of chemicals is dangerous and not cost effective, which can be solved by using recycled aggregates, one of construction wastes. The role of alkali activator can be substituted by alkali of non-hydrated cement included in recycled aggregates. In this study, the alkaline value of recycled aggregates will be evaluated through the comparison of molarity of sodium hydroxide (NaOH).

• 한국도로학회논문집
• /
• 제13권3호
• /
• pp.131-137
• /
• 2011

근래의 폭발적인 차량의 증가와 지가 상승, 도시부 시가지 내에서의 지상공간의 공급한계, 자연환경 및 경관에 대한 사용자 요구수준의 증대 등 여러 이유로 지하공간 개발의 필요성이 증대되고 있다. 지하공간의 개발은 필연적으로 건설비의 증가로 이어지며 대형 구조물의 설치는 도시 미관을 저해하는 요인으로 작용하기 때문에 최근에 가능하면 도심 구조물의 경우 경량화, 소형화 하려는 경향이 있다. 따라서 본 연구에서는 효율적인 지하공간의 개발을 위해 대구광역시의 도시부 도로에 설치되어 운영 중인 지하차도 구조물을 대상으로 미시적 소프트웨어인 VISSIM 5.20을 이용하여 소형차 전용 지하차도 도입에 따른 지체시간의 변화를 분석하였다. 소형차 전용 지하차도 도입 시 운영 방식의 변화를 반영하기 위해 대형차량을 지하차도를 통해 통행시키지 않고 지하차도 상부 평면교차로를 이용해 통행하도록 하였으며, 교통특성에 따른 영향을 분석하기 위해 접근로의 포화도(v/c)와 대형차량 혼입률을 순차적으로 증가시켜 통행시간의 변화를 알아보고 기존 지하차도와 비교 분석하였다. 본 연구의 결과로 미루어 볼 때 소형차 전용 지하차도의 도입은 토지매입에 따른 경제적 손실, 구조물의 대형화에 따른 환경훼손 및 친환경적 녹색교통 측면에서도 유리할 것으로 판단된다.

• 한국정보처리학회논문지
• /
• 제5권11호
• /
• pp.2908-2914
• /
• 1998

본 논문은 교통량이 변하는 복수 교차로망의 신호등 제어에 적합한 지능형 신호 제어기를 제안한다. 교차로망이란 하나의 교차로가 사방으로 연결된 교차로이다. 기존의 교차로 제어방법들은 주로 단일 교차로를 대상으로 연구가 수행되었다. 하지만 단일 교차로 제어는 현실의 교통 상황과는 차이가 있다. 본 논문에서는 교통량과, 녹색 신호시 교차로로 진입하는 차량수와 적색 신호동안 대기하는 차량수를 퍼지 제어의 입력변수로 사용하여, 현재 녹색 현시의 확장시간을 조정하는 퍼지 교통망 제어기를 개발한다. 제안된 방법은 기존의 교차로 신호 주기 제어 방법들과 시뮬레이션을 수행하여 비교하였다. 실험결과는 제안된 퍼지 논리 제어기가 기존의 방법들에 비하여 차량당 지체시간과 논문에서 제안된 비용함수 면에서 우수함을 보여준다.

• 소성∙가공
• /
• 제14권5호
• /
• pp.452-459
• /
• 2005

Gas assisted injection molding (GAIM) is an innovative low-pressure injection molding technique that can provide numerous benefits such as reduced part warpage, excellent surface quality without sink marks, low injection pressure and greater design flexibility. However, adoptions of GAIM may cause unexpected defects since it requires many subtle design factors such as resin shot size, delay time and gas injection pressure, which wouldn't be considered in conventional injection molding process. Therefore, experiences applying GAIM should be collected and examined in order to establish design rules of the new technique. The purpose of this paper is to summarize developing cases of three automotive interior parts such as instrument panel, map pocket folding and center facia side panel so that possibilities and limitations of GAIM were examined. As a result, it is necessary to consider characteristics of GAIM at the initial stage of part design in order to obtain various advantages of the GAIM process without occurring severe defects, which would increase time and cost required to the part development.

• 인터넷정보학회논문지
• /
• 제4권6호
• /
• pp.87-93
• /
• 2003

자료 복제는 분산 시스템과 데이터베이스 시스템에서 가용성과 성능을 향상시켜 주지만, 자료를 갱신할 때 일관성을 엄격하게 유지하는 것은 쉽지 않다. 기존 알고리즘들은 엄격하게 일관성을 유지하지만, 비용이 많이 들며 시간이 지연된다는 문제점이 있다. 본 논문에서는 원본 자료에 대해서 즉시 갱신을 허락하고 다른 복사본들에 대해서는 지연 갱신을 전파하는 혼합 갱신 전파 알고리즘을 소개한다. 혼합 갱신 전파 알고리즘은 또한 소유권에 있어서 그룹 갱신을 허락한다. 이 알고리즘은 그룹 갱신 일관성을 제어하기 위해 복제 버전을 관리한다. 그룹의 소유권을 가지고 즉시 갱신과 지연 갱신을 결합함으로써 일관성과 성능이 향상된다. 응용과 실행 환경에 따른 트랜잭션 처리량과 응답시간의 향상을 모의실험을 통해 보여준다.

• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.116-122
• /
• 2006

Most of the multimedia applications require strict quality of service (QoS) guarantee during the communication between a single source and multiple destinations. This gives rise to the need for an efficient QoS multicast routing strategy. Determination of such QoS-based optimal multicast routes basically leads to a multi-objective optimization problem, which is computationally intractable in polynomial time due to the uncertainty of resources in Internet. This paper describes a network model for researching the routing problem and proposes a new multicast tree selection algorithm based on genetic algorithms to simultaneously optimize multiple QoS parameters. The paper mainly presents a QoS multicast routing algorithm based on genetic algorithm (QMRGA). The QMRGA can also optimize the network resources such as bandwidth and delay, and can converge to the optimal or near-optimal solution within few iterations, even for the networks environment with uncertain parameters. The incremental rate of computational cost can close to polynomial and is less than exponential rate. The performance measures of the QMRGA are evaluated using simulations. The simulation results show that this approach has fast convergence speed and high reliability. It can meet the real-time requirement in multimedia communication networks.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.445-453
• /
• 2015

A fully integrated cost-effective and low-power single chip Lithium-Ion (Li-Ion) battery protection IC (BPIC) for portable devices is presented. The control unit of the battery protection system and the MOSFET switches are integrated in a single package to protect the battery from over-charge, over-discharge, and over-current. The proposed BPIC enters into low-power standby mode when the battery becomes over-discharged. A new auto release function (ARF) is adopted to release the BPIC from standby mode and safely return it to normal operation mode. A new delay shorten mode (DSM) is also proposed to reduce the test time without increasing pin counts. The BPIC implemented in a $0.18-{\mu}m$ CMOS process occupies an area of $750{\mu}m{\times}610{\mu}m$. With DSM enabled, the measured test time is dramatically reduced from 56.82 s to 0.15 s. The BPIC chip consumes $3{\mu}A$ under normal operating conditions and $0.45{\mu}A$ under standby mode.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.261-261
• /
• 2017

This study was carried out to provide basic data for spreading rice direct seeding by inducing stabilization of seedlings, yield and quality according to sowing times in rice direct seeding cultivation. In 2016, 'Sukwang' was seeded 3 times by 10 days interval on May. 10, 20, 30 and 6kg/10ha of seeding rate respectively in Iksan. In summary, the number of rice seedling establishment was higher than the optimum seedling establishment level at all sowing periods and the seeding rate was better as the sowing period was delayed. Weed development by sowing was the highest at early sowing, May 10, and decreased at late sowing. Heading dates were delayed by 3days for sowing on May 10, 7days for sowing on May 20, and 11 days on sowing on May 30. Rice yield increased with the delay sowing time and compared to the transplanting. It was 84% in sowing on May 10, 94% in sowing on May 20, and 99% in sowing on May 30. In addition, head rice ratio and head rice yield increased according to delayed of seedling.